NETGEAR WFS709TP - ProSafe Smart Wireless Controller Manual

202-10264-01
May 2007
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
WFS709TP ProSafe
Smart Wireless Switch
Hardware Installation
Guide

ii
v1.0, May 2007
© 2007 by NETGEAR, Inc. All rights reserved.
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: [e-mail]
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other
countries. Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the WFS709TP ProSafe™ Smart Wireless Switch has been suppressed in accordance with the
conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das WFS709TP ProSafe Smart Wireless Switch gemäß der im BMPT-AmtsblVfg 243/
1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B.
Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end user by the applicable National regulatory authority.

v1.0, May 2007
iii
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
United States
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
This product is UL Listed (UL60950).
Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A
prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le ministère des
Communications.
This product complies with CAN/CSA C22.2 No 60950 standards.
Europe
The WFS709TP ProSafe Smart Wireless Switch is compliant with the following EU Council Directives: 89/336/EEC
and LVD 73/23/EEC. Compliance is verified by testing to the following standards: EN55022 Class A, EN55024, and
EN60950.
Japan
This equipment is in the Class A category (information equipment to be used in commercial and/or industrial areas) and
conforms to the standards set by the Voluntary Control Council for Interference by Data Processing Equipment and
Electronic Office Machines that are aimed at preventing radio interference in commercial and/or industrial areas.
Consequently, when this equipment is used in a residential area or in an adjacent area thereto, radio interference may be
caused to equipment such as radios and TV receivers.
Warning: This is a Class A product. In a domestic environment, this product may cause radio interference
in which case the user may be required to take adequate measures

v1.0, May 2007
iv
VCCI - Class A
Korea
Class A
Australia/New Zealand
This product complies with AS/NZS CISPR 22 Class A standards.
Rest of World
This product complies with CISPR 22 Class A standards
.
Lithium Battery Safety Notice
This product contains a lithium battery which is replaceable only by a trained technician.
Caution: The lithium battery may explode if it is incorrectly replaced. A trained technician should replace
the battery with the same or equivalent type battery recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions

v1.0, May 2007
v
European Union RoHS
China RoHS
Netgear products comply with the EU Restriction of Hazardous Substances Directive
2002/95/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the
manufacture of electrical and electronic equipment. Specifically, restricted materials
under the RoHS Directive are Lead (including Solder used in printed circuit
assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine compounds of
PBB and PBDE. Some Netgear products are subject to the exemptions listed in RoHS
Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and
packaging will be marked with the "RoHS" label shown at the left indicating
conformance to this Directive.
Netgear products comply with China environmental declaration requirements and are
labeled with the "EFUP 50" label shown at the left.

v1.0, May 2007
vi
Product and Publication Details
Model Number: WFS709TP
Publication Date: May 2007
Product Family: Wireless
Product Name: WFS709TP ProSafe Smart Wireless Switch
Home or Business Product: Business
Language: English
Publication Part Number: 202-10264-01
Publication Version Number: 1.0

v1.0, May 2007
vii
Contents
About This Manual
Conventions, Formats, and Scope ................................................................................... ix
How to Use This Manual ................................................................................................... x
How to Print this Manual.................................................................................................... x
Revision History................................................................................................................ xi
Chapter 1.
Introduction
WFS709TP ProSafe Smart Wireless Switch Overview ..................................................1-1
Front and Rear View .......................................................................................................1-2
System Indicator LEDs .............................................................................................1-2
Fast Ethernet Ports ..................................................................................................1-3
GE Uplink Port .........................................................................................................1-5
Serial Console Port ..................................................................................................1-5
Fans/Heat Exhaust ...................................................................................................1-6
Rack Mounting Brackets ..........................................................................................1-6
Power Input Socket ..................................................................................................1-6
Task Overview ................................................................................................................1-6
NETGEAR Smart Wireless Components .................................................................1-6
Deployment Summary ..............................................................................................1-7
Chapter 2.
Installing the Chassis
Pre-Installation Checklist ................................................................................................2-1
Precautions .....................................................................................................................2-2
Requirements .................................................................................................................2-3
Mounting the Chassis .....................................................................................................2-4
Connecting Power ..........................................................................................................2-6
Verifying the Installation ..................................................................................................2-7

v1.0, May 2007
viii
Appendix A.
Cables and Connector Pinouts
Fast Ethernet Network Ports ......................................................................................... A-1
RJ-45 Pinouts .......................................................................................................... A-1
Cables ..................................................................................................................... A-1
GE Uplink Port ............................................................................................................... A-2
1000BASE-T (Copper) GE Cable ........................................................................... A-2
Serial Console Port ........................................................................................................ A-3
Port and Adapter Pinouts ........................................................................................ A-3
Console Terminal Settings ...................................................................................... A-4
Appendix B.
Specifications
Physical ......................................................................................................................... B-1
Environmental ................................................................................................................ B-1
Operational ....................................................................................................................B-2
Appendix C.
Related Documents

ix
v1.0, May 2007
About This Manual
The WFS709TP ProSafe™ Smart Wireless Switch Hardware Installation Guide describes how to
install the WFS709TP ProSafe Smart Wireless Switch. The information in this manual is intended
for trained technicians responsible for installing this product.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions:
•Formats. This manual uses the following formats to highlight special messages:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
x
v1.0, May 2007
•Scope. This manual is written for the WFS709TP according to these specifications:
For more information about network, wireless, and firewall technologies, see the links to the
NETGEAR website in Appendix C, “Related Documents”.
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forwards or backwards through the manual one page
at a time
•A button that displays the table of contents and an button. Double-click on a
link in the table of contents or index to navigate directly to where the topic is described in the
manual
•A button to access the full NETGEAR, Inc. online knowledge base for the product
model
• Links to PDF versions of the full manual and individual chapters
How to Print this Manual
To print this manual, choose one of the following options:
•Printing a Page from HTML. Each page in the HTML version of the manual is dedicated to
a major topic. Select File > Print from the browser menu to print the page contents.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
Product Version WFS709TP ProSafe Smart Wireless Switch
Manual Publication Date May 2007
Note: Product updates are available on the NETGEAR, Inc. website at
http://www.netgear.com/support.