Do notusetheequipmentwithoutthelens screenand thelid;
Thelens and thelighthead covers should betimelyreplaced ifanydamageto rupture
TheFixture should beused with theprotection screen together.
4.5 PREVENTION OFELECTICSHOCK
The electricalconnection mustonlybe carried outwith corresponding qualifications;
Before installing, make sureyou use the powervoltage lampsmustcomplywith the identified
power, voltage and have an overload orleakage protection;
Each lamp mustbe properlygrounded, installed in accordance with the relevantstandards;
Cutoff the powerwhen stall orreplace the lamp and the fuse;
Prohibit the use ofa lightning stormorwetenvironment.
4.6 TOPREVENTBURNING ORFIRE
1. The fixturecan be mounted directlyon thesurface ofordinarycombustible
material.
2. Do notshort-circuit temperature protection switch orfuse, use the specified type offuse.
3. The equipmentmustbe installed awayfrominflammable and explosive materials.
4. The equipmentshouldbe projected rangeof3meters awayobjectsand projectiles
temperature less than 60 C;----3.0m.
5. Fan orventilation, atleastin the range of0.5 meters can notbe an obstacle.
6. Do notplace anyobjecton the lens.
7. Handling atleastallowthe device to coolfor20 minutes.
8. Do notreplace the non-originalparts.
4.7 TRANSPORTPROTECTLOCK
In orderto protectthe light, there isa protectlock;During the transport , the lock will closed
keeping the itemin safetystate.
4.8 ABOUTPACKING
1. Beforepacked, make sure powerisoff, andwait foratleast20minsforcooling down.
2. Before clean the fixture, make sure X,Yaxisprotectlock closed.
3. Afterpacked byplastic bag, high-lift the fixture with two handlesbesidesthe product. put
the productinto the fly-caseup-side-down.
4. Afterpacked theproduct, putthe accessoryinto the accessorycase, then closed andlock the
fly-case.
5. Fly-case onlyup stacked two layers. Prohibited upside down
6. When packed with carton box, equipmentshould be putinto the foamfirst, then setinto a
carton, payattention to the verticalposition.
。
