NENUTEC NEAA 08 Series User manual

D-220A.E-205/CW25-13 1 / 4
■ NEAA…08/16/24 (S) series
NEAA…08/16/24 (S) seriesNEAA…08/16/24 (S) series
NEAA…08/16/24 (S) series
■ NENUTEC stan ar amper actuators are especially
esigne an pro uce for applications in the HVAC
systems.
■ Our wi e range of NENUTEC stan ar amper
actuators has been evelope to operate an position
air ampers of ifferent sizes.
■ Torque 8 Nm / 16 Nm / 24 Nm
■ Damper size 1.5 m
2
/ 3.0 m
2
/ 4.5 m
2
■ Power Supply AC/DC 24 V an AC 230 V
■ Control 2 Point an 3 Point
■ 2 a justable auxiliary switches (SPDT)
■ Shaft imensions
Ø 10 to 20 mm roun /  10 to 16 mm square
■ Minimum shaft length 50 mm
■ Selectable irection of rotation
■ A justable angle of rotation
■ Cable connection with glan on request
■ Customer version on request
Torque
TorqueTorque
Torque Running Time
Running TimeRunning Time
Running Time Power Supply
Power SupplyPower Supply
Power Supply Auxiliary Switches
Auxiliary SwitchesAuxiliary Switches
Auxiliary Switches Mo el / Type
Mo el / TypeMo el / Type
Mo el / Type
8 Nm 35…45 sec AC/DC 24 V ± 15% 2 x SPDT NEAA24-08 S
8 Nm 35…45 sec AC 230 V ± 10% 2 x SPDT NEAA230-08 S
8 Nm 35…45 sec AC/DC 24 V ± 15% No NEAA24-08
8 Nm 35…45 sec AC 230 V ± 10% No NEAA230-08
16 Nm 90…110 sec AC/DC 24 V ± 15% 2 x SPDT NEAA24-16 S
16 Nm 90…110 sec AC 230 V ± 10% 2 x SPDT NEAA230-16 S
16 Nm 90…110 sec AC/DC 24 V ± 15% No NEAA24-16
16 Nm 90…110 sec AC 230 V ± 10% No NEAA230-16
24 Nm 140…160 sec AC/DC 24 V ± 15% 2 x SPDT NEAA24-24 S
24 Nm
140…160 sec AC 230 V ± 10% 2 x SPDT NEAA230-24 S
24 Nm 140…160 sec AC/DC 24 V ± 15% No NEAA24-24
24 Nm 140…160 sec AC 230 V ± 10% No NEAA230-24
Pro uct Features
Pro uct FeaturesPro uct Features
Pro uct Features
Mo el Selection Table
Mo el Selection TableMo el Selection Table
Mo el Selection Table
Rotary Damper Actuator
Rotary Damper ActuatorRotary Damper Actuator
Rotary Damper Actuator
Stan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 NmStan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 Nm
2 Point an 3 Point Control
2 Point an 3 Point Control2 Point an 3 Point Control
2 Point an 3 Point Control
The performance specifications are nominal an conform to acceptable in ustry stan ar s. NENUTEC shall not be liable for amages resulting from misapplication or misuse of its pro ucts. www.nenutec.com
The pro uct picture might not be congruent with technical specifications.

