Nevco 530 Specifications

1/21/2011 135-0068
Scoreboard Operator’s Instructions
MPC Control
Home
Score
Guest
Score
Start
Clear
Confirm
Cancel
7
4
1
8
5
2
Blank
9
6
3
0
No
Yes
Chronometer
(Time of Day)
Options
Time Out Timer
Time
Alternate Time
Control
Horn Set
Time
On
Time
Off
Model Code 530
Tennis/
Volleyball
Home
Sets
Won
Guest
Sets
Won
Home
Games
Won
Guest
Games
Won
Adv.
Game
Number
Serve
Some features on the keyboard overlay may not be included on the particular model being operated.
Since 1934
Retain this manual in your permanent files

These Instructions are for the Following Models:
LED models:
2700- Tennis / Volleyball
2700-F715,F712- Tennis / Volleyball
2710- Tennis / Volleyball
2710- F715,F712- Tennis / Volleyball
2715- Tennis / Volleyball
2715- F715,F712- Tennis / Volleyball
2740- Tennis / Volleyball
2740- F715,F712- Tennis / Volleyball
2750- Tennis / Volleyball
2750- F715,F712- Tennis / Volleyball
2760- Tennis / Volleyball
2760- F715,F712- Tennis / Volleyball
2770- Tennis / Volleyball
2770- F715,F712- Tennis / Volleyball
2775- Tennis / Volleyball
2775- F715,F712- Tennis / Volleyball
9710
LED models:
2550-Tennis / Volleyball
2550-D-Tennis / Volleyball
2560-Tennis / Volleyball
2600-Tennis / Volleyball
2610-Tennis / Volleyball
2615-Tennis / Volleyball
2640-Tennis / Volleyball
2650-Tennis / Volleyball
2670-Tennis / Volleyball
2675-Tennis / Volleyball
9510
9515
Incandescent models:
2050-Tennis / Volleyball
2250-Tennis / Volleyball
2450-Tennis / Volleyball
2460-Tennis / Volleyball
9410
Thank You
Thank You for choosing NEVCO. We appreciate your business.
The following instructions will help you become familiar with the operation and features of the scoreboard system.
Please take a few minutes to study this manual, and to practice with the control.
If you ever have any questions or comments, please call or email us.
NEVCO, Inc.
301 East Harris Avenue
Greenville, IL 62246-2151 USA
USA TOLL-FREE 800-851-4040
CANADA TOLL-FREE 800-461-8550
International Telephone: [phone]
Website: www.nevco.com
Email: [email protected]

Figure 1 – MPC Control (front view)
A. MPC Control Can operate scoreboards for a wide range of sports and features.
B. Power Supply 9 V DC (included with the control)
C. Overlay Fits on top of control to label the keys (included with system)
D. Hand Held Switch A TCS-5 time control switch is included with each control.
Other switches are included with the accessories they operate.
E. 3 character Model Code location This code sets up the control for your scoreboard model and sport
F. Keypads Left and Right (20 keys each)
G. 16 character display Bright LED for better visibility
H. Power On / Off switch Removes power from the control only (does NOT turn power off to
scoreboard)
I. Jack for hand held switch One on each side of control (use either jack for any Hand Held switch)
I
H
F G
A
B
E
C
D
D

Figure 2 – MPC Control (rear view)
A. MPC Control Universal – to change sports, change the Overlay and enter the new Model Code.
B. Power Supply 9 V DC (included with control)
C. Overlay For your scoreboard model (included with system)
J. Coiled Cord Stretches to over 4 ft. (included with switch)
K. Socket for coiled cord Makes it easy to replace the cord
L. LED test indicator Verifies that the Hand Held switch is working
M. Remote push button switch Function depends on type of Hand Held switch (on TCS-5 – sounds the horn)
N. Remote rocker switch Function depends on type of Hand Held switch (on TCS-5 – controls the time)
O. Output to scoreboard BNC connector for coax cable (use either or both as needed)
P. Jack for power input 9 V DC
C K
A
O
N
J
L
M
P B

