NEC VT800 Series User manual

Portable Projector
VT800
User’s Manual

© NEC Display Solutions, Ltd. 2008
1st edition, February 2008
• IBM is a trademark or registered trademark of International Business Machines Corporation.
• Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries.
• Microsoft, Windows and PowerPoint are trademarks or registered trademarks of Microsoft Corporation.
• Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
• VESA is a registered trademark of Video Electronics Standards Association.
• All Rights Reserved. Corel, the Corel logo, Ulead, the Ulead logo, Ulead Photo Explorer, InterVideo, the Inter-
Video logo, are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries.
• HQV is a registered trademark of Silicon Optix Inc.
• HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other
countries and areas.
• Other product and company names mentioned in this user’s manual may be the trademarks or registered trade-
marks of their respective holders.
NOTES
(1) The contents of this guide may not be reprinted in part or whole without permission.
(2) The contents of this guide are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable
points, errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed
to result from using the Projector.

i
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your NEC VT800 projector and keep the manual handy for future
reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of this
unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE
PRONGS CAN BE FULLY INSERTED.
DOC Compliance Notice (for Canada only)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Acoustic Noise Information Ordinance-3. GSGV (for Germany only):
The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of Califor-
nia to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If this should happen, continue to use your projector. The static background from previous images will
disappear.

ii
Important Information
EU-wide legislation as implemented in each Member State requires that used electrical and electronic
products carrying the mark (left) must be disposed of separately from normal household waste. This in-
cludes projectors and their electrical accessories or lamps. When you dispose of such products, please
follow the guidance of your local authority and/or ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will help us
reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human
health and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European Union Member
States.
Disposing of your used product

iii
Important Information
RF Interference (for USA only)
WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government
regulation could void your right to operate this equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
For UK only: In UK, a BS approved power cable with moulded plug has a Black (five Amps) fuse installed for use
with this equipment. If a power cable is not supplied with this equipment please contact your supplier.
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read
them carefully and heed all warnings.
Installation
• Do not place the projector in the following conditions:
- on an unstable cart, stand, or table.
- near water, baths or damp rooms.
- in direct sunlight, near heaters or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
• If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
- The projector must be installed by qualified technicians in order to ensure proper operation and reduce the
risk of bodily injury.
- In addition, the ceiling must be strong enough to support the projector and the installation must be in accor-
dance with any local building codes.
- Please consult your dealer for more information.
10˚
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

iv
Important Information
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside
your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
• Do not try to touch the ventilation outlet as it can become heated while the projector is turned on.
• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to
retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screw-
driver into your project. If something should fall into your projector, disconnect it immediately and have the object
removed by a qualified service personnel.
• Do not place any objects on top of the projector.
• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.
• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply
fits this requirement before attempting to use your projector.
• Do not look into the lens while the projector is on. Serious damage to your eyes could result.
• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause
unpredictable outcome such as fire or injury to the eyes.
• Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to melting
of the cap and possibly burning your hands due to the heat emitted from the light output.
• Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust
vent.
Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the light
output and exhaust.
• Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire.
- Do not use any power cables than the supplied one.
- Do not bend or tug the power cable excessively.
- Do not place the power cable under the projector, or any heavy object.
- Do not cover the power cable with other soft materials such as rugs.
- Do not heat the power cable.
- Do not handle the power plug with wet hands.
• Turn off the projector, unplug the power cable and have the projector serviced by a qualified service personnel
under the following conditions:
- When the power cable or plug is damaged or frayed.
- If liquid has been spilled into the projector, or if it has been exposed to rain or water.
- If the projector does not operate normally when you follow the instructions described in this user’s manual.
- If the projector has been dropped or the cabinet has been damaged.
- If the projector exhibits a distinct change in performance, indicating a need for service.
• Disconnect the power cable and any other cables before carrying the projector
• Turn off the projector and unplug the power cable before cleaning the cabinet or replacing the lamp.
• Turn off the projector and unplug the power cable if the projector is not to be used for an extended period of time.
• When using a LAN cable:
For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

