NETGEAR Orbi RBR350 User manual

User Manual
Orbi WiFi 6 Dual-band Mesh System
Orbi Router Model RBR350
Orbi Satellite Model RBS350
NETGEAR, Inc.
350 E. Plumeria DriveDecember 2021
San Jose, CA 95134, USA202-12112-02

Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
2
Orbi WiFi 6 Dual-band Mesh System

Contents
Chapter 1 Overview
Orbi router overview............................................................................8
Orbi router hardware features........................................................8
Orbi router front LED behavior......................................................9
Orbi router Power LED behavior....................................................9
Orbi satellite overview.......................................................................10
Orbi satellite hardware features...................................................10
Orbi satellite front LED behavior.................................................11
Orbi satellite Power LED behavior...............................................11
Connect your Orbi router..................................................................12
Place your Orbi satellite.....................................................................13
Sync your Orbi satellite with your Orbi router................................13
Chapter 2 Connect to the Network and Access the Router
Connect to the network.....................................................................15
Wired connection..........................................................................15
WiFi connection.............................................................................15
WiFi connection using WPS..........................................................16
Types of logins....................................................................................16
Router and satellite labels.................................................................16
Set up and manage with the NETGEAR Orbi app..........................17
Use a web browser to access the router..........................................18
Use the automatic Internet setup option....................................18
Log in to the Orbi router web interface......................................20
Change the language........................................................................20
Chapter 3 Specify Your Internet Settings
Use the Setup Wizard.........................................................................22
Manually set up the Internet connection.........................................22
Specify an Internet connection without a login..........................22
Specify an Internet connection that uses a login.......................24
Requirements for entering IPv6 addresses.....................................25
Specify IPv6 Internet connections................................................26
Use auto detection for an IPv6 Internet connection..................27
Use auto configuration for an IPv6 Internet connection...........28
Set up an IPv6 6to4 tunnel Internet connection.........................30
3

Set up an IPv6 6rd tunnel Internet connection...........................31
Set up an IPv6 pass-through Internet connection......................33
Set up an IPv6 fixed Internet connection....................................34
Set up an IPv6 DHCP Internet connection..................................35
Set up an IPv6 PPPoE Internet connection..................................37
Change the MTU size.........................................................................39
Chapter 4 Control Access to the Internet
Activate and manage NETGEAR Armor using the Orbi app........42
Allow or block access to your network............................................42
Use keywords to block Internet sites...............................................43
Delete keywords that are used to block Internet sites...................44
Avoid blocking on a trusted computer............................................45
Block services from the Internet.......................................................46
Manage network access control lists...............................................47
Schedule when to block Internet sites and services......................48
Set up security event email notifications.........................................49
Chapter 5 Specify Network Settings
View or change WAN settings..........................................................52
Manage Dynamic DNS.......................................................................53
Set up a new Dynamic DNS account...........................................53
Specify a DNS account that you already created.......................54
Change the Dynamic DNS settings.............................................55
Set up a default DMZ server..............................................................56
Change the router’s device name....................................................57
Change the LAN TCP/IP settings......................................................57
Use the router as a DHCP server......................................................59
Disable the DHCP server feature in the router...............................60
Manage reserved LAN IP addresses................................................61
Reserve an IP address....................................................................61
Edit a reserved IP address............................................................62
Delete a reserved IP address entry..............................................62
Manage custom static routes............................................................63
Set up a static route.......................................................................63
Edit a static route...........................................................................64
Delete a static route.......................................................................65
Specify basic WiFi settings................................................................66
Change the WiFi password or security level...................................67
Set up a guest WiFi network.............................................................68
Change your region...........................................................................69
Use the router as a WiFi access point..............................................69
Set up router mode............................................................................71
Generate a new backhaul password................................................71
4
Orbi WiFi 6 Dual-band Mesh System

Set up a bridge for a port group or VLAN tag group....................72
Set up a bridge for a port group..................................................72
Set up a bridge for a VLAN tag group........................................73
Improve network connections with Universal Plug and Play........74
Chapter 6 Manage Your Network
Update the router and satellite firmware........................................78
Check for firmware updates.........................................................78
Manually update firmware............................................................79
Manually update satellite firmware..............................................79
Manually update router firmware................................................80
Change the admin password............................................................81
Enable admin password reset...........................................................81
Reset the admin password................................................................82
View router status and usage information.......................................83
Display Internet port statistics...........................................................83
Check the Internet connection status..............................................84
View the satellite status......................................................................85
View and manage logs of router activity.........................................86
View devices connected to the network or edit device
information..........................................................................................87
View devices connected to the network.....................................87
Edit device information on the Attached Devices page...........88
View satellites connected to the network or edit satellite
information..........................................................................................88
View satellites connected to the network...................................88
Edit satellite information that displays on the Attached Devices
page.................................................................................................89
Monitor Internet traffic.......................................................................90
Set your time zone, adjust for daylight saving time, or change the
NTP server...........................................................................................91
Manage the router configuration file...............................................92
Back up settings.............................................................................92
Erase the current configuration settings.....................................93
Restore configuration settings.....................................................94
Access your Orbi network from anywhere using the Orbi app....94
Chapter 7 Customize Internet Traffic Rules for Ports
Manage port forwarding to a local server.......................................96
Set up port forwarding to a local server......................................96
Add a custom port forwarding service........................................97
Edit a port forwarding service......................................................98
Delete a port forwarding entry.....................................................99
Application example: Make a local web server public.............99
5
Orbi WiFi 6 Dual-band Mesh System

