NEC Express5800/120Rg-1 User manual

N8100-1241F/1242F/1243F/
1244F/1245F/1246F/
1313F/1314F/1327F/
1328F/1329F/1330F/
1331F/1332F
NEC Express5800/120Rg-1
User's Guide
2nd Edition
1-2007
ONL-4152cN-120Rg1-100-99-0612

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Corporation (NEC) and /or its licensors. NEC and/or its licensors, as
appropriate, reserve all patent, copyright and other proprietary rights to this document, including all
design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are
expressly granted to others.
The NEC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator control.
Since implementation by customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not warranted by NEC.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC is prohibited.
Second Printing, January 2007
First Printing, August 2006
Copyright 2006, 2007
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-8001, Japan
All Rights Reserved
Printed in Japan

Keep this User's Guide at hand for quick reference at anytime necessary.
SAFETY INDICATIONS
Follow the instructions in this User's Guide for your safety to use the server.
The server contains components with possible danger, hazards that may cause by ignoring
warnings, and preventive actions against such hazards.
Server components with possible danger are indicated with a warning label placed on or around
them as well as described in this User's Guide.
In the User's Guide or warning labels, "WARNING" or "CAUTION" is used to indicate a degree of
danger. These terms are defined as follows:
WARNING Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
CAUTION Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
Precautions and notices against hazards are presented with one of the following three symbols. The
individual symbols are defined as follows:
This symbol indicates the presence of a hazard if the instruction is ignored.
An image in the symbol illustrates the hazard type. (Attention)
This symbol indicates prohibited actions. An image in the symbol illustrates a
particular prohibited action. (Prohibited Action)
This symbol indicates mandatory actions. An image in the symbol illustrates a
mandatory action to avoid a particular hazard. (Mandatory Action)
(Example)
Symbol to draw attention
Term indicating a degree of danger
CAUTION
Hot surface
Immediately after the server is powered off, its internal components such as
hard disk drives are very hot. Leave the server until its internal components
fully cool down before installing/removing any component.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger

SYMBOLS USED IN THIS USER'S GUIDE AND WARNING
LABELS
Attentions
Indicates that improper use may cause an electric shock.
Indicates that improper use may cause personal injury.
Indicates that improper use may cause explosion or burst.
Indicates that improper use may cause fingers to be caught.
Indicates that improper use may cause personal injury.
Indicates that improper use may cause fumes or fire.
Indicates a general notice or warning that cannot be specifically identified.
Prohibited Actions
Do not disassemble, repair, or modify the server. Otherwise, an electric shock or fire
may be caused.
Keep water or liquid away from the server. Otherwise, an electric shock or a fire may
be caused.
Do not touch the server components with wet hand. Otherwise, an electric shock may
be caused.
Do not place the server near a fire. Otherwise, a fire may be caused.
Do not touch any other component than specified. Otherwise, an electric shock or
burn may be caused.
Indicates a general prohibited action that cannot be specifically identified.
Mandatory Action
Unplug the power cord of the server. Otherwise, an electric shock or fire may be
caused.
Be sure to provide earthing. Otherwise, an electric shock or fire may be caused.
Indicates a mandatory action that cannot be specifically identified. Make sure to follow
the instruction.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CE Statement
Warning: This is a Class A product. In domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures (EN55022).
BSMI Statement
Notes:
(1) No part of this manual may be reproduced in any form without the prior written permission of
NEC Corporation.
(2) The contents of this User's Guide may be revised without prior notice.
(3) The contents of this User's Guide shall not be copied or altered without the prior written
permission of NEC Corporation.
(4) All efforts have been made to ensure the accuracy of all information in this User's Guide. If
you notice any part unclear, incorrect, or omitted in this User's Guide, contact the sales agent
where you purchased this product.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or
consequential damages arising from the use of this User's Guide regardless of Item (4).
(6) If you find any missing pages or pages out of order in this manual, please contact your dealer
for a replacement.

