NETGEAR GS750E User manual

User Manual
48-Port Gigabit Ethernet Plus Switch
with 2 SFP Ports
Model GS750E
NETGEAR, Inc.
350 E. Plumeria DriveNovember 2021
San Jose, CA 95134, USA202-11784-04

Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
Revision History
CommentsPublish DatePublication Part
Number
Removed information about the ProSAFE Plus Utility, which has reached
end-of-life.
Removed information about the NETGEAR Insight app.
November 2021202-11784-04
Added Change the language of the device UI on page 12.
Changed Add devices to the Access Control table on page 39.
March 2019202-11784-03
2
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

(Continued)
CommentsPublish DatePublication Part
Number
Added with 2 SFP Ports to the switch name.
Revised Configure the switch on page 7.
Revised Access a switch that is connected to a network on page 8.
Added Use the NETGEAR Switch Discovery Tool to access the switch on page
9.
Added Access the switch from a Mac using Bonjour on page 11.
Removed references to the resource CD.
Made multiple minor changes.
October 2018202-11784-02
First publication.July 2017202-11784-01
3
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

Contents
Chapter 1 Get Started
Related documentation.......................................................................7
Configure the switch............................................................................7
Access the switch using a web browser.............................................7
Access a switch that is connected to a network...........................8
Access a switch that is off-network.................................................9
Use the NETGEAR Switch Discovery Tool to access the switch......9
Access the switch from a Mac using Bonjour..................................11
Change the switch password............................................................11
Change the language of the device UI............................................12
Register your product........................................................................13
Chapter 2 Use VLANS for Traffic Segmentation
VLAN overview....................................................................................16
Create basic port-based VLANs.......................................................16
Assign ports to multiple port-based VLANs....................................18
Create 802.1Q-based VLANs in a basic configuration..................19
Create 802.1Q-based VLANs in an advanced configuration........21
Add tagged or untagged ports to an 802.1Q-based VLAN.........23
Specify a port PVID for an 802.1Q-based VLAN.............................24
Manage the voice VLAN....................................................................26
Specify the voice VLAN properties..............................................26
Enable the voice VLAN mode for ports.......................................27
Manage the OUI table...................................................................28
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-based quality of service...............................32
Configure port-based quality of service..........................................33
Set up rate limiting.............................................................................34
Set up broadcast filtering..................................................................35
Chapter 4 Manage Security
Manage access control......................................................................39
Add devices to the Access Control table....................................39
Remove devices from the Access Control table........................40
Set the switch management mode...................................................41
4

Disable Bonjour for discovery...........................................................42
Manage automatic denial of service................................................43
Chapter 5 Manage Network Settings
Specify IP address settings for the switch........................................46
Use browser-based access to specify the switch IP address.........46
Manage multicast traffic with IGMP snooping................................47
Customize IGMP snooping...........................................................48
Specify a VLAN for IGMP snooping.............................................49
Enable the Auto-Video configuration..........................................50
Set up link aggregation.....................................................................51
Set up a static link aggregation group........................................52
Set up a Link Aggregation Control Protocol group..................53
Set up the LACP system priority for the switch..........................55
Set Up LACP port priority and time-out values..........................55
Chapter 6 Manage and Monitor the Switch
Manage flow control..........................................................................59
Manage the port speed and the port status...................................60
Enable loop prevention.....................................................................61
Manage power saving options.........................................................62
Manually download and upgrade the firmware.............................63
Reboot the switch...............................................................................64
Save the switch configuration...........................................................65
Restore a saved switch configuration..............................................66
Restore factory default settings........................................................66
Enable port mirroring........................................................................67
View switch information or change the switch device name........69
View or clear the port statistics.........................................................70
Chapter 7 Diagnostics and Troubleshooting
Test cable connections......................................................................73
Resolve a subnet conflict to access the switch................................74
Appendix A Factory Default Settings
5
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

1
Get Started
This user manual is for the NETGEAR 48-Port Gigabit Ethernet Plus Switch with 2 SFP
Ports, model GS750E.
This chapter covers the following topics:
• Related documentation
• Configure the switch
• Access the switch using a web browser
• Use the NETGEAR Switch Discovery Tool to access the switch
• Access the switch from a Mac using Bonjour
• Change the switch password
• Change the language of the device UI
• Register your product
Note: For more information about the topics covered in this manual, visit the support
website at netgear.com/support.
Note: Firmware updates with new features and bug fixes are made available from time
to time at netgear.com/support/download/. You can check for and download new
firmware manually. If the features or behavior of your product does not match what is
described in this guide, see the latest firmware release notes for your switch model.
6

