NEC Silentwriter 1765 User manual

NEC
1765 Network Printer
Configuration Guide
September 1996
808-875036-001A
SILENTWRIT 1700
series

ii 1765 Network Printer Configuration Guide
PROPRIETARY NOTICE AND
LIABILITY DISCLAIMER
The information disclosed in this document, including
all designs and related materials, is the valuable
property of NEC Corporation (NEC) and/or its
licensors. NEC and/or its licensors, as appropriate,
reserve all patent, copyright and other proprietary,
rights to this document, including all design,
manufacturing, reproduction, use, and sales rights
thereto, except to the extent said rights are expressly
granted to others.
The NEC product(s) discussed in this document are
warranted in accordance with the terms of the Warranty
Statement accompanying each product. However, actual
performance of each such product is dependent upon
factors such as system configuration, customer data,
and operator control. Since implementation by
customers of each product may vary, the suitability of
specific product configurations and applications must
be determined by the customer and is not warranted by
NEC.
To allow for design and specification improvements, the
information in this document is subject to change at any
time, without notice. Reproduction of this document or
portions thereof without prior written approval of NEC
is prohibited.
Silentwriter and Print Navigator are registered
trademarks of NEC Corporation. Windows and
Windows 95 are trademarks of Microsoft Corporation.
All other product, service, brand, or trade names used
in this publication are the trademarks or registered
trademarks of their respective companies or
organizations. NEC disclaims any responsibility for
specifying which marks are owned by which companies
or organizations.
First Printing—September 1996
Document Number: 808-875036-001A
Copyright 1996
NEC Technologies, Inc.
1414 Massachusetts Avenue
Boxborough, MA 01719
All Rights Reserved.
Copyright 1996
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-01, Japan
All Rights Reserved.

v
TABLE OF CONTENTS
USING THIS GUIDE iii
CHAPTER 1I
NTRODUCTION
Overview 1-1
Features 1-1
Compatibility 1-3
Hardware Requirements 1-3
Software Requirements 1-4
Qualifications and Assumptions 1-6
Where to Go Next 1-6
CHAPTER 2 1765 SET UP
Overview 2-1
Upgrading from the 1760 2-2
Unpack the 1760 Upgrade Kit 2-2
Install RAM 2-4
Install the LAN Card 2-6
Connecting and Verifying the Silentwriter 1765 2-8
Identify the LAN Card Panel 2-8
Printing a Configuration Page 2-8
Restoring Factory LAN Card Settings 2-8
Connect the Network Cable 2-9
Connecting Thin Coaxial Cable 2-9
Connecting Twisted Pair Cable 2-10
Connecting LocalTalk cable 2-10
Turn On the Printer 2-12
Print a Configuration Page 2-13
CHAPTER 3I
NSTALLING NEC 1765 SOFTWARE
Overview 3-1
Using Silentwriter Software with the
Silentwriter 1765 3-1
The Windows PCL 5e Driver 3-1
The Windows PostScript Driver 3-1
NEC 1765 Software 3-2
Installing NEC 1765 Software for NetWare 3-4
Precautions 3-4
Preparing to Install 3-5
Verifying IPX/SPX Protocol in
Windows 3.1x 3-5
Verifying IPX/SPX Protocol in
Windows 95 3-5
Installing NEC 1765 Administration Software
for NetWare in Windows 3.1x 3-6
Installing NEC 1765 Administration Software
for NetWare in Windows 95 3-6
InstallingNEC 1765ClientSoftwareforNetWare in
Windows 3.1x 3-8
InstallingNEC 1765ClientSoftwareforNetWarein
Windows 95 3-8
Installing NEC 1765 Software for TCP/IP 3-10
Precautions 3-10