Trademarks
NEC DianaScope, NEC ESMPRO and NEC EXPRESSBUILDER are trademarks of NEC Corporation.
Microsoft, Windows, Windows Server, Windows NT, and MS-DOS are registered trademarks or trademarks of
Microsoft Corporation in the United States and other countries.
Intel, Pentium, and Xeon are registered trademarks of Intel Corporation.
Datalight is a registered trademark of Datalight, Inc.
ROM-DOS is a trademark of Datalight, Inc.
LSI-Logic, MegaRAID, MegaRAID Storage Manager and Power Console Plus are registered trademarks or
trademarks of LSI Logic Corp.
Novell and NetWare are registered trademarks of Novell, Inc. of the United States.
AT is a registered trademark of International Business Machines Corporation in the United States and other
countries.
Adaptec and its logo are registered trademarks of Adaptec, Inc. of United States.
SCSISelect is a trademark of Adaptec, Inc. of the United States.
Adobe, Adobe logo, and Acrobat are trademarks of Adobe Systems Incorporated.
DLT and DLTtape are trademarks of Quantum Corporation of the United States.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of
their respective trademark owners.
Windows Server 2003 x64 Editions stands for Microsoft®Windows Server®2003 R2, Standard x64 Edition
Operating system and Microsoft®Windows Server®2003 R2, Enterprise x64 Edition operating system, or
Microsoft® Windows Server®2003, Standard x64 Edition operating system and Microsoft®Windows
Server®2003, Enterprise x64 Edition operating system. Windows Server 2003 stands for Microsoft®
Windows Server®2003 R2, Standard Edition operating system and Microsoft® Windows Server®2003 R2,
Enterprise Edition operating system, or Microsoft® Windows Server®2003, Standard Edition operating
system and Microsoft®Windows Server®2003, Enterprise Edition operating system.
Windows XP x64 Edition stands for Microsoft® Windows® XP Professional x64 Edition operating system.
Windows XP stands for Microsoft® Windows® XP Home Edition operating system and Microsoft®
Windows®XP Professional operating system. Windows 2000 stands for Microsoft®Windows®2000 Server
operating system and Microsoft®Windows®2000 Advanced Server operating system, and Microsoft®
Windows®2000 Professional operating system. Windows NT stands for Microsoft®Windows NT®Server
network operating system version 3.51/4.0 and Microsoft®Windows NT®Workstation operating system
version 3.51/4.0. Windows Me stands for Microsoft®Windows®Millennium Edition operating system.
Windows 98 stands for Microsoft®Windows®98 operating system. Windows 95 stands for Microsoft®
Windows®95 operating system.
Momentary voltage drop prevention:
This product may be affected by a momentary voltage drop caused by lightning. To prevent a
momentary voltage drop, an AC uninterruptible power supply (UPS) unit should be used.

i
PREFACE
Welcome to the NEC Express5800/120Rg-1 server.
The NEC Express5800 server holds powerful performance and employs the latest technology to
implement a computer for the next generation. With its potential capabilities, the server may be used
as the workstation PC that configures a client-server system and provides high-speed processing and
superior reliability.
Read this User's Guide thoroughly to fully understand handling of the server and appreciate its
functions to the maximum extent.