v
Lamp Replacement
• To replace the lamp, follow all instructions provided on page 117.
• Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE.
PLEASE REPLACE THE LAMP.] appears. If you continue to use the lamp after the lamp has reached the end
of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch
them as the pieces of glass may cause injury.
If this happens, contact your dealer for lamp replacement.
A Lamp Characteristic
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on
and off will increase the possibility of its lower brightness.
CAUTION:
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass
fragments could fall if the lamp has been burned out.
Important Information
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not heat, take apart, or throw batteries into fire.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries’ polarity (+/–) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
CAUTION
• Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry
or hang (from the wall or ceiling) the projector can cause damage to the projector.
• Do not send the projector in a soft case by parcel delivery service or cargo shipment. The projector inside the
soft case could be damaged.
• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select
[SETUP - OPTIONS] →[FAN MODE] →[HIGH].)
• Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so
can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch
and a breaker.
• The projector can be unplugged during its cool down period after it is turned off.
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is
blinking green. Doing so could cause premature lamp failure.

vi
Important Information
About High Altitude mode
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 me-
ters or higher.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTI-
TUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
• Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE]
can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical
components such as the lamp.

vii
Table of Contents
Important Information............................................................................................i
1. Introduction.......................................................................................................... 1
What’s in the Box?......................................................................................................... 1
Introduction to the Projector .......................................................................................... 2
Congratulations on Your Purchase of the Projector................................................. 2
Features you’ll enjoy :.............................................................................................. 2
About this user’s manual.......................................................................................... 3
Part Names of the Projector .......................................................................................... 4
Front/Top ................................................................................................................. 4
Rear ......................................................................................................................... 4
Bottom...................................................................................................................... 5
Top Features............................................................................................................ 6
Terminal Panel Features.......................................................................................... 7
Part Names of the Remote Control ............................................................................... 8
Battery Installation ................................................................................................... 9
Operating Range for Wireless Remote Control ....................................................... 9
Remote Control Precautions.................................................................................... 9
2. Installation and Connections ................................................................... 10
Setting Up the Screen and the Projector..................................................................... 10
Selecting a Location............................................................................................... 10
Making Connections.................................................................................................... 11
Connecting Your PC or Macintosh Computer........................................................ 11
Connecting an External Monitor............................................................................. 13
Connecting Your HDMI Compatible Equipment..................................................... 14
Connecting Your DVD Player with Component Output.......................................... 15
Connecting Your VCR............................................................................................ 16
Connecting to a Network........................................................................................ 17
Connecting the Supplied Power Cable .................................................................. 19
3. Projecting an Image (Basic Operation) .............................................. 20
Turning on the Projector.............................................................................................. 20
Note on Startup screen (Menu Language Select screen)...................................... 21
Selecting a Source ...................................................................................................... 22
Selecting the computer or video source................................................................. 22
Adjusting the Picture Size and Position....................................................................... 23
Adjusting the focus (Focus ring) ............................................................................ 24
Finely adjusting the size of an image (Zoom lever) ............................................... 24
Adjusting the Tilt Foot ............................................................................................ 25
Correcting Keystone Distortion.................................................................................... 26
Optimizing an RGB Image Automatically .................................................................... 28
Adjusting the Image Using Auto Adjust.................................................................. 28
Adjusting Volume Up & Down ..................................................................................... 28
Turning off the Projector.............................................................................................. 29
After Use...................................................................................................................... 30