TABLE OF CONTENTS
START UP PROCEDURE ............................................................................................................ 1
START WHERE TURNED OFF LAST?........................................................................................ 1
GO TO ABOOKMARK?............................................................................................................... 1
ENTER YOUR MODEL CODE .................................................................................................... 1
QUICK START GUIDE ................................................................................................................ 2
KEYBOARD FUNCTIONS .......................................................................................................... 3
OPTIONS........................................................................................................................................ 9
SET OPTIONS CHART................................................................................................................... 9
THE SET OPTIONS MENU .......................................................................................................... 10
TROUBLESHOOTING CHART .............................................................................................. 13
GLOSSARY.................................................................................................................................. 14
MY BOOKMARK PROGRAM CHART .................................................................................. 16
APPENDIX (CHRONOMETER) ............................................................................................... 17
EXAMPLE................................................................................................................................ 19
Set The Chronometer ............................................................................................................ 19
APPENDIX (SEGMENT TIMER) ............................................................................................. 20
EDITING THE SEGMENT TIMER ........................................................................................ 21
Review the Segment List........................................................................................................ 21
Add A Segment to the List ..................................................................................................... 21
Shorten the Segment List ...................................................................................................... 22
Change the Length of a Segment.......................................................................................... 22
EXAMPLES.............................................................................................................................. 23
Act like an INTERVAL HORN............................................................................................. 23
Practice Drills ........................................................................................................................ 24
Typical Soccer Application.................................................................................................... 25
Pre-Match Protocol for College Volleyball .......................................................................... 26
TROUBLESHOOTING CHART..................................................................................................... 27
MY SEGMENT TIMER LIST ................................................................................................ 28

1
START UP PROCEDURE
When you turn the control on, the traveling display prompts you to “START WHERE TURNED OFF LAST?”, “GO TO A
BOOKMARK?”, or “ENTER YOUR MODEL CODE”. Answer YES, NO, or enter the 3 character model code on the
overlay.
NOTE: Make sure the proper overlay for the scoreboard and sport or special function is in place on the control.
START WHERE TURNED OFF LAST?
If a power failure happens during a game, press YES to resume from the point the power failed. The control can detect
when power is failing and save the current data. (If the time was running when the power failed it will continue running as
soon as power is restored).
NOTE: Intended for recovery from a power failure only. To start a new game, enter the model code or go to a bookmark.
GO TO A BOOKMARK?
A bookmark makes a quick efficient way to start a new game or practice drill. If a bookmark has been saved for this
activity, answer YES to the bookmark question. The control will prompt for the “BOOKMARK #”. Press the number of the
bookmark you want to use (1 to 5). The control will load the configuration and data it had in it at the time the bookmark
was saved.
ENTER YOUR MODEL CODE
To start a new game or procedure, be sure the proper overlay is installed on top of the control. Enter the 3 character model
code located near the top center of the overlay.
NOTE: If your control does not have wireless capability:
The name of the Sport [TENNIS/VOLLEYBALL] will be displayed briefly, then the time and the
direction it will count [ 0:00.0 DN ] will be displayed, and the scoreboard(s) will turn on.
NOTE: If your control does have wireless capability:
The name of the Sport [TENNIS/VOLLEYBALL] will be displayed briefly.
The control will ask “ DO YOU WANT TO OPERATE WIRELESS? ”
If you answer NO :
The time and the direction it will count [ 0:00.0 DN ] will be displayed, and the
scoreboard(s) will turn on.
If you answer YES :
The control will prompt [ SELECT A GROUP ] then display the first group that is
set up in the control. To see the next group name, press NO. When the desired group name is
being displayed press YES.
The time and the direction it will count [ 0:00.0 DN ] will be displayed, and the
scoreboard(s) will turn on.
NOTE: If the control displays the message “ THERE ARE NO GROUPS
DEFINED IN THIS SYSTEM KEY. TO CREATE A NEW
GROUP USE MODEL CODE 618 WITH THE SYSTEM
KEY MANAGEMENT OVERLAY ”, then, turn the control off and follow
the instructions that came with the System Key Management Overlay with model code
618 to set up the groups as needed.