vi 1765 Network Printer Configuration Guide
Preparing to Install 3-11
Verifying TCP/IP Protocol in
Windows 3.1x 3-11
Verifying TCP/IP Protocol in
Windows for Workgroups 3-11
Verifying TCP/IP Protocol in
Windows 95 3-11
Installing NEC 1765 Administration Software for
TCP/IP in Windows 3.1x 3-12
Installing NEC 1765 Administration Software for
TCP/IP in Windows 95 3-12
Installing NEC 1765 Client Software for TCP/IP in
Windows 3.1x 3-14
Installing NEC 1765 Client Software for TCP/IP in
Windows 95 3-14
Installing NEC 1765 Software for AppleTalk
Systems 3-16
Preparing to Install 3-16
Installing NEC 1765 Software for AppleTalk 3-16
CHAPTER 4C
ONFIGURING YOUR NETWORK
PRINTER
Overview 4-1
Description of Configuration Process 4-2
NetWare with PCONSOLE 4-3
Select the Operating Mode 4-3
Local Printers 4-3
Network Printers 4-3
Remote Printers 4-4
Install NetWare Client Software at
the Workstation 4-6
Identify the Printer 4-6
Set the Printer Name 4-6
Set the Printer Operating Mode 4-6
Establish the Printer on the NetWare Network
4-8
Define the Print Queue 4-8
Define the Print Server 4-8
Define the Password 4-8
Configure the Print Server 4-9
Configure the Print Queue 4-9
Set the LAN Card Password 4-10
Enable the Remote Printer 4-11
Enable the Remote Printer if the Print Server
Resides on a File Server (NLM Print
Server) 4-11
Enable the Remote Printer if the Print Server
Resides on a Workstation (Dedicated DOS
Print Server) 4-11
Enable the Remote Printer if it is Connected to
a Workstation With a Parallel Cable 4-11
NetWare with NetWare Administrator 4-13
Select the Operating Mode 4-13
Local Printers 4-13
Network Printers 4-13
Remote Printers 4-14
Install NetWare Client Software at
the Workstation 4-16
Identify the Printer 4-16
Set the Printer Name 4-16
Set the Printer Operating Mode 4-16
Establish the Printer on the NetWare Network
4-18
Create a Print Queue Object 4-18

vii
Create a Printer Object 4-18
Create a Print Server Object 4-18
Assign the Print Queue Object to the
Printer Object 4-18
Assign the Printer Object to the Print
Server Object 4-19
Exit NetWare Administrator 4-19
Enable the Remote Printer 4-19
Enable the Remote Printer if the Print Server
Resides on a File Server (NLM Print
Server) 4-19
Enable the Remote Printer if the Print Server
Resides on a Workstation (Dedicated DOS
Print Server) 4-19
Enable the Remote Printer if it is Connected to
a Workstation With a Parallel Cable 4-19
Windows 95 Using TCP/IP Protocol 4-20
Install Software 4-20
Install the Windows 95 Printing System
Utility 4-20
Install TCP/IP Protocol on Windows 95 4-22
Verify Printer Driver Installation 4-22
Establish the Printer on the Network 4-23
Define New Printer Ports 4-24
Windows NT Using TCP/IP Protocol 4-25
Install the Software 4-25
Identify the Printer 4-26
UNIX Using TCP/IP Protocol 4-27
Identify the Printer 4-27
Establish the Printer on the Host Computer 4-28
Add the Silentwriter to the /etc/
printcap File 4-28
Set Up Remote Printing 4-28
Send Documents to the Printer 4-29
Printing With the lpr Command 4-29
Printing With the ftp Command 4-29
Windows NT Using DLC Protocol 4-30
Install the Software 4-30
Identifying the Printer 4-31
AppleTalk 4-32
Select the Network 4-32
Select the Printer 4-33
LAN Manager v2.2 4-34
Install Software 4-34
Identify the Printer 4-35
Print a Document 4-35
OS/2 Warp Server or LAN Server v4.0 4-36
Install Software 4-36
Identify the Printer 4-37
Print a Document 4-38
SNMP 4-39
CHAPTER 5 NEC 1765 ADMINISTRATION SOFT-
WARE
Overview 5-1
NEC 1765 Software 5-1
NEC 1765 Administration Software for NetWare 5-3
Using NEC 1765 Administration Software for
NetWare 5-3
Displaying Available Printers 5-3
Displaying LAN Card Parameters 5-4
Changing the Printer Name 5-4
Changing the Printer Polling Rate 5-4