How the router implements the port forwarding rule.............100
Manage port triggering...................................................................100
Add a port triggering service.....................................................101
Disable port triggering or change the time-out period.........102
Application example: Port triggering for Internet Relay Chat.102
Chapter 8 Use VPN to Access Your Network
Set up a VPN connection.................................................................105
Specify VPN service in the router...................................................105
Install OpenVPN software...............................................................106
Install OpenVPN software on your Windows-based computer.106
Install OpenVPN software on your Mac computer..................109
Install OpenVPN software on an iOS device............................110
Install OpenVPN software on an Android device....................110
Use a VPN tunnel on your Windows-based computer................111
Use VPN to access your Internet service at home........................113
Set up VPN client Internet access in the router........................113
Block VPN client Internet access in the router..............................114
Use a VPN tunnel to access your Internet service at home.........114
Chapter 9 Troubleshooting
Quick tips...........................................................................................117
Sequence to restart your network.............................................117
WiFi settings.................................................................................117
Network settings..........................................................................117
The router and satellite do not sync..............................................117
You cannot log in to the router.......................................................118
You cannot access the Internet.......................................................119
Troubleshoot Internet browsing.....................................................120
Troubleshoot PPPoE........................................................................121
Troubleshoot WiFi connectivity......................................................121
Troubleshoot your network using the ping utility........................122
Test the LAN path to your router...............................................122
Test the path from your computer to a remote device...........123
Appendix A Factory Settings and Technical Specifications
Factory settings.................................................................................126
Factory settings for Orbi router model RBR350......................126
Factory settings for Orbi satellite model RBS350....................128
Technical specifications...................................................................130
Technical specifications for Orbi router model RBR350.........130
Technical specifications for Orbi satellite model RBS350......131
6
Orbi WiFi 6 Dual-band Mesh System

1
Overview
The Orbi WiFi 6 Dual-band Mesh System creates dedicated high-speed WiFi connections
to your Internet service. The Orbi router (model RBR350) connects to your modem or
gateway. The Orbi satellite (model RBS350) extends the WiFi signal throughout your
home.
This manual describes how to manage your Orbi WiFi 6 Dual-band Mesh System from
your Orbi router web interface. You can manage your Orbi satellite from the Orbi router
web interface.
This chapter contains the following sections:
• Orbi router overview
• Orbi satellite overview
• Connect your Orbi router
• Place your Orbi satellite
• Sync your Orbi satellite with your Orbi router
For more information about the topics covered in this manual, visit the support website
at https://www.netgear.com/support/.
Note: This manual might refer to the Orbi router (model RBR350) as the router and
refer to the Orbi satellite (model RBS350) as the satellite.
7

Orbi router overview
The following sections are an overview of the Orbi router hardware features and LED
behavior.
Orbi router hardware features
The following figures shows the Orbi router hardware features.
Figure 1. Orbi router front and back views
1. Router LED. The router LED on the front of the router lights to show the router status.
For more information, see Orbi router front LED behavior on page 9.
2. Sync button. Use the Sync button to sync your router to your satellite if they don't
sync automatically.
3. Internet port. Connect your Internet modem, such as a cable modem or DSL modem,
to the router's Internet port.
4. Ethernet ports. You can use these ports to connect Ethernet devices, such as a
computer or gaming console, to your router.
5. DC Power connector. Connect the power adapter that came in your product package
to the DC power connector.
User Manual8Overview
Orbi WiFi 6 Dual-band Mesh System

6. Power LED. The Power LED lights when power is supplied to the router. For more
information, see Orbi router Power LED behavior on page 9.
7. Reset button. Pressing the Reset button resets the router. If the Reset button is
pressed for at least 10 seconds and the Power LED blinks, the router returns to its
factory settings.
Orbi router front LED behavior
The router LED is located on the front of the Orbi router. Use this LED to determine the
router status.
The following table describes the router LED behavior.
Table 1. Router LED behavior
DescriptionLED color
The router is booting or someone pressed the Sync button.Pulsing white
The router is resetting to its factory default settings.Solid white
The router cannot connect to the Internet.Solid magenta
The router finished booting and is working normally.Off
Orbi router Power LED behavior
A Power LED is located on the back of the Orbi router.
The following table describes the router’s Power LED behavior.
Table 2. Router Power LED behavior
DescriptionLED color
Power is on.Solid green
The router is resetting to its factory default settings.Blinking amber
The router’s firmware is corrupted.Blinking red
Power is not supplied to the router.Off
User Manual9Overview
Orbi WiFi 6 Dual-band Mesh System