2
QUICK START GUIDE
With the scoreboard on and the control showing the time, you are ready to set the game number.
[ 0:00.0 DN ]
Set the game number
Press
The control will show [ GAME # ]
Press
The control will show [ GAME # 1 ]
You are now ready for the game to begin.
To set the serve indicator
Press
The control will show [ SERVE ]
Press
The control will show [ H SERVE ]
Press
The control will show [ SERVE G ]
Please consult the following sections of this manual for more details, functions, and features.
Game
Numbe r
Set
1
Serve
Serve
Serve

3
KEYBOARD FUNCTIONS
Use the YES key to respond to questions and to confirm data input.
Use the NO key to respond to questions and to cancel an operation.
Use the SET key ahead of a function key to initiate the direct entry mode or to change the settings in OPTIONS,
CHRONOMETER, and TIME OUT TIMER, or to set the TIME, and other features. (For more details see
the description for the function.)
Press the HORN key to sound the scoreboard horn. Release the key to stop the horn.
The horn automatically sounds when the timer counts down to zero. (Auto Horn)
NOTE: The duration of the horn is limited to 4 seconds.
Press SET then HORN to disable or enable the AUTO HORN.
The control will prompt [ AUTO HORN ? (Y/N) ] . The default setting is auto horn on.
Press the OPTIONS key to see a scrolling report of the current system settings.
Press SET then OPTIONS to change the system configuration.
NOTE: See the section on OPTIONS for more details.
Options
Horn
Set
Yes
No

4
There are 10 TIME OUT Timers available. Timer 0 is preset to 30 seconds with a warning horn at 10
seconds.
Press TIME OUT TIMER START.
The display will prompt. [_TIMER_#__(0-9)?___]
When you enter the desired number, the preset Time Out Time is displayed on the control, and on
the scoreboard if set to do so, and begins counting down. When only the warning time remains, a
warning horn sounds briefly (if set up). When the timer reaches zero, the horn sounds briefly again
and the time begins counting up on the control. Any time the Main Time is turned on, the Main
Time is restored to the display(s) and the Time Out Timer is canceled.
Press SET, then TIME OUT TIMER START to set up a TIME OUT TIMER.
The display will prompt [__TIMER_#__(0-9)?___] Enter the number of the timer to
set up or overwrite. The control will prompt. [__SET____MM:SS____] Enter the total
length for the time out. The control will ask “ DO YOU WANT TO USE TIME
OUT WARNING HORN? ” If you answer YES the control will prompt
[__SET____MM:SS____] Enter the warning time.
The control will ask “ DO YOU WANT TO DISPLAY TIME OUT ON
SCOREBOARD? ”
Press TIME OUT TIMER CLEAR to cancel the currently active portion of the Time Out Time.
(If the warning horn has not yet sounded, it will sound and the timer will continue from the
warning time).
Time Out Timer
Start
Time Out Timer
Clear

5
Pressing the CHRONOMETER key will cause the Time of Day to be displayed on the control. This key can
be enabled so that when pressed it also displays the Time of Day on the scoreboard. NOTE: Pressing the TIME
key or turning the time on will return to displaying the Main Time.
Pressing SET, then CHRONOMETER will enter the set up mode. The questions asked will depend on
your system and its current configuration.
NOTE: Some scoreboard models do not support all settings or options.
Questions that the control may ask include:
DO YOU HAVE AN AUXILIARY TIME DISPLAY CONNECTED?
(NOTE: Auxiliary Time Display models include: 9410, 9510, 9405and 9505).
DO YOU WANT TO DISPLAY CHRONOMETER TIME ON AUXILIARY
TIME DISPLAY?
ENABLE CHRONOMETER KEY TO PUT CHRONOMETER TIME ON
SCOREBOARD?
[__KEY__ENABLED__]
DISABLE CHRONOMETER KEY?
[__KEY__DISABLED__]
SET CHRONOMETER?
[__SET_HH:MM:SS____]
NOTE: Once set, the accuracy of the Chronometer is maintained even while the control is turned off and
disconnected.
TURN CONTROL OFF BUT LEAVE CHRONOMETER TIME
DISPLAYED? (Allows the control to be turned off, disconnected, and stored away in a safe location, while
the scoreboard or auxiliary time display, or both, continues to display a running “time of day” clock.)
DISPLAY CHRONOMETER TIME ON ALL DISPLAYS? (Scoreboard(s)
and auxiliary time display(s))
Follow the prompts. NOTE: If the display goes blank turn the control off to complete the process.
DISPLAY CHRONOMETER TIME ON AUXILIARY TIME
DISPLAY? (Auxiliary time display only)
Follow the prompts. NOTE: If the display goes blank turn the control off to complete the process.
NOTE: For more help and examples see Appendix (Chronometer)
Chronometer
(Time of Day)

