nedis WIFIPS10WT User manual

2
1 2

English
3
WIFIPS10xxx
Smart power plug
Description
1. On/o button
Reset button
2. On o indicator
Connection status indicator
Use
1. Download and install the app“Nedis SmartLife“ from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app“Nedis SmartLife“.
3. Create a new account or log in to your existing
account.
4. Tap“+”to add the device.
5. Select the applicable product type from the list of
products.
6. Connect the smart switch in between the cable you
want to switch. Make sure the input and output sides
are placed correct so the input side always has 230V.
7. If the status indicator does not ash: Press and hold
the reset button for 6 seconds.
If the status indicator ashes: Conrm in the app.
8. Confrm the Wi-Fi network and password.
9. Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
Safety
• To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
• Disconnect the product from the mains and other
equipment if a problem should occur.
• Read the manual carefully before use. Keep the
manual for future reference.
• Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
• Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
• The device is suitable for indoor use only. Do not use
the device outdoors.
• Do not expose the product to water or moisture.
• Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
• Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support