NetComm IAC4000 User manual

NetComm Limited
-
2
-
6 Orion Road, Lane Cove, NSW 2066.
Ph: 02 9424 2000, Fax: [phone],
email: [email protected] , web: www.netcomm.com.au
Trademarks and registered trademarks are the property of their respective owners.
Product code: IAC 4000
Introducing the NetComm IAC 4000
Internet Access Controller
The Internet Access Controller IAC 4000 is a product that has been designed to be
deployed in a broadband service network for high speed access to the Internet
specifically for the hospitality market. The IAC 4000 can serve up to 1024
simultaneous users and it is an ideal for medium to large hotspots. The product
immediately recognize new users on the network (and remembers returning
users) and redirects their browser to a proprietary Web page. There is no need for
users to modify their IP settings (IP Plug n Play) to access the Internet.
The product is a freestanding or rack-mounted unit with two Ethernet ports (WAN and LAN), and a serial
port for system management and administration. After the initial setup and network configuration is
established, the product is easily managed by a network administrator through a Web management
interface or the onboard serial port.
The IAC 4000 has the following features:
IP Plug and Play support Home Page Redirection
Support up to 1024 current users
RADIUS Client Support Flexible deployment - wired and wireless access
Proprietary Authentication Server Inbuilt User Database for local user authentication
Email Server(SMTP) Redirection Advertising URL Link for more revenue
Remote Configuration Walled Garden feature
SNMP Support with MIB VPN Pass through support
Allow or block by IP & MAC address SSL Support
Watchdog Feature for 24x7 operation EAP-MD5 (WEP) or EAP-TLS Security
HTTP Proxy Support V-LAN to stop data sharing
Property Management Console
The IAC100+allows you to use your existing Property Management System* (PMS) to manage the provision
and billing of the internet service for your customers. * Support for Micros Fidelio and Spectrum MK II PMS.
Built-in AAA/Billing System
The IAC 4000 provides an inbuilt proprietary Authentication/Authorisation/Accounting (AAA) server which
allows the administrator to control a user's for internet access and billing individually without any external
AAA server or billing server.
High Density Hotel Internet Access
Are you looking for a high density, cost effective Internet Access Controller
product that will allow
y
our customers wired & wireless internet access?

NetComm Limited
-
2
-
6 Orion Road, Lane Cove, NSW 2066.
Ph: 02 9424 2000, Fax: [phone],
email: [email protected] , web: www.netcomm.com.au
Trademarks and registered trademarks are the property of their respective owners.
Product code: IAC 4000
Hardware Specifications
Network 802.3 10BaseT Ethernet ; 802.3u 100BaseTX Fast Ethernet;
802.11b+ (22MB) Wireless LAN; 802.3 NWay auto-negotiation;
Interface 4 LAN ports (10BaseT / 100BaseTX); 1 WAN port (10BaseT / 100BaseTX), DB9
Serial Port, PMS DB9 Serial Port, One reset button
LED Indicators Power; Alarm, Full Duplex, WAN Link; LAN Activity; Status
Power 100-240 VAC, 50/60 Hz, consumption 10W
Dimensions 1U Rack –Mounte-size . 440(w) x 116(l) x 44 (h) mm
Weight 1.7kg
Environment Operating (10 – 50 deg C) ; Storage (20 – 70 deg C)
Mounting Rack mount
Software Specifications
Configuration IP Plug and Play , support up to 1024 users
AAA
(Authentication/Authorisation/
Accounting)
RADIUS (Remote Authentication Dial-in User Service) Client Authentication and
Accounting (RFC 2865 & RFC 2866); Authentication port 1645 & 1812
Support for a second RADIUS Server for added redundancy. Built-in
Authentication/Accounting, Static /Dynamic Accounting
Bandwidth Management Equal Bandwidth / Class of Service
Networking functions NAT (RFC 1631) ; SMTP Server redirection; DNS redirection;
Static IP / DHCP client / PPPoE / PPTP client, DHCP Server and Relay;
Transparent HTTP Proxy Server; IP Multicast Support, NTP Server Support,
Billing Flexible billing plan, time-based billing (by min/hour/day/week etc), Subscriber
selective service, Port Location Mapping
Security functions SSL User Login page and Configuration, VPN (IPSec / PPTP) Pass Through, Port
Based VLAN , Layer 2 isolation, Authorised Remote Management
Management functions Web based management, HTTP/TFTP Firmware upgrade, scheduled firmware
upgrade, real-time status list, LAN Device management, Syslog, SNMP v1/v2
(MIB II with traps), Backup / Restore Configuration
PMS Billing System Support Micros Fidelio PMS, PMS transaction logs, Support 802.1Q Tag-based
VLAN infrastructure
Marketing functions Customized Subscriber Login Page with logo
Advertisement pop-up feature
Portal Page upon successful login
Walled Garden (free URL link access)
Passthrough IP/MAC/URL