6
Press TIME ON To start the main time.
Press TIME OFF to stop the main time.
NOTE: The Time On and Time Off keys may also control other timers in the configuration.
NOTE: The Time On and Time Off keys are disabled if the hand held time control switch is plugged in to
the control.
NOTE: To make these two keys active again, turn the control power off, disconnect the hand held time
control switch, and restart the control. You may use “ START WHERE TURNED OFF
LAST ”, if you wish.
Press TIME to recall the main time to the display. If other timers are in use, successive key presses will toggle
among the main time and the other timers.
Press SET TIME to enter the Time and Period setting mode. The control will prompt
[__SET__MM:SS.s_____]
Enter the Minutes, Seconds, and Tenth Second as needed. Press YES to accept the time
entered.
NOTE: Letters that have not been replaced with numbers will be replaced with
zeros.
NOTE: Pressing NO will allow you to back up to make corrections or to abort without changing
the time.
The control will prompt [___PERIOD______0___]
Enter the Period number or press NO to exit without changing the current data.
Press ADV. to see the current status.
The control will show [_______ADV._______] neither team is in Adv. Press the ADV. Key
again to indicate [__H____ADV._______] and again to indicate
[_______ADV.____G__] and again [__H____ADV.____G__] then
[_______ADV._______]
NOTE: The first time the key is pressed, the current setting will be recalled to the display. Press any other
key to exit without changing the setting. To change the setting, first press the key to recall the current
setting to the display then toggle the setting with each additional press of the ADV. key.
Adv.
Time
Time
On
Time
Off

7
If you are using delay of game clocks, you can set the delay time to a specified number without
affecting the original preset value.
Press SET then MISC. DELAY TIME to enter this special mode.
The control will prompt [__D.G._TIME__SS__] . Enter the special delay of game time, then
press YES to confirm and send the new delay of game time to the delay of game timers, or press NO to
abort without changing the data.
NOTE: This key may not be labeled on your overlay. It is to the immediate right of the HORN key.
Press SERVE to see the current status.
The control will show [_______SERVE_______] if neither team has served yet. Press the
SERVE. Key again to indicate [__H___SERVE_______] and again to indicate
[_______SERVE___G__] .
NOTE: The first time the key is pressed, the current setting will be recalled to the display. Press any other
key to exit without changing the setting. To change the setting, first press the key to recall the current
setting to the display then toggle the setting with each additional key press. To clear both settings press
SET then SERVE.
Press GAME NUMBER to display the game number and enter the ADD mode.
The control might display [_GAME_#____1+___] . In this example the current game number is 1
and the “+” indicates that the control is ready to add to the current number. Enter a single digit number or
press NO or YES or another function key to abort and leave the data unchanged.
NOTE: You cannot subtract. To correct a mistake use the SET key, then the Game Number key and
directly enter the correct number (up to 9).
Press HOME GAMES WON to recall the Home Games Won and to enter the ADD mode.
The control might prompt [_H.GAMES WON___2+__] . In this example the Home Games
Won is 2 and the “+” indicates that the control is ready to add to the current total. Enter a single digit
number or press NO or YES or another function key to abort and leave the data unchanged.
NOTE: You cannot subtract, but you can use the SET key first, then directly enter the correct total (up to
19).
GUEST GAMES WON works the same way.
Home
Games
Won
Guest
Games
Won
Game
Number
Serve
Misc.
Delay
Time

8
Press HOME SETS WON to recall the Home Sets Won and to enter the ADD mode.
The control might prompt [_H.SETS WON___2+__] . In this example the Home Sets Won is 2
and the “+” indicates that the control is ready to add to the current total. Enter a single digit number or
press NO or YES or another function key to abort and leave the data unchanged.
NOTE: You cannot subtract, but you can use the SET key first, then directly enter the correct total (up to
9).
GUEST SETS WON works the same way.
Home
Sets
Won
Guest
Sets
Won