viii
Table of Contents
4. Convenient Features..................................................................................... 31
Turning Off the Image and Sound ............................................................................... 31
Freezing a Picture ....................................................................................................... 31
Enlarging and Moving a Picture................................................................................... 31
Changing Lamp Mode ................................................................................................. 32
Getting Integrated Help ............................................................................................... 32
Using a USB Mouse .................................................................................................... 33
Operate the Menus using the USB mouse ............................................................ 33
Using the Optional Remote Mouse Receiver (NP01MR) ............................................ 34
Correcting Horizontal and Vertical Keystone Distortion (Cornerstone) ....................... 36
Cornerstone ........................................................................................................... 36
9Displaying Two Pictures at the Same Time................................................................. 39
Selecting the PIP or SIDE BY SIDE Mode [MODE]............................................... 39
POSITION ............................................................................................................. 40
Preventing Unauthorized Use of the Projector ............................................................ 41
Assigning a Keyword for the first time.................................................................... 41
Checking If Security is enabled.............................................................................. 44
Disabling the Security ............................................................................................ 45
Limiting Access Level to Available Menu Items........................................................... 46
LOperation Using an HTTP Browser............................................................................. 49
Overview................................................................................................................ 49
Preparation Before Use ......................................................................................... 49
Handling of the Address for Operation via a Browser............................................ 49
Structure of the HTTP Server ................................................................................ 50
MProjecting Your Computer’s Screen Image from the Projector via a Network
[NETWORK PROJECTOR] ................................................................................... 52
NUsing the Projector to Operate Your Computer via a Network [REMOTE
DESKTOP]............................................................................................................. 56
5. Using the Viewer ............................................................................................. 61
Making the Most out of the Viewer Function ............................................................... 61
Features................................................................................................................. 61
Easy to use ............................................................................................................ 61
Simple utility software (for computer)..................................................................... 61
Saving data to a USB memory device......................................................................... 61
Using Ulead Photo Explorer 8.0 (optional)............................................................. 61
Using Windows Explorer to save files.................................................................... 61
Operating the Viewer Function from the Projector (playback)..................................... 62
Projecting slides (Viewer) ...................................................................................... 62
Operating Viewer Menu ......................................................................................... 62
Setting Option for Viewer....................................................................................... 64
THUMBNAILS menu.............................................................................................. 64
Exiting Viewer ........................................................................................................ 65
Changing Background Logo........................................................................................ 66

ix
Table of Contents
6. Using On-Screen Menu................................................................................ 67
Using the Menus.......................................................................................................... 67
Using ADVANCED menu and BASIC menu.......................................................... 68
Entering alphanumeric characters by using Software Keyboard ........................... 68
Menu tree .................................................................................................................... 69
Menu Elements............................................................................................................ 71
Menu Descriptions & Functions [SOURCE] ................................................................ 72
COMPUTER 1 and 2 ............................................................................................. 72
HDMI...................................................................................................................... 72
VIDEO.................................................................................................................... 72
S-VIDEO ................................................................................................................ 72
VIEWER................................................................................................................. 72
NETWORK............................................................................................................. 72
ENTRY LIST .......................................................................................................... 72
Menu Descriptions & Functions [ADJUST].................................................................. 75
[PICTURE] ............................................................................................................. 75
[IMAGE OPTIONS] ................................................................................................ 78
[VIDEO].................................................................................................................. 82
[AUDIO].................................................................................................................. 83
Menu Descriptions & Functions [SETUP].................................................................... 84
[BASIC] .................................................................................................................. 84
[MENU] .................................................................................................................. 92
[INSTALLATION (1)].............................................................................................. 93
[INSTALLATION (2)].............................................................................................. 95
[OPTIONS]........................................................................................................... 108
Menu Descriptions & Functions [INFO.] .................................................................... 110
[USAGE TIME]..................................................................................................... 110
[SOURCE (1)] ...................................................................................................... 111
[SOURCE (2)] ...................................................................................................... 111
[WIRED LAN]....................................................................................................... 112
[VERSION (1)] ..................................................................................................... 112
[VERSION (2)] ..................................................................................................... 112
Menu Descriptions & Functions [RESET].................................................................. 113
Returning to Factory Default................................................................................ 113
7. Maintenance .................................................................................................... 114
Cleaning or Replacing the Filter ................................................................................ 114
Cleaning the Cabinet and the Lens ........................................................................... 116
Replacing the Lamp................................................................................................... 117