ii
ABOUT THIS USER'S GUIDE
This User's Guide is a guide for proper setup and use of the server.
This User's Guide also covers useful procedures for dealing with difficulties and problems that may
arise during setup or operation of the server.
Keep this manual for future use.
The following describes how to proceed with this User's Guide.
How to Use This User's Guide
To aid you in finding information quickly, this User's Guide contains the following information:
Chapter 1 Notes on Using Your Server
includes information that needs attention to use the server. Make sure to read this chapter
before setting up and using the server. It also includes requirements and advisory information
for transfer and disposal of the server.
Chapter 2 General Description
includes information necessary to use the server, such as names and functions of its
components, handling of the DVD-ROM drive.
Chapter 3 Setting Up Your Server
tells you how to select a site, unpack the system, assemble the rack-mount subsystem, make
cable connections, and power on your system.
Chapter 4 Configuring Your Server
tells you how to configure the system and provides instructions for running the BIOS SETUP
Utility and the RAID configuration utility, which is used to configure RAID drives in your
system. This chapter also provides information on mother board jumper settings.
Chapter 5 Installing the Operating System with Express Setup
describes how to install the operating system.
Chapter 6 Installing and Using Utilities
describes how to install the utilities for the server. It also includes a description on using the
attached "NEC EXPRESSBUILDER" CD-ROM.
Chapter 7 Maintenance
provides you with all the information necessary to maintain successful operation of the server.
This chapter also includes a description on relocating and storing the server.
Chapter 8 Troubleshooting
contains helpful information for solving problems that might occur with your system.
Chapter 9 Upgrading Your Server
provides you with instructions for upgrading your system with an additional processor, optional
memory, optional add-in cards, hard disk drives, peripheral devices, and power supply.
Appendix A Specification
provides specifications for your server.
Appendix B Other Precautions
provides supplementary notes on using the server.

iii
Appendix C IRQ and I/O Port Address
provides a list of factory-set IRQs and I/O port addresses assigned.
Appendix D Installing Windows Server 2003 x64 Editions
describes how to install Microsoft Windows Server 2003 x64 Editions without using Express
Setup. Using the Express Setup tool is recommended for installing Windows Server 2003 x64
Editions. See Chapter 5 for details.
Appendix E Installing Windows Server 2003
describes how to install Microsoft Windows Server 2003 without using Express Setup. Using
the Express Setup tool is recommended for installing Windows Server 2003. See Chapter 5
for details.
Appendix F Product Configuration Record Table
provides a table to be filled with your server configuration.
Text Conventions
The following conventions are used throughout this User's Guide. For safety symbols, see
"SAFETY INDICATIONS" provided earlier.
IMPORTANT: Items that are mandatory or require attention when using the server
NOTE: Helpful and convenient piece of information
IN THE PACKAGE
The carton contains various accessories, as well as the server itself. See the packing list or "Getting
Started" guide to make sure that you have everything and that individual components are not
damaged. If you find any component missing or damaged, contact your sales agent.

iv
CONTENTS
Preface ..............................................................................................................................................i
About This User's Guide..................................................................................................................ii
In the Package................................................................................................................................ iii
Chapter 1 Notes on Using Your Server ........................................................................ 1-1
Warning Labels ............................................................................................................................ 1-2
Safety Notes................................................................................................................................. 1-3
General .................................................................................................................................... 1-3
Power Supply and Power Cord Use......................................................................................... 1-5
Rack......................................................................................................................................... 1-6
Installation, Relocation, Storage, and Connection................................................................... 1-7
Cleaning and Working with Internal Devices .......................................................................... 1-9
During Operation................................................................................................................... 1-10
For Proper Operation ..................................................................................................................1-11
Transfer to Third Party............................................................................................................... 1-13
Disposal and Consumables ........................................................................................................1-14
User Support .............................................................................................................................. 1-15
Chapter 2 General Description ..................................................................................... 2-1
Overview...................................................................................................................................... 2-2
External View .......................................................................................................................... 2-3
Front View with Front Bezel Closed ....................................................................................... 2-4
Front View with Front Bezel Removed ................................................................................... 2-5
Rear View ................................................................................................................................ 2-6
Internal View ........................................................................................................................... 2-8
Mother Board .........................................................................................................................2-11
Status Indicators......................................................................................................................... 2-12
POWER LED ........................................................................................................................ 2-12
STATUS LED........................................................................................................................ 2-12
DISK ACCESS LED ............................................................................................................. 2-14
ACT LED .............................................................................................................................. 2-14
UID LED (UID) .................................................................................................................... 2-14
Disk Access LED................................................................................................................... 2-14
Hard Disk Drive LED............................................................................................................ 2-15
LAN Connector LEDs........................................................................................................... 2-16
AC POWER LED (SAS Hot-swap Hard Disk Model Only)................................................. 2-17
Standard Features....................................................................................................................... 2-18
Remote Management Feature................................................................................................ 2-19
Degradation Feature .............................................................................................................. 2-20
Memory RAS Features .......................................................................................................... 2-20
Remote Power-On Feature (Wake On LAN)......................................................................... 2-20
AC-Link Feature.................................................................................................................... 2-20
System Security..................................................................................................................... 2-21
NEC EXPRESSBUILDER ........................................................................................................ 2-22
NEC ESMPRO .......................................................................................................................... 2-23
Off-line Maintenance Utility...................................................................................................... 2-23

