nbf Signature Series User manual

op Panel-1pc Modesty Panel-1pc Base Leg-1pc
HARDWARE & OOLS
COMPONENS
ools Required for Assembly
Philips Screw Driver for
Cam Lock
INSRUC IONS - We don’t recommend using power tools when installing Cam Posts.
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Cam Post
A B C
D
F
Congratulationsonthepurchaseofyournew ignature eries product!
K Screw Ø4X16mm
Cam Post-3pcs Wood Dowel
Ø8*30mm-2pcs
Screw
M6X15mm-10pcs
Cam Lock-3pcs
Cam Sticker-3pcs
EFGH
I JKM L
N
Screw
Ø4X16mm-29pcs
Mntg Bracket
120*50*3mm-2pcs
D
P
Mntg Bracket
50*30*2mm-4pcs
Screw
Ø6X33mm-5pcs
R
Allen Wrench
4mm-1pc
Allen Wrench
5mm-1pc
Screw
Ø5x20mm-3pcs
Wire Management
ray-2pc
NOTE:
Hardware is packed with
carton IRT4820HA
SEP 1 - Install Right Side
X2J
X8K
B
C
B
C
IRBHAB
S Screw
Ø5x45mm-4pcs
R Screw Ø5x20mm
S Screw Ø5x45mm
IRT4820HA
X2D
X2E
X2F
X2I

Congratulationsonthepurchaseofyournew ignature eries product!
INSRUC IONS - We don’t recommend using power tools when installing Cam Posts.
X4H
X1M
SEP 2
SEP 3
X8K
X2J
X2P
X12k
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB

INSRUC IONS - We don’t recommend using power tools when installing Cam Posts.
SEP 4
SEP 5
X1L
X4S
X3R
X1G
X4G
X1N
X1L
X1N
X4G
X1L
NOTE:
Uninstall the Frame
Mounting Screws, Qty 2,
with Allen Wrench (L). Install
Wire Management ray (N)
to Frame using Screws (G)
and Allen Wrench (L).
Re-install Frame Screws
through Wire Management
ray.
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Congratulationsonthepurchaseofyournew ignature eries product!

INSRUC IONS - We don’t recommend using power tools when installing Cam Posts.
COMPLEED
Height Adjustable Desk
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Congratulationsonthepurchaseofyournew ignature eries product!

Congratulationsonthepurchaseofyournew ignature eries product!
Uninstall the Philips Screws and Allen Screws of the mounting frame, total Qty 4, with Allen
Wrench (L) and tools, then turn around 180° and using screws install the mounting frame to
other pre-drilled holes underside the height adjustable return top.
INSRUCIONS
SEP 1 - Install Left Side
SEP 2
B
CB
C
SEP 3
X2D
X2E
X2J
X8K
X4H
X1M
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB

SEP 4
X2K
X8J
X2P
SEP 5
X1LX4S
X3 R
X1G
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Congratulationsonthepurchaseofyournew ignature eries product!
X12K

SEP 6
X4G
X1N
X1L
X1N
X4G
X1L
NOTE:
Uninstall the Frame Mounting
Screws, Qty 2,
with Allen Wrench (L). Install Wire
Management ray (N) to Frame
using Screws (G) and Allen
Wrench (L). Re-install Frame
Screws through Wire
Management ray.
COMPLEED
Height Adjustable Desk
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Congratulationsonthepurchaseofyournew ignature eries product!

Make sure no obstacles are in the desk's path.
Make sure the desktop is not touching any walls.
Make sure all cords are appropriate length to accommodate
the change in height.
IMPORAN: You must INIIALIZE the desk prior to first use.
Controller Initialization- Press and hold the Down button on the controller until the desk
reaches its lowest height, slightly raises, and stops. Release the down button, your desk
is now ready for use. (Following the "USER MANUALS" to use your desk)
TROUBLESHOOTING
If the table is not functioning properly it may need to be reset.
Unplug the power cord for 20 seconds.
Plug the power cord back in and follow the RESE procedures.
If the error message persists after the reset procedure, please contact
your dealer.
If the height between the legs exceeds 1.5 inches, stop the reset
procedure, please contact your dealer.
INSRUCIONS
48X20" Height Adjustable Return
ASSEMBLY INSRUCIONS
IR4820HA/IRBHAB
Congratulationsonthepurchaseofyournew ignature eries product!