x
Table of Contents
8. Appendix............................................................................................................. 120
Troubleshooting......................................................................................................... 120
Indicator Messages.............................................................................................. 120
Specifications ............................................................................................................ 123
Cabinet Dimensions .................................................................................................. 125
Screen Size and Projection Distance ........................................................................ 126
Pin Assignments of D-Sub COMPUTER 1/2 Input Connector .................................. 128
Mini D-Sub 15 Pin Connector .............................................................................. 128
Compatible Input Signal List...................................................................................... 129
PC Control Codes and Cable Connection................................................................. 130
PC Control Codes................................................................................................ 130
Cable Connection ................................................................................................ 131
PC Control Connector (D-SUB 9P)...................................................................... 131
Troubleshooting Check List....................................................................................... 132
TravelCare Guide ...................................................................................................... 134

1
1. Introduction
What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your Projector.
OFF
COMPUTER
VIDEO
ABCDEF
JKL
GHIMNO
TUV
PQRSWXYZ
.
@/
S-VIDEO
VIEWWRNETWORK
HDMI
PIP
MAGNIFY
VOLUME
PICTURELAMPMODEASPECT
AV-MUTE3DREFORMFREEZE
ID SET
LENSSHIFTFOCUS/ZOOM
HELP
UP
DOWN
PAGE
CLEAR
MENU
L-CLICK R-CLICK
ENTER
EXIT
1
1 2 3
45 6
78
0
9
23
COMPONENT
AUTOADJ.
POWER
ID
ID
Lens cap
(24FU0141)
Remote control
(7N900811)
Batteries (AA x 2)
Power cable
(7N080204) US
(7N080011) EU
VGA signal cable
(7N520052)
CD-ROM
User’s manual
(7N951191)
For North America only
Registration card
Limited warranty
For Europe only
Guarantee policy
• Security sticker
• Important Infomation (7N8P8541)
• Quick Setup Guide (7N8P8531)
Projector
Soft Case
(24BS7851)

2
1. Introduction
Introduction to the Projector
This section introduces you to the VT800 projector and describes key features and controls.
Congratulations on Your Purchase of the Projector
The VT800 is a sophisticated XGA projector that produces an enhanced display. With the VT800 you will be able to
project images up to 500" (measured diagonally). Enjoy crisp and sharp large screen display from your PC, work-
station or Macintosh computer, DVD player, VCR, satellite hookup, HDTV source, as well as images from your USB
storage device. The VT800 provides for enhanced security options to help deter projector theft and provides for full
projector control through the PC control port (D-Sub 9 Pin) and LAN support. With input and output flexibility, long
lamp life and a full function remote, the VT800 lets you enjoy larger than life viewing from a compact and easy to
setup and use projector.
Features you’ll enjoy :
• LCD projector with high resolution and high brightness
High resolution display - up to UXGA compatible, XGA native resolution.
• Direct Power Off & Auto Start
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even
when projecting an image) using a power strip equipped with a switch and a breaker.
The AUTO POWER ON feature eliminates the need to always use the POWER button on the remote control or
projector cabinet.
• Integrated RJ-45 connector for wired networking
An RJ-45 connector is equipped as standard features.
• Windows Vista standard functions Network Projector and Remote Desktop can be used
A Windows Vista-based computer can be operated using the projector over a network.
The projector supports the Network Projector function and the Remote Desktop function of Windows Vista.
• A variety of input ports and a comprehensive array of system control interfaces
This projector supports input signals on the following ports: HDMI, 15pin D-Sub, composite and S-video.
• Wall Color Correction
Built-in Wall Color Correction presets provide for adaptive color correction when projecting onto non-white
screen material (or a wall).
• Six picture preset modes for user adjustable picture and color settings
Each picture preset mode can be customized and memorized according to your preference.
• Preventing unauthorized use of the projector
Enhanced smart security settings for password protection, cabinet control panel lock, and USB memory protec-
tion key to help prevent unauthorized access, adjustments and theft deterrence.