D-220A.E-205/CW25-13 2 / 4
Technical Specifications
Technical SpecificationsTechnical Specifications
Technical Specifications
Torque 8 Nm / 16 Nm / 24 Nm 8 Nm / 16 Nm / 24 Nm
Damper Size 1.5 m
2
/ 3.0 m
2
/ 4.5 m
2
1.5 m
2
/ 3.0 m
2
/ 4.5 m
2
Frequency 50 - 60 Hz 50 - 60 Hz
Auxiliary Switch Rating 3 (1.5) A, AC 230 V 3 (1.5) A, AC 230 V
Ambient Humi ity 5%…95% rH non con ensing / EN 60730-1 5%…95% rH non con ensing / EN 60730-1
Operating Temperature -20°…+50° C / IEC 721-3-3 -20°…+50° C / IEC 721-3-3
Angle of Rotation 0°…90° (93° mechanical) 0°…90° (93° mechanical)
Weight 1.2 Kg - 1.4 Kg 1.3 Kg - 1.5 Kg
Soun Level 45 B (A) 45 B (A)
- En Position 0.4 W 1.2 W
Power Consumption
Mo e of Operation Type I / EN 60730-1 Type I / EN 60730-1
Power Supply
AC/DC 24 V ± 15% AC 230 V ± 10%
Control Signal 2 point an 3 point 2 point an 3 point
- Operating 3.9 W / 3.9 W / 4.0 W 4.8 W / 4.8 W /3.5 W
Protection Class III II
For Wire Sizing 6.5 VA 6.5 VA
Angle of Limiting 0°…90° in 5° steps 0°…90° in 5° steps
IP Protection IP 54 ( ust protecte & protecte against splash water) IP 54 ( ust protecte & protecte against splash water)
Life Cycle 60’000 rotation 60’000 rotation
Maintenance Maintenance free Maintenance free
Non-Operating Temperature -30°…+60° C / IEC 721-3-2 -30°…+60° C / IEC 721-3-2
EMC
CE accor ing to 89 / 336 / EEC CE accor ing to 89 / 336 / EEC
NEAA24...(S)
NEAA24...(S)NEAA24...(S)
NEAA24...(S) NEAA230…(S)
NEAA230…(S)NEAA230…(S)
NEAA230…(S)
Actuator Dimensions (mm)
Actuator Dimensions (mm)Actuator Dimensions (mm)
Actuator Dimensions (mm)
Shaft imensions Ø 10 to 20 mm roun /  10 to 16 mm square Ø 10 to 20 mm roun /  10 to 16 mm square
III
The performance specifications are nominal an conform to acceptable in ustry stan ar s. NENUTEC shall not be liable for amages resulting from misapplication or misuse of its pro ucts. www.nenutec.com
Rotary Damper Actuator
Rotary Damper ActuatorRotary Damper Actuator
Rotary Damper Actuator
Stan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 NmStan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 Nm
2 Point an 3 Point Control
2 Point an 3 Point Control2 Point an 3 Point Control
2 Point an 3 Point Control

D-220A.E-205/CW25-13 3 / 4
Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)
Parallel Connection
Parallel ConnectionParallel Connection
Parallel Connection
Remark
RemarkRemark
Remark
A justment of Auxiliary Switches NEAA24/230…(S)
A justment of Auxiliary Switches NEAA24/230…(S)A justment of Auxiliary Switches NEAA24/230…(S)
A justment of Auxiliary Switches NEAA24/230…(S)
Switch a
aa
a factory-set at 10º
Switch b
bb
b factory-set at 80º
The auxiliary switches can be
optimally a juste between
0°...90°.
0º
0º0º
0º
90º
90º90º
90º
90º
90º90º
90º
0º
0º0º
0º
0º...90º
Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)
Auxiliary Switches
Auxiliary SwitchesAuxiliary Switches
Auxiliary Switches
Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)Wiring Diagram NEAA24/230…(S)
Wiring Diagram NEAA24/230…(S)
Power Supply AC/DC 24 V
Power Supply AC/DC 24 V Power Supply AC/DC 24 V
Power Supply AC/DC 24 V -
--
- AC 230 V
AC 230 VAC 230 V
AC 230 V
Changing Direction of Rotation NEAA24/230…(S)
Changing Direction of Rotation NEAA24/230…(S)Changing Direction of Rotation NEAA24/230…(S)
Changing Direction of Rotation NEAA24/230…(S)
Factory-set CW!
The irection of rotation can
be change by reversing the
plug J1/Jump.
J1
J1J1
J1
Jump
JumpJump
Jump
1 2 3
2 Point
2 Point2 Point
2 Point 3 Point
3 Point3 Point
3 Point
N
NN
N N
NN
N
AC 24 V
AC 24 V AC 24 V
AC 24 V ±15%
±15%±15%
±15%
DC 24 V
DC 24 V DC 24 V
DC 24 V ±15%
±15%±15%
±15%
AC 230 V
AC 230 V AC 230 V
AC 230 V ±10%
±10%±10%
±10%
L1
L1L1
L1 L1
L1L1
L1
1 2 3
24 25 26
b
bb
b
21 22 23
3 (1.5) A, AC 230 V
3 (1.5) A, AC 230 V3 (1.5) A, AC 230 V
3 (1.5) A, AC 230 V
Actuator at 0º position
Actuator at 0º positionActuator at 0º position
Actuator at 0º position
a
aa
a
max.
max.max.
max.
