Netum NT-1228BL User manual

· Bluetooth Connecon
· 2.4Ghz Wireless Conneon
. USB Wired Connecon
Package Included:
1 X Scanner; 1 X USB Receiver; 1 X USB Cable; 1 X Quick Setup Guide

1
Quick Setup Guide.
1.Working via USB Cable
①.Connect scanner with your device via USB cable.
②.USB HID-KWB mode was set by default.
③.Set Keyboard language→See page (5) .
④.Locate the cursor on the place where you want scanner to output the codes
then you can start to scan.
How to Start
There are three kinds of connecon modes:
·USB Wired
·2.4GHz Wireless Connecon
·Bluetooth Connecon
Choose one of the following connecng ways to get started.
2.4 GHz Wireless
USB2.0 Wired
Important Note: This is a general manual. It applies to model W8-X and W6-X
Please pay aenon to the tle when you are using the command barcodes.

2
2.Working via 2.4GHz USB Receiver (By default)
①.Scan " RF 2.4GHz Transmission".
②.Plug the USB receiver on your device.
③.Set Keyboard language→See page (5) .
④.Locate cursor on the place where you want scanner to output the
codes aer that you can start to scan.
%#IFSN0$1
*RF 2.4GHz Transmit
①.Scan "Bluetooth Transmission".
②.Power on scanner by triggering the buon.
③.Pair bluetooth. →See page(3 )
Bluetooth HID mode (Basic Mode) was set by default.
If you want to work via BLE or SPP , please contact us.
④.Set Keyboard language→See page (5).
⑤.Open a file or soware, locate cursor on the place where you want the
scanner to output the codes then you can start to scan.
3.Working via Bluetooth
%#IFSNO$4
Bluetooth Transmission

·NO soware installaon required
·Connects to most devices
·Scanner interacts with host device like a keyboard
Basic Mode Features:
How to pair bluetooth under Basic Mode (HID) ?
Android: Connect Android Device in Basic Mode (HID)
1. Power on the scanner. The LED light will be flashing.
2. Touch Home | Menu | Sengs | Wireless & Networks | Bluetooth sengs
3. Make sure the device has Bluetooth “On”.
4. In the list of found devices, select “Netum Bluetooth”. Tap Pair.
5. The scanner will make one long beep aer bluetooth paired and LED light will
turn to solid blue (no blinking).
3
1.Basic Mode (HID) (Default)*
Human Interface Device Profile
By scanning below barcode scanner will enter "Basic Mode".
For the details on how to pair bluetooth on Basic Mode see page (3)
Bluetooth Connecon Modes
AT+MOBE=2
Basic Mode

Apple: Connect Apple iOS Device (HID)
1.Power on the scanner. Blue LED light will start to flash.
2.Start a Bluetooth device search.
IOS: Tap Sengs | General| Bluetooth. Turn on. A Bluetooth device search
will begin.
3. In the device list, tap on “Netum Bluetooth”. Tap Pair.
4. The scanner will make one beep once it’s connected and LED light will turn
to solid blue (no blinking) and is ready to scan.
Windows: Connect Windows PC(HID)
1.Power on the scanner. Make sure the scanner is discoverable (unpaired).
2. Use your computer’s Bluetooth Sengs to connect to the scanner.
3. Open Devices and Printers and select “Add a device”.
4. In the device list, select “Netum Bluetooth”. Click Next.
5. Follow the remaining screens to complete the wizard.
6. The scanner will make one beep once it’s connected and LED light will turn
to solid blue (no blinking) and is ready to scan.
4
USB HID-KBW
By default, the scanner is in HID mode as a Keyboard device. It works on a Plug
and Play basis and no driver is required.
USB Wired Connecon Mode
%#IFSO$2
* USB HID-KBW
Important Note:
Scanner will power off automacally if device is not connected within 1min.