9
OPTIONS
Many options are available for modifying the way the scoreboard system works. The questions the control
will ask and their order depends on the current system and settings. Pressing the OPTIONS key starts a
scrolling report of the current system settings. This report will continue to repeat until a key is pressed. To
change a setting, press SET OPTIONS and use the YES (confirm) and NO (cancel) keys to work your way
through a series of questions that is based on your system and available options. When all questions have
been asked, the control returns to normal operating mode.
Note: press a function key to abort the set options mode early.
Set Options Chart
Y
Do You Have An
Auxiliary Time Display
Connected? (this question
may not always be
asked)*
N Next Available Question
Y
Changes rightness level of
Scoreboard
Switch to (Dim or
Bright)?
N Next Available Question
Y
Y
Start and Stop with
Hand Held Switch? N
SET HH:MM:SS Y
Y
Y Aux Timer To Count Down?
N
Start and Stop with
Hand Held Switch? N
SET MM:SS
Display Aux Timer on Auxiliary
Time Display? **
N
Use Aux Timer?
N Next Available Question
Y Display Chronometer on
Auxiliary Time Display
** N
Next Available Question
Y SET MM:SS
Y Displays Segment Timer instead of
main time
Display Segment
Timer on
Scoreboard? N Displays Main time with Interval
Horn
Y Waits for time on
Y SET MM:SS Another Segment?
N
Stop Time at Each
Segment? N Runs continuously
Enable Segment Timer?
N Next Available Question
Y
Y SET MM:SS
Y
Do You Want Clock to Stop
at Specified Time? N
Next Available
Question
Change Direction of Main
Clock?
N Next Available Question
Y
Disable Tenth Sec?
N Next Available Question
Y Bookmark #?
Set a Bookmark?
N Normal Operation Mode
*NOTE: This question is asked only once for each time the control is started fresh by entering a model
code. It may be asked from SET OPTIONS or from SET CHRONOMETER. The control needs to know this
information in order to know what other questions to ask and how certain data should be handled.
** Questions will be asked only if you indicated that you have an Auxiliary Time Display connected.

10
The Set Options Menu
DO YOU HAVE AN AUXILIARY TIME DISPLAY CONNECTED?
The control will need to know if an auxiliary time display is connected as part of your system. The Auxiliary Time
Display is used to display time (Main Time, Auxiliary Time or Time of Day). Auxiliary Time Display models include:
9410, 9510, 9405 and 9505.
NOTE: This question is asked only once for each time the control is started fresh by entering a model code. It may be
ask from SET OPTIONS or from SET CHRONOMETER. The control needs to know this in order to know what other
questions to ask and how certain data should be handled.
DO YOU WANT TO SWITCH TO DIM?
OR
DO YOU WANT TO SWITCH TO BRIGHT?
Answering YES will toggle the brightness level of the scoreboard.
USE AUX TIMER?
OR
SET AUX TIMER?
OR
TURN AUX TIMER OFF?
The control has a built in auxiliary timer that can be used for many purposes. It can be configured to count up or down
and it can run continuously or only when the main time is running. It can be displayed on the control by pressing the
time key twice in succession. It can also be configured to display on an auxiliary time display if one is part of your
system. Some uses for the auxiliary timer include timing field or facility usage, or it can be used to determining how
far into a game a certain event happened.
AUX TIMER TO COUNT DOWN?
Answering YES will setup the timer to count down (99 hours: 59 minutes: 59 seconds maximum).
NOTE: The auxiliary time display will show hours and minutes until the remaining time drops
below an hour, then it will show minutes and seconds.
Answering NO will setup the timer to count up (59 minutes: 59 seconds maximum).
START AND STOP WITH TIME CONTROL SWITCH?
Answering YES will setup the timer to start and stop with the action of the same switch that controls the
main time.
Answering NO will setup the timer to run continuously regardless of the switch position.
DISPLAY AUX TIME ON AUXILIARY TIME DISPLAY?
Answering YES will cause the aux time to be displayed on the auxiliary time display.
Answering NO will cause the auxiliary time display to continue displaying the main time or the time of day.
DISPLAY CHRONOMETER TIME ON AUXILIARY TIME DISPLAY?
Answering YES will cause the time of day to be displayed on the auxiliary time display.
Answering NO will allow the auxiliary time display to continue without change.