Orbi satellite overview
The following sections are an overview of the Orbi satellite hardware features and LED
behavior.
Orbi satellite hardware features
The following figures shows the Orbi satellite hardware features.
Figure 2. Orbi satellite front and back views
1. Satellite LED. The satellite LED lights to show the satellite status. For more
information, see Orbi satellite front LED behavior on page 11.
2. Sync button. Use the Sync button to sync your satellite to your router if they don't
sync automatically.
3. Ethernet ports. You can use these ports to connect Ethernet devices, such as a
computer or gaming console, to your satellite.
4. DC Power connector. Connect the power adapter that came in your product package
to the DC power connector.
5. Power LED. The Power LED lights when power is supplied to the satellite. For more
information, see Orbi satellite Power LED behavior on page 11.
6. Reset button. Pressing the Reset button resets the satellite. If the Reset button is
pressed for at least 10 seconds and the Power LED blinks, the satellite returns to its
factory settings.
User Manual10Overview
Orbi WiFi 6 Dual-band Mesh System

Orbi satellite front LED behavior
The satellite LED is located on the front of the Orbi satellite. Use this LED to determine
the satellite status.
The following table describes the satellite LED behavior.
Table 3. Satellite LED behavior
DescriptionLED color
The satellite is booting.Pulsing white
The connection between the satellite and router is good.
The LED lights blue for three minutes and then turns off.
Blue
The connection between the satellite and router is fair.
The LED lights amber for three minutes and then turns off.
Amber
The satellite failed to sync with the router.Magenta
The satellite synced with the router and is working normally.Off
Orbi satellite Power LED behavior
A Power LED is located on the back of the Orbi satellite.
The following table describes the satellite’s Power LED behavior.
Table 4. Satellite Power LED behavior
DescriptionLED color
Power is on.Solid green
The satellite’s firmware is resetting to its factory default settings.Blinking amber
The satellite’s firmware is corrupted.Blinking red
Power is not supplied to the satellite.Off
User Manual11Overview
Orbi WiFi 6 Dual-band Mesh System

Connect your Orbi router
Power on your router and connect it to a modem.
Figure 3. Connect the router
To cable your router:
1. Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3. Connect your modem to the Internet port on your router with the Ethernet cable
that came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. If the Power LED does not light, make sure that the power adapter is properly
connected to your router and power outlet.
User Manual12Overview
Orbi WiFi 6 Dual-band Mesh System

Place your Orbi satellite
Your Orbi satellite must be within range of your Orbi router’s WiFi signal for it to sync
with your router. Use the satellite LED on the front of the satellite to help you determine
where to place your satellite.
Sync your Orbi satellite with your Orbi router
The Orbi satellite that comes with your Orbi router is preset to automatically find and
sync to your Orbi router’s WiFi signal.
To sync your satellite:
1. Place your satellite.
For more information, see Place your Orbi satellite on page 13.
2. Connect the satellite to a power source.
The satellite LED pulses white. The satellite automatically finds the Orbi router’s WiFi
signal and attempts to sync to the Orbi router.
The satellite LED lights one of the following colors:
•Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
•Amber. The connection with the router is fair. We recommend that you move
the Orbi satellite closer to the Orbi router and try again.
3. If the satellite LED lights magenta, do the following:
a. Unplug your Orbi satellite, move the satellite closer to the router.
b. Plug the satellite back in and wait two minutes for the LED to turn blue or amber.
4. If the satellite LED still does not turn blue or amber, do the following:
a. Press the Sync button on the back of the router.
b. Within two minutes, press the Sync button on the back of the satellite.
c. Wait two minutes for the LED to turn blue or amber.
User Manual13Overview
Orbi WiFi 6 Dual-band Mesh System

2
Connect to the Network and Access
the Router
This chapter contains the following sections:
• Connect to the network
• Types of logins
• Router and satellite labels
• Set up and manage with the NETGEAR Orbi app
• Use a web browser to access the router
• Change the language
14

