Nauticam M24D2R200 User manual

Current as of 2021-01-26
2508
25082508
25087
77
7 M24D2R200
M24D2R200M24D2R200
M24D2R200-
--
-M28A1R170 HDMI
M28A1R170 HDMI M28A1R170 HDMI
M28A1R170 HDMI
2.0 Cable
2.0 Cable 2.0 Cable
2.0 Cable (for NA
(for NA(for NA
(for NA-
--
-A7RIV
A7RIVA7RIV
A7RIV/
//
/α2020
α2020α2020
α2020 to u e with
to u e with to u e with
to u e with
Ninja V hou ing)
Ninja V hou ing)Ninja V hou ing)
Ninja V hou ing)
Instruction Manual
F
FF
F
OREWORD
OREWORDOREWORD
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recogni e the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximi e its performance as well as its lifetime.
W
WW
W
ARRANTY
ARRANTYARRANTY
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use, and exceptionally HDMI and SDI cables are limited to one
year. This warranty only applies to products purchased from authori ed
NAUTICAM dealers and does not extend beyond the original retail
purchaser.
To return your product for service, please contact your regional
authori ed service centre(s). Please note that this warranty only applies
when the product is purchased in the territory where the service centre is
located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthori ed modifications and/or repairs of our products will
automatically invalidate the warranty.
P
PP
P
RECAUTIONS
RECAUTIONSRECAUTIONS
RECAUTIONS
•Do not place excessive stress on the HDMI cable connector.
•Do not bend or twist the HDMI cable.
•Stop using the HDMI cable once visible cut/dent marks appeared
on the external cable, send the cable for service or replace it with
a new one with an authori ed service center to prevent leakage
risk.
I
II
I
DENTIFICATION OF
DENTIFICATION OF DENTIFICATION OF
DENTIFICATION OF
P
PP
P
ARTS
ARTSARTS
ARTS
C
CC
C
ONNECTING THE CABLE
ONNECTING THE CABLE ONNECTING THE CABLE
ONNECTING THE CABLE TO THE HOUSING
TO THE HOUSING TO THE HOUSING
TO THE HOUSING
Monitor side connector
Camera side connector
1. Unscrew M24 accessory port cap
3. Insert the HDMI 2.0 cable through the
M24 port. It’s recommended to install the
cable first before installing the camera.
4. Gently push the cable into the M24 port
opening of the housing, until it cannot go
in any further.
Make sure the accessory port O-ring is
free of debris and sits tightly in the O-ring
groove.
2. Screw #25086
#25086#25086
#25086 M24 Adaptor for HDMI 2.0
on the M24 port.

Current as of 2021-01-26
C
CC
C
ONNECTING THE CABLE
ONNECTING THE CABLE ONNECTING THE CABLE
ONNECTING THE CABLE TO THE
TO THE TO THE
TO THE
M
MM
M
ONITOR HOUSING
ONITOR HOUSING ONITOR HOUSING
ONITOR HOUSING
S
SS
S
PECIFICATIONS
PECIFICATIONSPECIFICATIONS
PECIFICATIONS
Dimensions(mm): DIA7.0×1000.0
Type: HDMI 2.0 Cable
Compatible
Camera Housings:
17423
NA
-
A7IV Housing
for Sony A7R IV Camera
17427 NA-α2020 Housing for Sony A9II/A7RIV
Camera (with HDMI 2.0 support)
Compatible
Monitor Housings:
17922 Nauticam Atomos Ninja V Housing for
Atomos Ninja V 5” 4Kp60 4:2:2 10-bit
Reorder/Monitor/Player (excl. HDMI 2.0 cable)
17909N Nauticam Atomos Flame Housing
(with HDMI 2.0 input) for Atomos Ninja
Flame/Shogun Flame/Shogun Inferno 7'' 10-bit
4K/HD SDI / HDMI Recorder/Monitor/Player
Remark: Nauticam supports only e-manuals. Please download
corresponding product manuals on Nauticam.com website, or contact
us for e-manuals.
1. Unscrew the M28 accessory port cap on
the monitor housing count-clockwise
2. Align and insert the HDMI 2.0 cable into the
M28 port opening.
Gently push the cable into the M28 port
opening until it cannot go in any further.
5. Then, tighten the cable nut by turning the
threaded locking ring clockwise 3. Then, tighten the HDMI 2.0 cable by
turning the threaded working ring
clockwise.
4. Connect the monitor internal cable with
the monitor.
6. Carefully laying the cable inside housing
as shown.