viii 1765 Network Printer Configuration Guide
Changing the Busy Timeout Time 5-5
Displaying NetWare Network Number and
MAC Address 5-5
Changing NetWare Print Server Name 5-5
Changing the Printer Operating Mode
for NetWare 5-6
Changing NetWare Remote Printer Name
and Number 5-6
Limiting the Silentwriter to a Single File
Server 5-7
Changing NetWare File Server Scanning 5-7
Changing NetWare File Server
Scan Interval 5-7
Changing NetWare File Server Queue Polling
Rate 5-8
Changing NetWare Password 5-8
Changing TCP/IP IP Address 5-9
Changing the TCP/IP Subnet Mask 5-9
Setting the TCP/IP Auto IP Address 5-10
Displaying Silentwriter
Printer Configuration 5-11
Displaying Silentwriter Printer Options 5-12
Changing the Status Polling Rate 5-12
Changing the Response Timeout 5-13
Using Online Help 5-13
NEC 1765 Printer Administration Window 5-14
Printer Administration Menu Bar 5-15
Printer Administration Buttons 5-16
LAN Card Parameters Dialog Box 5-17
NetWare Configuration Dialog Box 5-18
File Server Connection 5-18
Operating Mode 5-19
Remote Printer Information 5-19
Change Password Dialog Box 5-19
NetWare Queue Configuration Dialog Box 5-20
Adding a Queue Assignment 5-20
Removing a Queue Assignment 5-20
Login Dialog Box 5-21
TCP/IP Parameters Dialog Box 5-22
Network Printer Configuration Dialog Box 5-23
Printer Options Dialog Box 5-24
Network Number Dialog Box 5-24
Option Dialog Box 5-25
About NEC Printer Administration Dialog Box
5-26
NEC 1765 Administration Software for TCP/IP 5-27
Using NEC 1765 Administration Software for
TCP/IP 5-27
Displaying Available Printers 5-27
Displaying LAN Card Parameters 5-28
Changing the Printer Name 5-28
Changing the Printer Polling Rate 5-29
Changing the Printer Busy
Timeout Time 5-29
Displaying NetWare MAC Address 5-30
Changing NetWare Print Server Name 5-30
Changing NetWare Operating Mode 5-30
Changing NetWare Remote Printer Name and
Number 5-31
Limiting the Silentwriter to a Single File
Server 5-31
Changing NetWare File Server Scanning 5-32
Changing NetWare File Server
Scan Interval 5-32

ix
Changing NetWare File Server Queue Polling
Rate 5-33
Changing TCP/IP IP Address 5-33
Changing TCP/IP Subnet Mask 5-33
Setting TCP/IP Auto IP Address 5-34
Displaying Silentwriter Printer
Configuration 5-35
Displaying Silentwriter Printer Options 5-35
Changing the Status Polling Rate 5-36
Changing the Response Timeout 5-36
Using Online Help 5-37
Printer Administration Window 5-38
Printer Administration Menu Bar 5-39
Printer Administration Buttons 5-40
LAN Card Parameters Dialog Box 5-41
NetWare Configuration Dialog Box 5-42
File Server Connection 5-42
Operating Mode 5-43
Remote Printer Information 5-43
TCP/IP Parameters Dialog Box 5-44
Network Printer Configuration Dialog Box 5-45
Printer Options Dialog Box 5-46
IP Address Filter Dialog Box 5-46
Time Definition Dialog Box 5-47
Preference Dialog Box 5-48
About NEC 1765 Administration Dialog Box 5-49
NEC 1765 Software for AppleTalk 5-51
Using NEC 1765 Software for AppleTalk 5-51
Displaying Available Printers 5-51
Displaying LAN Card Configuration 5-52
Changing the Printer Polling Rate 5-52
Changing the Busy Timeout Time 5-52
Changing AppleTalk Entities 5-53
Displaying Silentwriter Printer
Information 5-53
Displaying Silentwriter Printer Options 5-54
Changing the Printer Name 5-54
Changing the Printer’s AppleTalk Zone 5-54
Changing the LAN Card Polling Rate 5-55
Changing the LAN Card Response
Timeout 5-55
Using Online Help 5-55
Printer Administration Window 5-56
Printer Administration Menu Options 5-57
Printer Administration Buttons 5-57
LAN Card Configuration Window 5-58
AppleTalk Entity Window 5-59
Network Printer Configuration Window 5-60
Printer Options Window 5-61
Printer Name Window 5-61
Changing the Printer Name 5-61
AppleTalk Zoner Window 5-62
Time Definition Window 5-63
About Window 5-63
CHAPTER 6 NEC 1765 CLIENT SOFTWARE
Overview 6-1
NEC 1765 Client Software 6-1
NEC 1765 Client Software for NetWare 6-2
Using NEC 1765 Client Software for NetWare 6-3
Displaying Printer Status 6-3
Displaying Current Print Jobs 6-3