Slave
Slave Slave
Slave
Master
Master Master
Master
1 2 3 1 2 3
2 Point
2 Point2 Point
2 Point
3 Point
3 Point3 Point
3 Point
N
NN
N L1
L1L1
L1
AC 24 V
AC 24 V AC 24 V
AC 24 V ±15%
±15%±15%
±15%
DC 24 V
DC 24 V DC 24 V
DC 24 V ±15%
±15%±15%
±15%
AC 230 V
AC 230 V AC 230 V
AC 230 V ±10%
±10%±10%
±10%
90º
0º
CW
J1
Jump
Black
Re
90º
0º
CCW
J1
Jump Black
Re
Connect via safety isolating transformer
Connect via safety isolating transformerConnect via safety isolating transformer
Connect via safety isolating transformer
Rotary Damper Actuator
Rotary Damper ActuatorRotary Damper Actuator
Rotary Damper Actuator
Stan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 NmStan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 Nm
2 Point an 3 Point Control
2 Point an 3 Point Control2 Point an 3 Point Control
2 Point an 3 Point Control
The performance specifications are nominal an conform to acceptable in ustry stan ar s. NENUTEC shall not be liable for amages resulting from misapplication or misuse of its pro ucts. www.nenutec.com
1
1 1
1 2
2 2
2 3
3 3
3 24
24 24
24 26
26 26
26
21
21 21
21 22
22 22
22 23
23 23
23 25
25 25
25
Parallel connection of several NEAA…(S) actuators is possible. The power
consumption an istance between master an slave must be observe .
For more etails of installation an commissioning, please observe our mounting
instruction manual M-NEAA08_16_24.E.

D-220A.E-205/CW25-13 4 / 4
Limiting Angle of Rotation NEAA24/230…(S)
Limiting Angle of Rotation NEAA24/230…(S)Limiting Angle of Rotation NEAA24/230…(S)
Limiting Angle of Rotation NEAA24/230…(S)
0º
0º0º
0º
90º
90º 90º
90º
45º
45º 45º45º
5º
5º 5º
5º
15º
15º
15º
15º
30º
30º
30º
30º
60º
60º 60º
60º
75º
75º
75º
75º
Releasing the A apter NEAA24/230…(S)
Releasing the A apter NEAA24/230…(S)Releasing the A apter NEAA24/230…(S)
Releasing the A apter NEAA24/230…(S)
Rotary Damper Actuator
Rotary Damper ActuatorRotary Damper Actuator
Rotary Damper Actuator
Stan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 NmStan ar 8 Nm /16 Nm / 24 Nm
Stan ar 8 Nm /16 Nm / 24 Nm
2 Point an 3 Point Control
2 Point an 3 Point Control2 Point an 3 Point Control
2 Point an 3 Point Control
OEM Customise Version on Request
OEM Customise Version on RequestOEM Customise Version on Request
OEM Customise Version on Request
NENUTEC offers you actuators in customise versions, e.g. with your own bran name, with colour-coor inate applications an with
your particular eman . For further information please contact us or our local representative.
Important Remark
Important RemarkImportant Remark
Important Remark
Consult NENUTEC representatives for specific requirements an material selections for your inten e application.
AC/DC 24 V: Connect via safety isolating transformer.
AC 230 V: To isolate from the main power supply, the system must incorporate a evice which isconnects the phase con uctor (with at least a 3 mm contact gap).
This actuator inclu es electrical an electronic components an may not be ispose as househol garbage. Please consi er the local vali legislation.
The performance specifications are nominal an conform to acceptable in ustry stan ar s. NENUTEC shall not be liable for amages resulting from misapplication or misuse of its pro ucts. www.nenutec.com
Schachenstrasse 80
CH - 8645 Jona/SG - Switzerlan
T: [phone]
F: [phone]
E-Mail: inf[email protected]
Internet: www.nenutec.com
NENUTEC Asia Pacific Pte Lt
7030 Ang Mo Kio Ave 5
#08-55 Northstar@AMK
Singapore 569 880
T: [phone]
F: [phone]
E-Mail: inf[email protected]