NEC NP-M300WS User manual

NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 1 of 6
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts Pg 2
Cabinet Dimensions Pg 3-4
Ceiling Mount Dimensions Pg 5
Input Panel and Control Codes Pg 6
Product Description
Type: 3 panel LCD projector, Dimensions: 15.7” (W) x 5.5” (H) x 12.2” (D)
0.59”p-SiTFTw/MLA Weight: 8.8lbs
Resolution:1280x800
Brightness: 3000 Lumens Fan Noise: 36 dB / 30dB @ 1 meter
BTU’s: 1222 BTU/hour Power Consumption: 358W (max)
Lens Specifications
Throw Ratio: 0.48:1 (for 100” diagonal) Focal Length: 17.5mm – 29.0mm
Offset Angle: 37.3° (for 100” diagonal) F/#: 1.7 - 2.1
Screen Sizes: 56.2” - 104” diagonal (16:10) Manual Focus
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on a 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 16:10ScreenFormulas:
W = Image Width W = H x 16/10
H = Image Height (size) H = W x 10/16
B = Vertical distance between lens center and screen center Screen Diagonal = W x 18.868/16
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
α= Throw Angle
Projection Formulas:
B= 0.375W
C = 0.48W (wide)
D= 0.0625W
α= tan-1(B/C)

NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 2 of 6
Diagrams and Distance Charts
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of
installation.
Distances are in inches. For millimeters multiply by 25.4.
CeilingMounted Desktop
Distance Chart for popular 16:10 screens
Note: For screen sizes not indicated on the projection
table, use the formulas on page 1.
Diagonal Width(W) Height (H)
inches inches inches inches inches inches degrees
57 48 30 18 23 3 38.0
60 51 32 19 25 3 38.0
70 59 37 22 28 4 38.0
79 67 42 25 32 4 38.0
91 77 48 29 37 5 38.0
10085533241 538.0
10488553342 638.0
D
α
Image Size (16:10) on a
(16:10) screen B C



NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 3 of 6
Cabinet Dimensions
The following drawings show the cabinet dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.

NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 4 of 6
Cabinet Dimensions (continued)
The following drawings show the cabinet dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.

NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 5 of 6
Optional Ceiling Mount Dimensions (Model #: MP300CM)
The following drawings show the ceiling mount dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.
M300WS with Optional Ceiling Mount (Model #: MP300CM)
M300WS with Optional Long Throw Mount (Model #: NPLTWM)
3.00
No Offset from Center

NEC Display Solutions of America, Inc.
M300WS Installation Guide
Ceiling Mounted and Desktop Rev 1.2
www.necdisplay.com M300WS Page 6 of 6
Input / Output Panel
PC Control Codes
Function CodeData
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT COMPUTER1 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT COMPUTER2 02H 03H 00H 00H 02H 01H 02H 0AH
INPUTSELECTHDMI 02H 03H 00H 00H 02H 01H 1AH 22H
INPUTSELECTVIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUTSELECTS-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
INPUTSELECTVIEWER 02H 03H 00H 00H 02H 01H 1FH 27H
INPUT SELECT NETWORK 02H 03H 00H 00H 02H 01H 20H 28H
INPUT SELECT USB DISPLAY 02H 03H 00H 00H 02H 01H 22H 2AH
PICTUREMUTEON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUNDMUTEOFF 02H 13H 00H 00H 00H 15H
PROJECTOR INFORMATION REQUEST 00H BFH 00H 00H 01H 02H C2H
ERROR STATUS REQUEST 00H 88H 00H 00H 00H 88H
INFORMATION REQUEST 03H 8AH 00H 00H 00H 8DH
Note: Contact your NEC rep for codes not listed.
Cable Connection
Communication Protocol:
Baud Rate: 38400 bps
Data Length: 8 bits
Parity: No Parity
Stop Bit: One Bit
X on/off: None
Communications: Full duplex
PC Control Connector (D-Sub 9P)
NOTE 1 : Pins 1, 4, 6, and 9 are used inside the projector.
NOTE 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps.
NOTE 3: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
12345
67 8 9
To GND of PC
To RxD of PC
To TxD of PC
To CTS of PC
To RTS of PC