v
System Diagnostic Utility...........................................................................................................2-23
NEC DianaScope........................................................................................................................2-23
Using Your Server.......................................................................................................................2-24
Front Bezel.............................................................................................................................2-24
POWER Switch......................................................................................................................2-26
Identification of Servers ~ UID Switch ~...............................................................................2-31
DVD-ROM Drive...................................................................................................................2-32
Chapter 3 Setting Up Your Server ................................................................................ 3-1
Setup Flow....................................................................................................................................3-2
Selecting Server Site.....................................................................................................................3-3
Unpacking the System ..................................................................................................................3-5
Installing the Server......................................................................................................................3-6
Restricted Access Location ......................................................................................................3-7
ESD Precaution ........................................................................................................................3-7
Checking Components .............................................................................................................3-7
Required Tools .........................................................................................................................3-7
Installation Procedure for NEC Rack/Third Vendor's Rack .....................................................3-8
Removing the Server from the Rack Assembly......................................................................3-14
Connecting Peripheral Devices...................................................................................................3-16
Connecting Power Cord..............................................................................................................3-18
Turning On the Server ................................................................................................................3-20
Installing Operating System .......................................................................................................3-21
Installing Utilities .......................................................................................................................3-21
Making Backup Copies of System Information..........................................................................3-21
Chapter 4 Configuring Your Server.............................................................................. 4-1
System BIOS (SETUP).................................................................................................................4-1
Starting SETUP Utility.............................................................................................................4-2
Description on On-Screen Items and Key Usage .....................................................................4-3
Menu and Parameter Descriptions ...........................................................................................4-4
RAID Configuration ...................................................................................................................4-21
Onboard RAID Features.........................................................................................................4-21
Installing the Hard Disk Drives..............................................................................................4-22
Enabling RAID Feature..........................................................................................................4-22
Running LSI Logic Software RAID Setup Utility .................................................................4-25
Menu Tree ..............................................................................................................................4-27
Operating Procedures for Setup Utility ..................................................................................4-28
Configuring Mother Board Jumpers ...........................................................................................4-38
Chapter 5 Installing the Operating System with Express Setup............................... 5-1
About Express Setup ....................................................................................................................5-2
Installation Notice.........................................................................................................................5-3
Installation Flow ...........................................................................................................................5-8
Installing the Windows Server 2003.............................................................................................5-9
Installing and Setting Device Drivers.........................................................................................5-14
PROSet...................................................................................................................................5-14
Network Driver ......................................................................................................................5-15
Optional Network Board Driver.............................................................................................5-17
Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB).........................................5-18