x 1765 Network Printer Configuration Guide
Deleting Your Current Print Jobs 6-3
Attaching File Servers 6-4
Detaching File Servers 6-4
Displaying Silentwriter
Printer Information 6-4
Displaying Silentwriter Printer Options 6-4
Changing the Status Polling Rate 6-5
Changing the Response Timeout 6-5
Using Online Help 6-5
NEC 1765 Network Printer Client
Access Window 6-6
Network Printer Client Access Menu Bar 6-7
Network Printer Client Access Buttons 6-7
Time Definition Dialog Box 6-8
File Servers Dialog Box 6-9
Login Dialog Box 6-9
Printer Configuration Dialog Box 6-10
Printer Options Dialog Box 6-11
About NEC 1765 Client Software Dialog Box 6-11
Minimized Icon Display 6-11
NEC 1765 Client Software for TCP/IP 6-12
Using NEC 1765 Client Software for TCP/IP 6-12
Displaying Printer Status 6-12
Changing the LAN Card Status
Polling Rate 6-12
Changing the LAN Card Response Timeout
Time 6-12
Displaying Error Messages 6-13
Displaying Silentwriter
Printer Information 6-13
Displaying Silentwriter Printer Options 6-13
Using Online Help 6-13
Client Access Window 6-14
Client Access Menu Bar 6-15
Client Access Buttons 6-15
Option Dialog Box 6-16
Printer Configuration Dialog Box 6-17
Options Dialog Box 6-18
About NEC 1765 Client Dialog Box 6-18
Minimized Icon Display 6-19
Error Dialog Box 6-19
CHAPTER 7I
F
YOU NEED HELP
Overview 7-1
Assistance Nearby 7-1
Help From Within Your Company 7-1
Help From Your Dealer 7-1
NEC Technical Support 7-2
How to Contact NEC 7-2
Contacting NEC Technical Support by
Telephone 7-2
Contacting NEC Customer Service by
Telephone 7-2
Sending Internet Electronic Mail 7-2
Sending a Fax 7-2
Using FastFacts—NEC’s
Information Retrieval System 7-2
Reaching the NEC Bulletin Board System 7-2
Reaching NEC on Compuserve 7-2
Reaching NEC on America Online 7-3
Reaching NEC on the World Wide Web 7-3
Writing NEC 7-3

xi
NEC Warranty and Service 7-3
NEC Service Contracts 7-3
APPENDIX AP
RINTER MESSAGES
Printer Messages A-1
APPENDIX BF
LASH-ROM UPGRADE
Overview B-1
Installing a Flash-ROM Upgrade With NetWare B-2
Preparing to Install B-2
Installing the Upgrade in NetWare B-2
Installing a Flash-ROM Upgrade With ftp B-3
Preparing to Install B-3
Installing the Upgrade in Windows 95 B-3
Installing the Upgrade in Windows for
Workgroups B-4
Installing a Flash-ROM Upgrade With FWTOOL B-5
Preparing to Install B-5
Unloading the Software B-5
Installing the Upgrade B-6
Installing a Flash-ROM Upgrade with AppleTalk B-8
Preparing to Install B-8
Installing the Upgrade across AppleTalk B-8
GLOSSARY
INDEX

xii 1765 Network Printer Configuration Guide

iii
USING THIS GUIDE
This guide includes the information you need to
prepare and operate your NEC® Silentwriter® 1765 for
network printing. This guide contains information
about network utilities and configurations only. Please
refer to the User’s Guide for general operating
information. The seven chapters of this guide are
described below.
Chapter 1, “Introduction”
• Provides an overview of the Silentwriter 1765
networking capabilities and features.
• Includes system and software requirements for
network printing with the Silentwriter 1765.
Chapter 2, “1765 Set Up”
• Shows how to upgrade your 1760 to a 1765 by
installing your new LAN (Local Area Network)
Card and extra RAM.
• Tells how to prepare your printer for network
installation.
Chapter 3, “Installing NEC 1765 Software”
• Provides instructions for installing the NEC 1765
software you’ll use to operate your printer on the
network.
Chapter 4, “Configuring Your Network Printer”
• Provides information about adding the Silentwriter
1765 to your network.
• Tells how to configure both network and printer to
work together.
Chapter 5, “NEC 1765 Administration Software”
Shows how system administrators can use NEC 1765
Administration software to
• Configure the network
• Set printer parameters
• Supervise the network
Chapter 6, “NEC 1765 Client Software”
Shows how 1765 users can use NEC 1765 Client
software to
• Set printer parameters
• Monitor user print requests
Chapter 7, “If You Need Help”
• Contains sources of technical support. For general
problem solving see Chapter 8, “Troubleshooting,”
in the User’s Guide.
If you have not yet set up your printer, begin
with the Easy Printer Setup Guide. It covers
assembly, installing printer options, and
installing printer driver software.
See the User’s Guide for information about
operating and maintaining your printer, and
using printer driver software.

