NETGEAR ProSAFE FS116Pv2 User manual

ProSAFE® FS116Pv2 16-Port 10/100 Desktop Switch with 8-port PoE
Installation Guide
Step 2. Connect power
Step 3. Check status
Optional
modem
Step 1. Connect equipment
FS116P
Optional router
Computer Server
Internet
On
Off
Power LED
Activity (blinking)
No link (off)
(right LED)
10 Mbps link
Port 9-16 LEDs
(left LED)
100 Mbps link
Less than 7W of
PoE power is available
PoE Max. LED
PoE ports are
working normally (off)
PoE MAX LED was
active in the previous
2 minutes
PoE in use
No PoE use (off)
Activity (blinking)
No link (off)
10 Mbps link
Port 1-8 left LEDs
100 Mbps link
PoE fault
Port 1-8 right LEDs
Optional
Wireless Access Point
PoE Ports (1-8)
FS116Pv2 IG 22sept12.fm Page 1 Wednesday, May 22, 2013 5:27 PM

May 2013
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other
countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T, or 100BASE-TX
Network cable Category 5 (Cat 5) or better Ethernet cable
Ports 16
Power adapter 48V @ 1.66A/1.875A DC input
Power consumption 80W max.
PoE Power budget 70W max. (all PoE ports, Port 1 – Port 8), 15.4W max. per PoE
port
Weight 0.85 kg (1.874 lbs)
Dimensions
(W x D x H)
286 mm x 102 mm x 27 mm
11.26 in. x 4.02 in. x 1.06 in.
Operating
temperature
0° to 40° C (32° to 104° F)
Operating humidity 10% to 90% relative humidity, non-condensing
Electromagnetic
compliance
CE Class A, FCC Class A, VCCI Class A,
Safety agency
approvals
CB, CCC
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
FS116Pv2 IG 22sept12.fm Page 2 Wednesday, May 22, 2013 5:27 PM