11
ENABLE SEGMENT TIMER?
A segment timer is a separate internal timer that automatically resets itself to the next time in a pre-determined list.
When the time counts down to zero, the horn sounds and the next segment of time in the list is loaded and it continues
to run. When the end of the list is reached, it starts over with the first segment and continues indefinitely. It is
primarily used for practice drills.
An Interval Horn is a horn that sounds every time the main time is evenly divisible by the interval time. Its primary
use is to signal when little league hockey teams should rotate to the court.
The Segment Timer can be set up for practice drills or to work like an interval horn.
For interval horn, enable the timer, set only the first segment, and do NOT display the segment timer on the
scoreboard. During normal game play, a horn will sound each time the length of the segment elapses.
Enabling the Segment Timer will allow entry of the time for segment 01. Enter the minutes and seconds as desired
then press YES.
ADD ANOTHER SEGMENT?
There can be as many as 40 segments in the segment list. When the end of the list is reached, the segment
timer starts over with segment 01.
or
DISABLE SEGMENT TIMER?
Disabling the segment timer clears all segments and returns to normal operation.
NOTE: If you will want to use this configuration again, be sure a bookmark has been saved before disabling.
NOTE: If the segment timer has been displayed on the scoreboard, to return to normal operation it is necessary to turn
the control power off and start fresh with a model code or from a bookmark.
or
EDIT SEGMENT TIMER?
The edit option allows you to review the segment list, shorten the list, extend the list, or change a segment’s time.
NOTE: For more help and examples see Appendix (Segment Timer)
DISPLAY SEGMENT TIMER ON SCOREBOARD?
If you answer YES, the segment time is displayed instead of the main time and is started and stopped with
the time control switches.
NOTE: To return to normal operation it will be necessary to turn the control power off and start fresh with a
model code or from a bookmark.
Answering NO will cause the segment timer to act like an interval horn.
STOP TIME AT EACH SEGMENT?
If you answer YES, the time will stop at each segment and wait for TIME ON.
NOTE: If you are using a hand held time control switch, turn the switch off, then on.
or
ALLOW TIME TO RUN AFTER EACH SEGMENT?
NOTE: For more help and examples see Appendix (Segment Timer)

12
CHANGE DIRECTION OF MAIN CLOCK?
Toggles the direction the main clock runs.
CLOCK TO STOP AT SPECIFIED TIME?
A stop time may be set when the timer direction is changed to up count. When the clock reaches the stop
time, the clock stops and the auto horn will sound if enabled.
If you answer YES, you are prompted for the stop time. Follow the prompts.
DISABLE .1 SEC. SHIFT TIMER?
During the last minute of count down time, the scoreboard switches to displaying the seconds and tenths of seconds.
Press YES if you want to turn off this feature.
NOTE: Once disabled the only way to restore it is to restart the control and enter the model code or go to a bookmark.
SET A BOOKMARK?
A bookmark is like a picture or snapshot of all the data and configuration settings in the control. When you go to a
bookmark, the control is restored to where it was at the time the bookmark was saved.
Bookmarks can be edited by going to the bookmark, making the changes needed, then saving the bookmark again
using the same bookmark number or a different one.
Five separate bookmarks are available and each can be reused as desired.
If you try to save to a used bookmark, you will be warned and given a chance to abort the procedure.
NOTE: A bookmark cannot be saved while a timer is running.

13
TROUBLESHOOTING CHART
Problem Cause Solution
Cannot Save a Bookmark Time is running Turn time off before saving a bookmark
Horn does not sound when time has
expired Auto horn is turned off Enable the auto horn (SET HORN YES)
Timer counts in wrong direction Timer direction is set wrong Use SET OPTIONS to change timer
direction
Cannot subtract from score Score keys will add only Use SET then score key and enter the
correct score directly
Time is counting but the period is wrong Wrong period entered during setting
time
Press SET TIME NO and enter the
correct period number
Cannot clear Time Out Timer from
scoreboard without sounding horn
(teams are ready to play)
Clearing the Time Out Timer forces it to
drop to the warning time which sounds
the warning horn
Before the game, set up another Time
Out Timer that does not have a warning
time and does not display on
scoreboard. --- interrupt the unneeded
Timer with this one and then clear it.
Main clock is counting up. Tenth second will not show when main
time is counting up
Tenth second has been disabled The control must be turned off and then
restarted
Tenth second does not show on
scoreboard
Time is above one minute Be patient
CHRONOMETER will not display on
scoreboard when I press
CHRONOMETER
CHRONOMETER key is not enabled Use SET CHRONOMETER to enable it
Aux time is displayed on the auxiliary
time display, but it is not counting
Hours and minutes are being displayed.
The display will change only once each
minute
Minutes and seconds will be displayed
during the last hour of remaining time
If the problem persists please contact the Nevco Service Department.
800-851-4040