Connect to the network
You can connect to the Orbi network through a wired or WiFi connection. If you set up
your computer to use a static IP address, change the settings so that it uses Dynamic
Host Configuration Protocol (DHCP).
Wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN). The computer must have an Ethernet port.
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to one of the router’s Ethernet ports.
Your computer connects to the local area network (LAN). A message might display
on your computer screen to notify you that an Ethernet cable is connected.
WiFi connection
If you're installing your Orbi router for the first time, you can connect to the router's
WiFi network by scanning the QR code on your router with the camera app on your
mobile device. To scan the QR code with your camera app, your mobile device must
have iOS version 11 or later or Android version 10 or later.
You can also manually find and select the Orbi router's WiFi network from your
WiFi-enabled computer or mobile device.
To find and select the WiFi network:
1. Make sure that the router or satellite is receiving power (its Power LED is lit).
2. On your WiFi-enabled computer or mobile device, find and select the WiFi network.
The WiFi network name is on the router label. The WiFi network name is the same
for the router and the satellite in the Orbi WiFi System.
Note: If you bought the router and the satellite separately, their default WiFi network
names are different.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your WiFi-enabled computer or mobile device connects to the WiFi network.
User Manual15Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System

WiFi connection using WPS
You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you
can find and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Check the WPS instructions for your computer or WiFi device.
3. Press the Sync button on the router.
4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS
button or follow its instructions for WPS connections.
Your computer or mobile device connects to the WiFi network.
Types of logins
Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
•ISP login. The login that your Internet service provider (ISP) gave you logs you in to
your Internet service. Your service provider gave you this login information in a letter
or some other way. If you cannot find this login information, contact your service
provider.
•WiFi network name and network key. Your router and satellite are preset with the
same WiFi network name (SSID) and network key (password) for WiFi access. This
information is on the router label and the satellite label.
•NETGEAR account login. The free NETGEAR account that you need to register your
router and manage your subscriptions. If you do not own a NETGEAR account, you
can create one using the NETGEAR Orbi app.
•Router login. This logs you in to the router interface from a web browser as admin.
Router and satellite labels
The Orbi router and satellite labels show the router's or satellite's MAC address and
serial number. The labels also include QR codes you can scan during setup to connect
User Manual16Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System

to the Orbi setup network. Following are examples of what the router and satellite labels
might look like:
Figure 4. Router label (left) and satellite label (right)
Set up and manage with the NETGEAR Orbi
app
You can use the NETGEAR Orbi app to set up and access your Orbi network.
To find the app, scan a QR code or search for NETGEAR Orbi in the Apple App Store
or Google Play Store.
For more information about the Orbi app, visit
https://www.netgear.com/home/apps-services/orbi-app.
Note: If you do not want to use the NETGEAR Orbi app, you can use the Orbi router
web interface to set up your Orbi devices. For more information about how to access
your Orbi router web interface, see Use a web browser to access the router on page
18.
User Manual17Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System

To set up your Orbi WiFi system with the Orbi app:
1. Download the NETGEAR Orbi app on your mobile device.
2. On your mobile device, open the WiFi connection manager.
3. Locate and connect your mobile device to your Orbi WiFi network.
Your preset Orbi WiFi network and password displays on the Orbi router label. You
can change the WiFi credentials after the setup.
4. Launch the Orbi app and follow the setup instructions.
Use a web browser to access the router
When you connect to the network (either with WiFi or with an Ethernet cable), you can
use a web browser to access the router to view or change its settings. The first time you
access the router, the NETGEAR installation assistant automatically checks to see if your
router can connect to your Internet service.
Use the automatic Internet setup option
You can set up your router automatically, or you can use a web browser to access the
router and set up your router manually. Before you start the setup process, get your ISP
information and make sure that the computers and devices in the network use the
settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
•The ISP configuration information for your DSL account
•ISP login name and password
•Fixed or static IP address settings (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
Installation and basic setup takes about 15 minutes to complete.
User Manual18Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System

To automatically set up your router:
1. Power on your router.
2. Make sure that your WiFi-enabled computer or mobile device is connected to the
router with an Ethernet cable (wired) or wirelessly with the preset WiFi security
settings listed on the label.
Note: If you want to change the router’s WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
•The first time that you set up the Internet connection for your router, the browser
goes to orbilogin.com, and the Orbi login page displays.
•If you already set up the Internet connection, enter orbilogin.com in the address
field for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the web page, do the following:
•Make sure that the computer is connected to one of the four LAN Ethernet ports
or over WiFi to the router.
•Make sure that the router is receiving power, and that its Power LED is lit.
•Close and reopen the browser or clear the browser cache.
•Browse to orbilogin.com.
•If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings.
b. Make sure that you selected the correct options and typed everything correctly.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read Troubleshooting on page 116.
If problems persist, register your NETGEAR product and contact NETGEAR
technical support.
User Manual19Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System

Log in to the Orbi router web interface
When you log in to the Orbi, the browser displays the router web interface. You can
use the router web interface to change the router or satellite settings.
To log in to your Orbi:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Change the language
By default, the language is set as Auto.
To change the language:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. In the upper right corner, select a language from the menu.
5. When prompted, click the OK button to confirm this change.
The page refreshes with the language that you selected.
User Manual20Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System