3
About this user’s manual
The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll
find an overview. If the section doesn’t apply, you can skip it.
1. Introduction

4
ACIN
VIDEOIN
AUDIOIN
USB
LAN
AUDIOIN
HDMIIN
AUDIOIN
COMPUTER/
COMPONENT2IN
COMPUTER/
COMPONENT1IN
PCCONTROL
MONITOROUTAUDIOOUT
S-VIDEOIN
AUDIOIN
L/MONO
L/MONO
R
R
USB
LAMP
STATUS
SOURCE
AUTOADJUST
3DREFORM
SELECT
USB
LAMP
STATUS
SOURCE
AUTOADJUST
3DREFORM
SELECT
1. Introduction
Part Names of the Projector
Controls
(→page 6)
Built-in Security Slot ( )*
Zoom Lever
(→page 24)
Lens Cap
Remote Sensor
(→page 9)
Focus Ring
(→page 24)
Adjustable Tilt Foot Lever
(→page 25)
* This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kens-
ington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.
Ventilation (inlet) / Filter
(→page 114)
Adjustable Tilt Foot
(→page 25)
Lens
Front/Top
Ventilation (inlet) / Filter
(→page 114)
Speaker (5W monaural)
AC Input
Connect the supplied power cable’s three-pin plug here,
and plug the other end into an active wall outlet.
(→page 19)
Main Power Switch
When you plug the supplied power cable into an active
wall outlet and turn on the Main Power switch, the POW-
ER indicator turns orange and the projector is in standby
mode.
(→page 20)
Remote Sensor
(→page 9)
Ventilation (outlet)
Heated air is exhausted from
here.
Rear
Terminal Panel
(→page 7)
Security bar

5
1. Introduction
Bottom
Lamp Cover
(→page 117)
Filter cover (Rear)
(→page 115)
Filter cover (Front)
(→page 115)
NOTE: “FRONT” and “REAR” are
inscribed inside the filter cover.
Rear Foot
(→page 25)

6
1. Introduction
Top Features
1. POWER Button ( ) (→page 20, 29)
NOTE: To turn on the projector, press and hold this button
for a minimum of two seconds. To turn off the projector,
press this button twice.
2. POWER Indicator (→page 20, 29, 120)
3. STATUS Indicator (→page 120)
4. LAMP Indicator (→page 117, 120)
5. USB Indicator
Lights when a USB memory is inserted into the USB
port.
NOTE: The USB indicator will not light when non-USB stor-
age devices such as USB mouse devices are inserted.
6. SOURCE Button
7. AUTO ADJUST Button (→page 28)
8. 3D REFORM Button (→page 26, 36)
9. MENU Button
10. SELECT  / Volume Buttons
11. ENTER Button
12. EXIT Button
USB
LAMP
STATUS
SOURCE
AUTO ADJUST
3D REFORM
SELECT
12
1 4 5
2 3
678
11
10
9