vi
Graphics Accelerator Driver.................................................................................................. 5-19
SCSI Controller Driver (N8103-75/95/N8190-126).............................................................. 5-19
Disk Array Controller Driver (N8103-80F)........................................................................... 5-19
Notes on Using the N8103-75 Controller Board ................................................................... 5-20
Available switch options for Windows Server 2003 Boot.ini file.......................................... 5-21
Setting for Solving Problems ..................................................................................................... 5-22
Memory Dump (Debug Information) .................................................................................... 5-22
Windows Dr. Watson ............................................................................................................. 5-25
Network Monitor ................................................................................................................... 5-26
Installing Maintenance Utilities ................................................................................................. 5-26
Updating the System – Installing Service Pack – ...................................................................... 5-27
Making Backup Copies of System Information......................................................................... 5-27
Installing with the OEM-FD for Mass Storage Device.......................................................... 5-28
Chapter 6 Installing and Using Utilities ....................................................................... 6-1
NEC EXPRESSBUILDER .......................................................................................................... 6-2
NEC EXPRESSBUILDER for DOS-Based with Local Console ............................................ 6-4
NEC EXPRESSBUILDER for DOS-based with Remote Console.......................................... 6-9
NEC EXPRESSBUILDER for Windows-Based (Master Control Menu) ............................. 6-13
Configuration Diskette Creator..................................................................................................6-14
NEC ESMPRO .......................................................................................................................... 6-18
Functions and Features ..........................................................................................................6-18
Web-based Promise Array Manager........................................................................................... 6-19
Power Console Plus ................................................................................................................... 6-20
Major Functions..................................................................................................................... 6-20
Components........................................................................................................................... 6-20
Server Setup .......................................................................................................................... 6-22
Management PC Setup .......................................................................................................... 6-23
NEC DianaScope ....................................................................................................................... 6-24
MegaRAID Storage ManagerTM (Server)................................................................................... 6-25
Setup with Express Setup ...................................................................................................... 6-25
Manual Setup......................................................................................................................... 6-25
MegaRAID Storage ManagerTM (Management PC) .................................................................. 6-25
Chapter 7 Maintenance.................................................................................................. 7-1
Making Backup Copies................................................................................................................ 7-1
Cleaning....................................................................................................................................... 7-2
Cleaning the Server ................................................................................................................. 7-3
Cleaning the Interior................................................................................................................ 7-4
Cleaning the Keyboard/Mouse ................................................................................................ 7-5
Cleaning Disc .......................................................................................................................... 7-6
System Diagnostics...................................................................................................................... 7-7
Test Items ................................................................................................................................ 7-7
Startup and Exit of System Diagnostics .................................................................................. 7-8
Relocating/Storing The Server....................................................................................................7-11
Chapter 8 Troubleshooting ........................................................................................... 8-1
System Viewers............................................................................................................................ 8-2
LEDs............................................................................................................................................ 8-3
Error Messages ............................................................................................................................ 8-4

vii
Error Messages after Power-on ................................................................................................8-4
POST Error Messages ..............................................................................................................8-5
Beep Codes...............................................................................................................................8-9
Error Messages on Virtual LCD .............................................................................................8-10
Solving Problems........................................................................................................................8-13
Problems with the Server .......................................................................................................8-13
Problems with Disk Array Configuration...............................................................................8-19
Problems with Windows Server 2003 x64 Editions ...............................................................8-20
Problems with Windows Server 2003 R2...............................................................................8-21
Problems with Windows Server 2003 ....................................................................................8-22
Problems with NEC EXPRESSBUILDER ............................................................................8-24
Problems with Express Setup .................................................................................................8-25
Problems with Master Control Menu .....................................................................................8-27
Problems with Configuration Diskette Creator ......................................................................8-28
Problems with Disk Array Configuration...............................................................................8-28
Collecting Dr. Watson Diagnostic Information...........................................................................8-29
Memory Dump ...........................................................................................................................8-29
Preparing for Memory Dumping............................................................................................8-29
Saving the Dump File.............................................................................................................8-30
Off-Line Maintenance Utility .....................................................................................................8-31
Starting the Off-line Maintenance Utility...............................................................................8-31
Features of Off-line Maintenance Utility ...............................................................................8-32
Resetting the Server....................................................................................................................8-33
Forced Shutdown........................................................................................................................8-33
Chapter 9 Upgrading Your Server ................................................................................ 9-1
Safety Notes..................................................................................................................................9-2
Anti-static Measures .....................................................................................................................9-3
Preparing Your System for Upgrade .............................................................................................9-4
Hard Disk Drive............................................................................................................................9-8
Installation..............................................................................................................................9-10
Removal .................................................................................................................................9-14
Power Supply Unit (SAS Hot-plug HDD Model) ......................................................................9-18
Installation..............................................................................................................................9-18
Replacing a Failing Power Supply Unit .................................................................................9-21
Drive Cover ................................................................................................................................9-22
Removal .................................................................................................................................9-22
Installation..............................................................................................................................9-22
Logic Cover ................................................................................................................................9-23
Removal .................................................................................................................................9-23
Installation..............................................................................................................................9-24
DIMM.........................................................................................................................................9-25
Installation Order....................................................................................................................9-26
Installation..............................................................................................................................9-27
Removal .................................................................................................................................9-29
Using the Memory RAS Features ..........................................................................................9-30
Processor (CPU) .........................................................................................................................9-36
Installation..............................................................................................................................9-37
Removal .................................................................................................................................9-43
PCI Board ...................................................................................................................................9-44