iv 1765 Network Printer Configuration Guide

1–1
INTRODUCTION 1
Overview
This chapter provides the following information about
the Silentwriter 1765.
Features: Lists the features of the Silentwriter 1765
(or an upgraded Silentwriter 1760)
Compatibility: The Silentwriter 1765 can work with
several different operating systems and network
operating systems. This section describes the
system requirements for using the 1765 with each
platform.
Qualifications and Assumptions: The instructions
provided in this guide assume that you have basic
working knowledge about your computer
networks. This section further describes these
assumptions.
Where to Go Next: Lists the steps you’ll need to
complete to set up and operate the Silentwriter 1765
and where to find the information you need.
Features
You may already be familiar with the benefits of the
Silentwriter 1760—its speed, ease of use, and high
quality output. The networking capabilities of the
Silentwriter 1765 enhance this usefulness. The 1765
network printer has the following features in addition
to the standard features of the 1760.
• Runs with several operating systems and network
operating systems including NetWare®, Microsoft®
Windows® 3.1x, Microsoft Windows for
Workgroups® (WFW), Microsoft Windows NT®,
Microsoft Windows® 95, UNIX®, Mac™ OS 7.1 or
greater, and IBM® OS/2® with Microsoft LAN
Manager®, IBM WARP Server®, or IBM LAN
Server®.
• Provides three network ports in addition to the
Silentwriter’s bidirectional parallel port
- Thin wire coaxial Ethernet® (10Base2)
- Unshielded twisted pair Ethernet (10BaseT)
-LocalTalk®
• Network printing does not increase the
Silentwriter’s size because the LAN card is installed
inside the 1765.
• Uses flash-ROM, a rewritable memory that allows
users to upgrade LAN card firmware.
• Supports several frame types, including IEEE 802.2,
IEEE 802.3, Ethernet_II, and Ethernet_SNAP.

1–2 1765 Network Printer Configuration Guide
System administrators and network clients can use
NEC 1765 software to simplify setting up and operating
the Silentwriter 1765. The NEC 1765 Administration
software allows network administrators to define the
network and manage the printer. Administrators can
• Display a list of printers on the network
• Change printer names
• Monitor printer status
• Check printer configuration
• Toggle operation between network and remote
printer modes (NetWare only)
NEC 1765 Client software allows users to
• Confirm or delete their own print jobs
• Monitor printer status
• Check printer configuration

Compatibility 1–3
1Introduction
Compatibility
The Silentwriter 1765 can be used on several different
platforms and operating systems. This section describes
the system requirements to run the Silentwriter 1765 in
different hardware and software environments.
Hardware Requirements
Table 1-1 describes the cables and connectors you need
to connect to different networks.
Table 1-1: Cables and Connectors
Network Type Cable Type Connector Form
Thin Ethernet Thin Ethernet coaxial cable
(10Base2)
UTP Ethernet Twisted pair cable
(10BaseT)
Apple® LocalTalk Mini-DIN 8
(LocalTalk shielded cable)