5
USB COM (Virtual Serial Port)
If you connect the scanner to the Host via a USB connecon, the USB COM Port
Emulaon feature allows the host to receive data in the way as a serial port
does. A driver might required for this feature.
%#IFSO$3
USB COM (Virtual Serial Port)
Netum barcode scanners are factory programmed for the most common terminal
and communicaons sengs. If you need to change these sengs, programming
is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an
opon indicates the default seng.
*Important Notes: Many of the command barcodes only work with a scanner in a
parcular Bluetooth or 2.4GHz mode as indicated by the header row of each
page.
Barcode Programming

6
$LAN#GE
Germany keyboard
$LAN#IT
Italy keyboard
$LAN#ES
Spain keyboard
$LAN#TK
Turkey Q keyboard
$LAN#UK
UK keyboard
$LAN#FC
Canadian FR keyboard
$LAN#EN
*America EN keyboard
$LAN#FR
French keyboard
For example: If you use French Keyboard, scan barcode of “ French Keyboard”.
Locate the cursor on the place where you want to output the data then you can
start to scan. American Keyboard is set by default, if you use a US keyboard you can
just ignore it.
Keyboard Language

7
*Normal Mode
Store Mode
Working Mode (Apply for 2.4GHz and Bluetooth Connecon)
Output Stored Data
Clear Memory
Normal Mode: Data will be uploaded aer each scan at real me.
Output Total Entry
Store Mode: All scanned data will be stored directly into the memory of the device.
Output Stored Data:All data entries in the buffer memory will be manually uploaded
aer reconnecng to the working staon.
Output Total Entry: Gross quanty of the uploaded data entries will be summarised.
Clear Memory: All data in the buffer memory will be deleted.

8
Beep Off: Disable scanner from beeping to indicate successful scans.
Beep Sengs
$BUZZ#0
Beep OFF
$BUZZ#1
*Beep On
Beep On: Enable scanner to beep to indicate successful scans.
The scanner provides a shortcut for seng the terminang character suffix to
CR or CRLF and enabling it by scanning the appropriate barcode below.
Terminator
Scanner connected to a device will power off within 1 min if idle/inacve.
By scanning below command barcode will change the default idle me.
Idle Time
3030051
*CR+LF 3030053
TAB
30300530
No terminator
3030052
CR

9
%BAT_VOL#
Get Baery Rough Volume
When scanner makes 2 beeps or baery volume under 20% please plug USB cable
into scanner and connect the other side with your device to charge power for it.
By scanning below barcode you can get the remaining baery volume.
Charge the baery
$POWER#OFF
Power Off
$RF#ST00
Disabled Idle
$RF#ST06
3Mins
$RF#ST20
10Mins
$RF#ST60
30Mins
$RF#ST02
*1 Mins

Note: Please always provide scanner’s firmware version for reference when you
turn to service team for help.
10
Problem: Some barcodes cannot be read.
Soluon:
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that seng for some barcode types are not commonly
used is off by default. You need to acvate a specific barcode type to get it to
work. Please contact us for help.
FAQ
Queson: Is there any barcodes for applying or removing suffix or prefix ?
And does the scanner support auto sense mode ?
Yes, please turn to customer service for help.
Queson: How to solve the messy code problem encountered while using other
foreign languages?
Soluon:
The default language is English. If you use other types of keyboard please refer to
“Keyboard language”, See page 6.
Problem: Barcodes can be read, but cannot be displayed.
Soluon:
a. Please verify if your scanner is on a store mode.
b. Contact us to get command barcode for configuring the baud rate.
$SW#VER
Read below command barcode to check scanner’s firmware version.
Firmware Version:

Problem:When the scanner works on Mac computers via USB cable why they
scrambled the digits.
Soluon: Get command barcode of" MAC-KEY MULL OFF" from the service team
to solve this problem.
Contact Informaon
Tel.:[phone]
Email:[email protected]
Website:www.gzxlscan.com
Addr.:Unit 137, The Pacific Industry Park, Xintang Town,Zengcheng District,
Guangzhou,China/511340
Made in China
Support
For any inquiries concerning our products, please send an email to
[email protected].
11
Problem: Bluetooth can not be paired.
Soluon: Scan “AT+MOBE=2”and re-paired it again
Problem: Got a W8-X 2D scanner but it can not read datamatrix GS1.
Soluon: Please contact us to get the command barcode to enable the scanner
output Datamatrix GS1.
Problem: Got W6-X 1D scanner but it can not read EAN/UPC with 2 or 5 supplements.
Soluon: Please contact us to get the command barcode to enable scanner to decode
the supplements.