NETGEAR ReadyNAS Duo User manual

ReadyNAS OS 6.2
Rack-Mount Storage Systems
Installation Guide

2
Contents
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Reformat Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3
Package Contents
IMPORTANT: Read all safety warnings in the hardware manual for
your system before connecting the system to the power supply.
ReadyNAS system (your model may vary)
(varies by model)
Power cord Ethernet cable

4
Basic Setup
After you follow these instructions, your ReadyNAS is ready to use in
a production environment. Setup takes approximately 15 minutes.
To set up your storage system:
1. Install all available disks that you want to use in your ReadyNAS
system.
Note: If you are using previously formatted disks that contain
data, you must reformat these disks before continuing. See
Reformat Disks on page 7.
For a list of supported disks, see the Hardware Compatibility List
at http://www.netgear.com/readynas-hcl.
For information about installing disks, see the hardware manual
for your system.
2. Place your system in a location that provides adequate
ventilation.
High-capacity disks can produce considerable heat. It is
important to ensure that the fan exhausts are unobstructed.
For a complete list of placement considerations, see the
hardware manual for your system.
3. Connect the power cord to the back of the system and plug the
other end into a wall outlet or power strip.
4. If your ReadyNAS system includes a power switch on the back
panel, make sure that it is in the On position.
5. Use an Ethernet cable to connect an Ethernet port on the
storage system to your network.
6. If necessary, press the Power button to turn on the system.
7. Wait for the Power LED to turn solid blue.

5
8. Visit http://readycloud.netgear.com on a computer that uses the
same local area network (LAN) and Internet connection as your
ReadyNAS system.
Note: If your computer cannot access the Internet, install and
run the RAIDar utility instead. Download RAIDar to a computer
connected to the Internet and transfer the downloaded file to the
computer on the same LAN as your ReadyNAS system. You can
find the latest version of RAIDar at 
http://www.netgear.com/raidar.
9. Click the Discover button.
ReadyCLOUD automatically detects your ReadyNAS system on
the network.
Your new ReadyNAS system is marked with a NEW label.
10. Click the Setup button.

6
11. Select the mode that you want to use to set up your system:
•Option 1. Select Join Now and do the following:
aSign in to ReadyCLOUD or create a user account.
bFollow the prompts to configure your ReadyNAS system.
•Option 2. Select Join Later and do the following:
aEnter admin for the user name, enter password for the
password, and click the OK button.
Note: You can change these credentials when you configure
your system. NETGEAR recommends that you change your
password as soon as possible.
The ReadyNAS local admin page displays in your
browser and launches a setup wizard.
bFollow the prompts of the setup wizard to configure your
ReadyNAS system.
The setup process is complete. You can begin using your ReadyNAS
storage system.

7
Reformat Disks
If you are using previously formatted disks that contain data, you
must reformat the disks before you can use them with your
ReadyNAS system.
Warning: This process erases all data and reformats all disks into a
single X-RAID volume. If you want to preserve the data on the disks,
you must back up the data to an external drive before using the disks
in your ReadyNAS storage system.
You can reformat your disks using the factory default option or using
the RAIDar utility. To use the factory default option, follow the
directions in the rackmount hardware reference manual, which you
can download at
http://support.netgear.com/product/ReadyNAS-OS6.
To reformat previously formatted disks using RAIDar:
1. On a computer that is connected to the same LAN as your
ReadyNAS system, download and install the latest version of
RAIDar.
You can find the latest version of RAIDar at 
http://www.netgear.com/raidar.
2. Launch RAIDar and select your system from the list of detected
devices.

8
3. Click the Format button.
The system reformats all installed disks for use with ReadyNAS OS
6.2. When the reformattingprocess is complete, thereformatted disks
are ready to use with your system.

9
Additional Information
To help keep your storage system healthy and prevent the risk of
data loss, follow these rules of usage:
•Never replace more than one disk at a time while the system is
powered on.
•If you must power off your system, power it off gracefully, when
possible.
To gracefully power off your storage system:
1. Press the Power button on the front panel of the system.
The Power LED blinks, prompting you to confirm the shutdown.
2. Press the Power button again.
The system shuts down gracefully.
For more information about setting up, configuring, and using your
system, see the software and hardware manuals for your system.
Links to these manuals are available at 
http://support.netgear.com/product/ReadyNAS-OS6 or through a link
in the product’s user interface.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
November 2014
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label of
your product and use it to register your product at 
https://my.netgear.com. You must register your product before you
can use NETGEAR telephone support. NETGEAR recommends
registering your product through the NETGEAR website.
For product updates, additional documentation, and support, visit 
http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR
support resources.
You can get the user manual online at 
http://downloadcenter.netgear.com or through a link in the product’s
user interface.
Trademarks
©NETGEAR, Inc. NETGEAR, the NETGEAR Logo, ReadySHARE,
and AirCard, are trademarks of NETGEAR, Inc.
Compliance
For regulatory compliance information, visit http://www.netgear.com/
about/regulatory/.
See the regulatory compliance document before connecting the
power supply.