viii
Notes...................................................................................................................................... 9-45
Installation ............................................................................................................................. 9-46
Removal................................................................................................................................. 9-49
RAID Controller Board.............................................................................................................. 9-50
Installation ............................................................................................................................. 9-50
Removal................................................................................................................................. 9-51
Use of internal hard disk drives in a disk array configuration ............................................... 9-51
Disk Expansion Unit.............................................................................................................. 9-54
Appendix A Specifications ........................................................................................... A-1
SATA Hard disk drive models.....................................................................................................A-1
SAS 3.5-Inch Hard disk drive models......................................................................................... A-3
SAS 2.5-Inch Hard disk drive models......................................................................................... A-4
Appendix B Other Precautions.................................................................................... B-1
Transfer Rate of the On-board LAN Controller.......................................................................B-1
Server Management Software .................................................................................................B-1
Floppy Disk .............................................................................................................................B-1
CD/DVD Discs........................................................................................................................B-4
Tape Media ..............................................................................................................................B-4
Keyboard .................................................................................................................................B-5
Mouse ......................................................................................................................................B-6
Appendix C IRQ............................................................................................................. C-1
Appendix D Installing Windows Server 2003 x64 Editions ....................................... D-1
Notice.......................................................................................................................................... D-1
Optional Board Supported by NEC EXPRESSBUILDER..................................................... D-1
Installing Service Pack ........................................................................................................... D-3
Updating System .................................................................................................................... D-3
Re-installing to the Hard Disk which has been upgraded to Dynamic Disk........................... D-3
Manual Installation when N8103-80F Keeps Connection...................................................... D-3
Mounting MO Device............................................................................................................. D-3
About Removable Media........................................................................................................ D-3
Floppy Disk Drive .................................................................................................................. D-3
Creating Partition Size............................................................................................................ D-4
Installing Windows Server 2003 x64 Editions............................................................................ D-5
Creating "Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER"D-5
Windows Server 2003 x64 Editions Clean Installation .......................................................... D-7
Reinstallation to Multiple Logical Drives ............................................................................ D-10
Updating the System.............................................................................................................D-12
Driver Installation and Advanced Settings................................................................................ D-13
PROSet ................................................................................................................................. D-13
Network Driver..................................................................................................................... D-14
Optional Network Board Driver ........................................................................................... D-16
Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)....................................... D-17
Graphics Accelerator Driver................................................................................................. D-18
SCSI Controller Driver (N8103-75) ..................................................................................... D-19
SCSI Controller Driver (N8103-95/8190-126)..................................................................... D-19
Disk Array Controller Driver (N8103-80F).......................................................................... D-20

