NETGEAR VueZone User manual

Adding a VueZone
Camera
Visit VueZone.com
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
We’re here to help!
Go to http://support.netgear.com for
product updates and web support.
You can also access support by clicking
the Help link when logged into your
account at my.VueZone.com
?
What’s in the box
Mounting screw
VueZone Camera Camera mount Battery
Install camera batteries
1
Go to http://support.netgear.com for support help.
Slide latch to remove
battery door.
Insert batteries as indicated
with negative terminal first.
Replace battery door and latch.
©2013 NETGEAR, Inc. All rights
reserved. NETGEAR, VueZone and the
NETGEAR VueZone logo are trademarks
or registered trademarks of NETGEAR,
Inc. and/or its subsidiaries in the United
States and/or other countries.
Night Vision Lamp
included only with
Night Vision Camera

Start viewing!
Synced cameras will appear on the Cameras
tab on your account at my.VueZone.com.
Click on the camera or on the toolbar to
start viewing.
4
Install cameras
3
Peel.
Remove strip from adhesive
backing on mount. Do not
remove if mounting on a screw.
Stick.
Press mount firmly on a flat
surface or hang from a screw.
Position.
Place the camera on the
magnetic mount and aim.
Mounts for windows and tabletops/ceilings
are also available at VueZone.com
Sync cameras
2
Click the Sync button
on top of base station.
Blue Sync light will
turn on.
Hold camera within 12 inches of the
base station and slide power switch
ON (green dot showing).
Blue light on camera front
will blink for 5 seconds
to confirm sync.
NOTE: each time power is turned ON, motion detection
cameras require 1 minute for sensor to warm up and operate.
▼
Aim cameras from your smartphone with VueZone Mobile.
For complete details, go to VueZone.com/mobileapps
Warning: Choking hazard with small parts.
Keep out of reach of small children.
Declaration of Conformity
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/