7
1. Introduction
Terminal Panel Features
1. COMPUTER 1 IN/COMPONENT 1 IN Connector
(Mini D-Sub 15 Pin) (→page 11,13,15)
AUDIO IN (Stereo Mini Jack) (→page 11,13,15)
2. COMPUTER 2 IN/COMPONENT 2 IN Connector
(Mini D-Sub 15 Pin) (→page 11,15)
AUDIO IN (Stereo Mini Jack) (→page 11)
3. HDMI IN (19 Pin HDMI Type A) (→page 12,14)
4. S-VIDEO IN Connector (Mini DIN 4 Pin) (→page
16)
AUDIO L/MONO, R (RCA) (→page 16)
5. VIDEO IN Connector (RCA) (→page 16)
AUDIO L/MONO, R (RCA) (→page 16)
6. MONITOR OUT Connector (Mini D-Sub 15 Pin)
(→page 13)
AUDIO OUT (Stereo Mini Jack) (→page 13)
7.
PC CONTROL Port (D-Sub 9 Pin) (→page 130, 131)
Use this port to connect your PC or control system
to control your projector via a serial cable. This
enables you to control the projector using serial
communication protocol. A commercially available
RS232C cross cable is required to use this port.
You can also control the projector by using PC Con-
trol Utility 3.0 (downloadable from our website:http:
www.nec-pj.com). To do so you must first have PC
Control Utility 3.0 installed on your PC. If you are
writing your own program, typical PC control codes
are on page 130.
8. USB Port (Type A) (→page 33)
9. LAN Port (RJ-45) (→page 18, 98)
The actual appearance of the terminal panel may differ slightly from that shown in the drawing, but this does not af-
fect the projector’s performance.
WIRELESS
WIRELESS
USB (LAN )
VIDEO IN
AUDIO IN
USB
LAN
AUDIO IN
HDMI IN
AUDIO IN
COMPUTER /
COMPONENT 2 IN
COMPUTER /
COMPONENT 1 IN
PC CONTROL
MONITOR OUT AUDIO OUT
S-VIDEO IN
AUDIO IN
L/MONO
L/MONO
R
R
2
6 75
110 4 38 9

8
1. Introduction
Part Names of the Remote Control
1. Infrared Transmitter
2. POWER ON Button (→page 20)
NOTE: To turn on the projector, press and hold the POWER
ON button for a minimum of two seconds.
3. POWER OFF Button (→page 29)
NOTE: To turn off the projector, press the POWER OFF but-
ton twice.
4. COMPUTER 1 Button (→page 22)
5. COMPUTER 2 Button (→page 22)
6. COMPUTER 3 Button
(not available on this model)
7. AUTO ADJ. Button (→page 28)
8. VIDEO Button (→page 22)
9. S-VIDEO Button (→page 22)
10. COMPONENT Button (→page 22)
(not available on this model)
11. HDMI Button (→page 22)
OFF ON
COMPUTER
VIDEO S-VIDEO
VIEWER NETWORK
HDMI
PIP
MAGNIFYVOLUME
PICTURE LAMP MODE ASPECT
AV-MUTE 3D REFORM FREEZE
ID SET LENS SHIFT
RD 434E
FOCUS
/ZOOM HELP
PAGE
MENU
L-CLICK R-CLICK
EXIT
COMPONENT
AUTO ADJ.
1 32
4 65
7 98
0
CLEAR
ENTER
UP
DOWN
POWER
ID
ID
1 2 3
2
10
15
17
1
3
4
8
12
16
5
9
7
11
14
13
6
21
22
29
27
28
31
32
30
24
23
26
25
34
33
19
18 20
12. VIEWER Button (→page 22, 62)
13. NETWORK Button (→page 22)
14. PIP Button (→page 40)
15. Numeric Keypad Button/CLEAR Button
(→page 107)
16. MENU Button
17. SELECT  Button
18. ENTER Button
19. EXIT Button
20. MOUSE R-CLICK Button (→page 35)
21. MOUSE L-CLICK Button (→page 35)
22. VOLUME +/– Buttons (→page 28)
23. MAGNIFY +/– Buttons (→page 31)
24. PAGE UP/DOWN Buttons (→page 35)
25. FREEZE Button (→page 31)
26. ASPECT Button (→page 80)
27. PICTURE Button (→page 75, 77)
28. AV-MUTE Button (→page 31)
29. LAMP MODE Button (→page 32)
30. 3D REFORM Button (→page 26, 36)
31. ID SET Button (→page 107)
32. LENS SHIFT Button (not available on this model)
33. FOCUS/ZOOM Button (not available on this model)
34. HELP Button (→page 32)