ix
Setting for Collecting Memory Dump (Debug Information)..................................................D-20
Appendix E Installing Windows Server 2003 ..............................................................E-1
Notice .......................................................................................................................................... E-1
Optional Board Supported by NEC EXPRESSBUILDER...................................................... E-1
Application of Service Pack .................................................................................................... E-2
Installing Service Pack ............................................................................................................ E-2
Updating System ..................................................................................................................... E-2
Re-installing to the Hard Disk which has been upgraded to Dynamic Disk ........................... E-3
Manual Installation when N8103-80F Keeps Connection....................................................... E-3
Mounting MO Device ............................................................................................................. E-3
About Removable Media ........................................................................................................ E-3
Floppy Disk Drive................................................................................................................... E-3
Creating Partition Size ............................................................................................................ E-4
Installing Windows Server 2003..................................................................................................E-5
Creating "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" .......................... E-5
Windows Server 2003 Clean Installation ................................................................................ E-7
Reinstallation to Multiple Logical Drives ............................................................................. E-10
Updating the System .............................................................................................................E-12
Driver Installation and Advanced Settings ................................................................................ E-13
PROSet.................................................................................................................................. E-13
Network Driver ..................................................................................................................... E-14
Graphics Accelerator Driver.................................................................................................. E-16
SCSI Controller Driver (N8103-75/95/N8190-126).............................................................. E-17
Disk Array Controller Driver (N8103-80F)........................................................................... E-18
Notes on Using the N8103-75 Controller Board ................................................................... E-19
About Windows Activation ................................................................................................... E-20
Available Switch Options for Windows Server 2003 Boot.ini File ....................................... E-22
Setting for Collecting Memory Dump (Debug Information).................................................. E-23
Appendix F Product Configuration Record Table ...................................................... F-1
Hardware................................................................................................................................. F-1
Software .................................................................................................................................. F-3

x
(This page is intentionally left blank.)

Chapter 1
Notes on Using Your Server
This chapter includes information necessary for proper and safe operation of the server.

1-2 Notes on Using Your Server
WARNING LABELS
The warning label is attached to components with possible danger or their vicinity in your server to
inform the user that a hazardous situation may arise when operating the server. (Do not intentionally
remove or damage any of the labels.)
If you find any labels totally/partially removed or illegible due to damage, contact your sales
representative.

Notes on Using Your Server 1-3
SAFETY NOTES
This section provides notes on using the server safely. Read this section carefully to ensure proper
and safe use of the server. For symbols, see "SAFETY INDICATIONS" provided earlier.
General
WARNING
Do not use the server for services where critical high availability may directly
affect human lives.
Your server is not intended to be used with or control facilities or devices
concerning human lives, including medical devices, nuclear facilities and
devices, aeronautics and space devices, transportation facilities and devices;
and facilities and devices requiring high reliability. NEC assumes no liability for
any accident resulting in personal injury, death, or property damage if the
server has been used in the above conditions.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the server and
disconnect the power plug from the outlet, then contact your service
representative. Using the server in such conditions may cause a fire.
Keep needles or metal objects away from the server.
Do not insert needles or metal objects into ventilation holes in the server or
openings in the DVD-ROM drive. Doing so may cause an electric shock.
Do not use the server in any unapproved place.
Install the server on a standard EIA 19-inch rack assembly. Do not install the
rack containing the server in a place inappropriate to the rack installation
environment.
Failure to follow these instructions may cause some bad influences to be
imposed on the server and other systems installed on the rack and also a fire or
personal injury due to falling of the rack may occur. For the detailed explanation
on the place where the server should be installed and the earthquake-resistant
construction for the rack, refer to the manual attached to the rack or contact you
service representative.
Always install the server on a rack conforming to the relevant standard.
Install the server on a rack confirming to the EIA standard for the Server to be
used. Do not use the server with installed on any other rack than standard EIA
19-inch rack or without the installation on a proper rack. Failure to follow these
instructions may cause the server to operate incorrectly and/or personal injury
or damages of surrounding devices to occur. Contact your service
representative for the racks available for the server.

1-4 Notes on Using Your Server
CAUTION
Keep water or foreign matter away from the server.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper
clips) enter the server. Failure to follow this warning may cause an electric
shock, a fire, or a failure of the server. When such things accidentally enter the
server, immediately turn off the power and disconnect the power plug from the
outlet. Do not disassemble the server. Contact your service representative.