New Holland TD 60D User manual

TD60D -- TD70D -- TD80D -- TD90D --
TD95D MODEL TRACTORS
SERVICE MANUAL
SECTIONS
GENERAL 00....................................................
ENGINE 10......................................................
CLUTCH 18......................................................
GEARBOX 21....................................................
TRANSMISSION OF MOTION 23...................................
FRONT MECHANICAL TRANSMISSION 25..........................
REAR MECHANICAL TRANSMISSION 27...........................
POWER TAKE- OFF 31............................................
BRAKES 33......................................................
HYDRAULIC SYSTEMS 35........................................
STEERING 41....................................................
AXLE AND WHEELS 44...........................................
AUXILIARY EQUIPMENT 50.......................................
ELECTRICAL SYSTEM 55.........................................
CAB 90..........................................................
SERVICE

39
SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
ENGINE
Removal -- Installation (Operation 10 001 10)
1. Disconnect the battery negative cable.
2. Drain oil from the transmission/gearbox.
3. Drain the cooling system.
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks.
Check that no one is in the vicinity of the load to be
lifted.
WARNING
Always use suitable tools to align holes in parts.
NEVER USE FINGERS OR HANDS.
10
25621
11
4. Unscrew the nut (1) from the weight retaining pin.
1
TRE0601A

40 SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
12
5. Remove the weights (1) from the front support.
1
TRE0602A
13
6. Remove the exhaust pipe, attach lifting chains to
the bonnet (1) and attach the chain to the hoist. 1
24872
14
7. Disconnect the electrical leads (1) from
headlamps (2).
24873
1
2
15
8. Detach the gas struts (1) from the bonnet. 1
TRE0603A

41
SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
16
9. Remove the four bonnet hinge bolts (1) and lift
the bonnet clear.
1
TRE0604A
17
10. Remove the wire mesh guard (1) from right--
hand side of the fan.
25028
1
25046
18
11. Disconnect the tachometer cable (1) and
remove the retaining ring and sleeve.
1
19
12. Detach the throttle control spring (1) and remove
the throttle lever (2). 1
2
25183

42 SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
20
24892
2
1
13. After recovering the air--conditioner gas (HRC
134a) with the recovery and recycling station
294048, disconnect the pipes of the cab air
conditioner (1) and (2).
21
14. Detach the cab heating pipes (1) and (2).
1
2
25411
22
15. Disconnect the power steering hoses (1).
1
TRE0605A

43
SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
23
1
TRE0606A
16. Disconnect the electrical connectors. Detach the
fusebox by unscrewing the nut (1).
24
17. Disconnect the delivery and return lines (1) to the
power steering cylinders.
1
TRE0607A
25
18. Remove the hose (1) from the lift pump suction
pipe.
1
TRE0608A

44 SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
26
19. Detach the lift pump delivery pipe (1).
1
TRE0609A
27
20. Detach the fuel pipes from the injection pump
and fuel pump and the pipe connecting the tank
to the sedimentation filter.
TRE0610A
28
21. Remove the fuel filter (1) complete with its sup-
port.
25035
1

45
SECTION 10 -- ENGINE -- CHAPTER 1
87616423 -- 01 -- 2007
29
22. Remove the front, centre and rear retaining bolts
from the front axle drive shaft guard and remove
the guard.
25038
30
23. Remove the circlip (2) from the front of the prop
shaft and slide the sleeve (1), in the direction
shown by the arrow, until it is free of the splines
on the front axle.
25039
12
31
24. Remove the circlip (2) from the rear of the prop
shaft and slide the sleeve (1), in the direction
shown by the arrow, until it is free of the splines
on the crankshaft.
25040
1
2
32
25. Remove the middle support bolts (1) from the
propeller shaft and remove the shaft complete
with support.
25041
1

Thank you very much
for your reading.
Please click here to buy
After you pay.
Then, you can
download the complete
manual instantly.
No waiting.