Related documentation
The following related documentation is available at netgear.com/support/download/:
•Installation guide
•Hardware installation guide
•Data sheet
Configure the switch
Plus Gigabit Ethernet Switches are plug-and-play, so they can be used without any
configuration. Just connect power, connect to your network and to your other devices,
and you’re done.
For easiest access, we recommend that you cable the switch to a network with a router
or DHCP server that assigns IP addresses and power on the switch. However, it is also
possible to configure the switch connected directly only to the computer that you are
using to configure it, and not connected to the network (off-network).
You can configure and manage advanced features of the switch by using your computer’s
web browser and accessing the switch at its IP address.
If you use a Mac or a 64-bit Windows-based computer, you can use the NETGEAR Switch
Discovery Tool to discover the switch in your network and access the local browser–based
management interface of the switch.
If your Mac supports Bonjour, you can use Bonjour to discover the switch in your network
and access the local browser interface of the switch.
For more information, see the following sections:
•Access the switch using a web browser on page 7
•Use the NETGEAR Switch Discovery Tool to access the switch on page 9
•Access the switch from a Mac using Bonjour on page 11
Access the switch using a web browser
This manual describes how to use the local browser–based management interface,
referred to as the device UI.
You can access and configure the switch directly through its device UI by entering the
IP address of the switch in the address bar of a browser. When you access the device
UI to configure the switch, it's simpler if the switch is not connected to your network
User Manual7Get Started
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

(off-network). You can also configure the switch with it connected to your network,
router, or modem, (on-network) but you must be able to determine the IP address of
the switch if your network uses DHCP.
Access a switch that is connected to a network
By default, the DHCP client of the switch is enabled. To access the switch, use the IP
address that the DHCP server assigned to the switch.
To determine the IP address of the switch, do one of the following:
•If you use a Mac or a 64-bit Windows-based computer, use the NETGEAR Switch
Discovery Tool to detect the IP address (see Use the NETGEAR Switch Discovery
Tool to access the switch on page 9).
•If you use a Mac that supports Bonjour, use Bonjour to detect the IP address (see
Access the switch from a Mac using Bonjour on page 11).
•Access the DHCP server.
•Use an IP scanner utility.
To use your web browser to configure a switch that is connected to a network:
1. Cable the switch to a network with a router or DHCP server that manages IP
addresses.
2. Power on the switch.
The DHCP server assigns the switch an IP address.
3. Connect your computer to the same network as the switch.
4. Determine the IP address of the switch.
By default, the DHCP client of the switch is enabled. Use the IP address that the
DHCP server assigned to the switch.
5. Open a web browser, and enter the IP address of the switch.
The login page displays.
6. Enter the device admin password.
Use the default password printed on the device label the first time you log in, and
then you must set a new device password. The password is case-sensitive.
7. Click the Login button.
You can now configure additional options for the switch through the device UI.
For information about setting up a fixed (static) IP address for the switch, see Specify
IP address settings for the switch on page 46.
User Manual8Get Started
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

Access a switch that is off-network
To use your web browser to configure a switch that is not connected to a network:
1. Record your computer’s TCP/IP configuration settings, and then configure the
computer with a static IP address of 192.168.0.210 and 255.255.255.0 as the subnet
mask.
Note: If you are unsure how to do this, visit the support website at
netgear.com/support and search for Static IP address on computer.
2. Plug the switch into a power outlet and then connect your computer to the switch
using an Ethernet cable.
You can connect the Ethernet cable to any port on the switch.
3. Open a web browser, and enter http://192.168.0.239.
This is the default address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
5. Click the Login button.
You can now configure additional options for the switch through the device UI.
For information about setting up a fixed (static) IP address for the switch, see Specify
IP address settings for the switch on page 46.
6. After you complete the configuration of the switch, reconfigure the computer that
you used for this process to its original TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Use the NETGEAR Switch Discovery Tool to
access the switch
For easiest access, we recommend that you cable the switch to a network with a router
or DHCP server that assigns IP addresses, power on the switch, and then use a computer
that is connected to the same network as the switch.
Depending on your model switch, the NETGEAR Switch Discovery Tool lets you discover
the switch in your network and access the device UI of the switch from a Mac or a
Windows-based computer.
User Manual9Get Started
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E

To install the NETGEAR Switch Discovery Tool, discover the switch in your network,
and access the device UI of the switch:
1. Download the Switch Discovery Tool by visiting
netgear.com/support/product/netgear-switch-discovery-tool.aspx.
Depending on the computer that you are using, download either the Mac version
or the version for a 64-bit Windows-based computer.
2. Temporarily disable the firewall, Internet security, antivirus programs, or all of these
on the computer that you use to configure the switch.
3. Unzip the Switch Discovery Tool files, double-click the .exe or .dmg file (for example,
NETGEAR+Switch+Discovery+Tool+Setup+1.2.101.exe or
NetgearSDT-V1.2.101.dmg), and install the program on your computer.
The installation process places a NETGEAR Switch Discovery Tool icon on your
desktop.
4. Reenable the security services on your computer.
5. Power on the switch.
The DHCP server assigns the switch an IP address.
6. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection. The computer and the switch must be on
the same Layer 2 network.
7. Open the Switch Discovery Tool.
To open the program, double-click the NETGEAR Switch Discovery Tool icon on
your desktop.
The initial page displays a menu and a button.
8. From the Choose a connection menu, select the network connection that allows
the Switch Discovery Tool to access the switch.
9. Click the Start Searching button.
The Switch Discovery Tool displays a list of NETGEAR switches that it discovers on
the selected network.
For each switch, the tool displays the IP address.
10. To access the device UI of the switch, click the ADMIN PAGE button.
The login page of the device UI opens.
11. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
User Manual10Get Started
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E