1–4 1765 Network Printer Configuration Guide
Software Requirements
Table 1-2 shows the operating systems and network
software you will need to configure the
Silentwriter 1765.
In addition to your network software, the Silentwriter
1765 comes with software to help administer your
Silentwriter across the network. Table 1-2 shows which
configurations are supported by NEC 1765 software.
Table 1-2: Software Requirements
To use this
network
protocol with this operating system you will need this network software This NEC 1765 software is
available
IPX/SPX MS-DOS® Client software for NetWare version 3.11,
3.12, or 4.1
MS-DOS and Windows 3.1x Client software for NetWare version 3.12 or
4.1 NEC 1765 Administration and NEC 1765 Client for NetWare
MS-DOS and
Windows for Workgroups 3.11 Client software for NetWare version 3.12 or 4.1 NEC 1765 Administration and NEC 1765 Client for NetWare
Windows 95 network software included with Windows 95
system software NEC 1765 Administration and NEC 1765 Client for NetWare
TCP/IP MS-DOS and Windows 3.1x a third party TCP/IP stack, for example,
Chameleon by NetManage, Inc. (for
Windows 3.1x) or LAN Workplace by
Novell®
NEC 1765 Administration and
NEC 1765 Client for TCP/IP
MS-DOS and
Windows for Workgroups version 3.11 network software included with Windows for Workgroups system software NEC 1765 Administration and NEC 1765 Client for TCP/IP
Windows 95 network software included with Windows 95
system software NEC 1765 Administration and NEC 1765 Client for TCP/IP
Windows 95 Printing System
Windows NT version 3.1 or 3.5x
(server or workstations) network software included with Windows NT system software NEC 1765 Administration and NEC 1765 Client for TCP/IP
UNIX any System V or
BSD compatible system
DLC Windows NT Windows NT Advanced Server 3.1 or
Windows NT Server 3.5x or
Windows NT Workstation 3.5x

Compatibility 1–5
1Introduction
EtherTalk® Mac OS version 7.1 or greater network software included with Mac OS
system software NEC 1765 software for AppleTalk®
LocalTalk® Mac OS version 7.1 or greater network software included with Mac OS
system software NEC 1765 software for AppleTalk
NetBEUI MS-DOS and Windows Microsoft LAN Manager version 2.1 or 2.2
OS/2 Warp version 3.0 IBM LAN Server version 3.0 or 4.0
or IBM Warp Server version 4
Table 1-2: Software Requirements (Continued)
To use this
network
protocol with this operating system you will need this network software This NEC 1765 software is
available

1–6 1765 Network Printer Configuration Guide
Qualifications and Assumptions
This guide assumes that you are familiar with your
system and network layout. Installing the LAN card
and adding the Silentwriter 1765 to your network will
be easier if you
• have used your network operating system
• have the proper network software
• have a fully operational system
In addition, to complete installation and configuration
on the network you must have access to the supervisor
account, or have access to an account that has
supervisor and print server operator privileges.
Where to Go Next
The rest of this document describes the tasks necessary
to complete network installation of the Silentwriter
1765. You will need to complete the following steps:
1. Set up the Silentwriter 1765 or upgrade the
Silentwriter 1760. See Chapter 2, “1765 Set Up.”
2. Install the NEC 1765 Administration software and
NEC 1765 Client software. See Chapter 3,
“Installing NEC 1765 Software.”
3. Connect the Silentwriter to your Network. See
Chapter 4, “Configuring Your Network Printer.”
4. Use NEC 1765 Administration software to configure
the network and printer. See Chapter 5, “NEC 1765
Administration Software.”
Once the Silentwriter has been connected tothe network
and configured properly, users can use NEC 1765 Client
software to manage individual printing jobs. See
Chapter 6, “NEC 1765 Client Software.”

2–1
1765 SET UP2
Overview
This chapter describes how to prepare your new
Silentwriter for network printing. It contains the
following information.
• Upgrading from the 1760
• Connecting and verifying the Silentwriter 1765
We assume that you have completed the steps described
in the Easy Printer Setup Guide.
If you are upgrading your 1760, begin with the
next section.
If you are ready to connect your Silentwriter
1765, proceed to page 2-8.

2–2 1765 Network Printer Configuration Guide
Upgrading from the 1760
Upgrading a 1760 printer to a 1765 network printer
requires the following steps.
1. Unpack the upgrade kit and verify its contents.
2. Install extra RAM (not included).
3. Install the LAN card.
Unpack the 1760 Upgrade Kit
Your upgrade kit should include the following
components
• LAN card (part 805-874292-003A)
•1765 Network Printer Configuration Guide
(part 808-875036-001A)
• Four NEC 1765 software diskettes
(part 819-058006-000)
- Windows® 95 Printing System and OS/2®
Support Software (part 819-055006-000)
- Network Utilities: NetWare® for Windows®
(part 819-055006-001)
- Network Utilities: TCP/IP for Windows®
(part 819-055006-002)
- Network Utilities: AppleTalk® for Mac™ OS
(part 819-055006-003)
• T-shaped BNC connector (for 10 Base2 network
connections)
• Warranty card (part 819-300017-000)