14
GLOSSARY
ALTERNATE TIME CONTROL SWITCHES (keys): Located on the keypad, these 2 keys, TIME ON
and TIME OFF, may be used instead of the Hand Held Time Control Switch.
NOTE: These 2 keys are inactive while the Hand Held Time Control Switch is plugged in. To enable them,
turn the control off, unplug the Hand Held Switch and restart the control. You may use “Start Where Left off
Last” if you wish.
AUTO HORN: Sounds for a minimum of 2 seconds when the main time has expired or reached the stop time.
(Can be disabled from the control)
AUX TIMER: An auxiliary timer, separate from the main timer, that can be configured to count up or down and to start and
stop with the time control switch or run continuously. It can be viewed on the control (press the time key twice) or on
an AUXILIARY TIME DISPLAY . Some uses for the aux timer include timing field or facility usage, or determining
how far into a game a certain event happened.
AUXILIARY TIME DISPLAY: Consisting only of a timer, it can display the main time, the AUX TIME or
the Chronometer (Time of Day Clock). Auxiliary Time Display models include: 9410, 9510, 9405 and 9505.
BATTERY: Battery powered memory saves the settings and data in the control in case of power failure. It also
maintains the accuracy of the CHRONOMETER when the control is unplugged.
BEEPER: Confirms each key press and alerts operator when a special event such as time expired or an Entry Error
has occurred.
BOOKMARK: Saves the current control settings and data so it can be easily recalled later. (5 Bookmarks are
available)
BRIGHTNESS LEVEL: The scoreboard can be set to bright or dim for best viewing. Indoor scoreboards
default to bright; outdoor scoreboards default to dim.
CHRONOMETER: Time of Day Clock. Once the correct time has been set, the accuracy of the Chronometer is
maintained even while the control power is unplugged. During normal operation, the Chronometer can be
displayed on the control by pressing a single key. This key can be armed so that when pressed, the Time of
Day is also displayed on the scoreboard.
NOTE: Pressing the TIME key or turning the time on will return the main time to the display(s).
DISPLAY: A 16 character display on the control prompts the operator for input and can monitor the scoreboard
data.
ENTRY ERROR: A visual and audible warning that an invalid action was attempted. Its normal duration is 2
seconds however you may interrupt it and continue immediately.

15
HAND HELD TIME CONTROL SWITCH: A hand held switch with a coiled cord that plugs into either
side of the control. When connected, the alternate time control switches (keys) are disabled. (Makes it easier
for another person to control the main time or sound the horn).
INTERVAL HORN: A horn that sounds repeatedly at preset intervals throughout the game. Its primary use is to signal
when little league hockey teams should rotate to the court. The Interval Horn has been replaced by a more versatile
SEGMENT TIMER. (See Segment Timer)
MODEL CODE: A 3 character code found on the OVERLAY that when entered into the control, sets up he
control for a particular scoreboard model and sport or special function.
OPTIONS: Settings that determine how the scoreboard system operates.
OVERLAY: A flat plastic panel that fits over and around the keys on the control. Tabs at the top and bottom hold it in
place. Each overlay provides the proper labeling for each key and a three character Model Code. A brief set of
operating instructions is printed on the back of each overlay; you may make copies if you desire. When you want to
change to a different sport, install the correct overlay and enter the new Model Code.
SEGMENT TIMER: Sometimes called Practice Timer, it allows a list of time segments to be programmed into
the control. The list can then be used for a practice routine or drill. When started, the first segment on the list
is loaded into the main timer and starts counting down. When zero is reached, the horn sounds and the next
segment is loaded and begins counting down with no intervention needed.
NOTE: The Segment Timer has replaced the Interval Horn and can mimic it exactly.
SUB HORN: When armed, waits until the main time has been stopped, then sounds automatically to alert the
officials that a player is waiting to be substituted into the game.
TENTH SECOND SHIFT TIMER: Automatically shifts from displaying minutes and seconds to seconds
and tenths of seconds during the last minute of count down time. (May be disabled if desired)
TIME OUT TIMER: Programmable for different time out lengths and with optional warning horn and an option
to display the Time Out time remaining on the scoreboard. (Ten different time out timers are available. Timer
0 is preset to 30 seconds with a warning horn at 10 seconds and is not displayed on scoreboard. )