NewLine Q+ Series User manual

Q+ series
User Manual
V1.0
Please keep this Manual properly for future reference!
This manual is a general manual, the pictures are for reference only, please refer to the real product.

Contents
About This Document........................................................................................................................5
Safety Instruction...............................................................................................................................6
1 Overview ..........................................................................................................................................9
1.1 Introduction....................................................................................................................................................................9
1.2 Parts................................................................................................................................................................................9
1.3 Ports..............................................................................................................................................................................10
1.4 Front Buttons................................................................................................................................................................13
1.5 Remote Control ............................................................................................................................................................13
2 Installation Guide..........................................................................................................................15
2.1 Safety Precautions........................................................................................................................................................15
2.2 Installation Precautions ................................................................................................................................................16
2.3 Installation....................................................................................................................................................................18
2.4 Installing the Wi-Fi Module .........................................................................................................................................19
2.5 Installing the Camera(Optional)...................................................................................................................................20
2.6 Installing the OPS (Optional).......................................................................................................................................21
2.7 Installing the SDM-S (Not included) ...........................................................................................................................21
3 Getting Started ..............................................................................................................................23
3.1 Power On......................................................................................................................................................................23
3.2 Power Off.....................................................................................................................................................................23
3.3 Calibration....................................................................................................................................................................25
4 Operating the Touch Screen.........................................................................................................28
4.1 Profile Log-on ..............................................................................................................................................................28
4.2 Home............................................................................................................................................................................30
4.3 OPS...............................................................................................................................................................................35
4.4 Sources .........................................................................................................................................................................35
4.5 Whiteboard...................................................................................................................................................................36
4.5.1 Whiteboard Functions ...............................................................................................................................................39
4.5.2 Page Operations.........................................................................................................................................................47
4.5.3 Whiteboard Setting....................................................................................................................................................48
4.6 Annotation....................................................................................................................................................................51

3
4.7 Tutorial .........................................................................................................................................................................54
4.8 Tool bar.........................................................................................................................................................................55
4.9 Gadget ..........................................................................................................................................................................58
4.9.1 Newline Cast.............................................................................................................................................................59
4.9.2 File Management.......................................................................................................................................................60
4.9.2.1 File Viewer Page ....................................................................................................................................................60
4.9.2.2 File Preview............................................................................................................................................................61
4.9.2.3 File Search..............................................................................................................................................................61
4.9.2.4 File Filtering...........................................................................................................................................................61
4.9.2.5 New Folder.............................................................................................................................................................62
4.9.2.6 File Operation.........................................................................................................................................................62
4.9.2.7 File Name...............................................................................................................................................................63
4.10 System Settings ..........................................................................................................................................................63
4.10.1 Network...................................................................................................................................................................64
4.10.2 Connected devices...................................................................................................................................................65
4.10.3 Language & Input....................................................................................................................................................65
4.10.4 Date &Time.............................................................................................................................................................66
4.10.5 Storage.....................................................................................................................................................................69
4.10.6 Apps.........................................................................................................................................................................70
4.10.7 Display & Theme ....................................................................................................................................................70
4.10.8 Tool Bar...................................................................................................................................................................71
4.10.9 Input and Output Setting .........................................................................................................................................72
4.10.10 Power Setting ........................................................................................................................................................72
4.10.11 Screen Eye Filters..................................................................................................................................................75
4.10.12 System...................................................................................................................................................................75
4.11 Save Session...............................................................................................................................................................81
4.12 Automatically Power Off ...........................................................................................................................................82
5 Add Shortcut ................................................................................................................................83
5.1 Add Shortcuts to Dock .................................................................................................................................................83
5.2 Delete Shortcuts ...........................................................................................................................................................84
5.3 Newline Assistant.........................................................................................................................................................86
5.3.1 Introduction...............................................................................................................................................................86
5.3.2 Installation.................................................................................................................................................................86
5.3.3 Add Quick Start Windows Programs in Smart System .............................................................................................86
6 Quick Setting Menu ......................................................................................................................88
7 Serial Port Control........................................................................................................................90
8 FAQs & Troubleshooting..............................................................................................................97
9 Specifications ...............................................................................................................................100
10 More Information .....................................................................................................................103

4
Welcome to the world of Newline
Thank you for choosing the Newline Q+ series Interactive Flat panel display. Please use this
document to get the most out of your screen.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
⚫Reorient or relocate the receiving antenna.
⚫Increase the separation between the equipment and receiver.
⚫Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
⚫Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
The symbol of the crossed out wheeled bin indicates this product should not be placed in
municipal waste. Instead, dispose of waste equipment by taking it to a designated collection
point for electrical and electronic equipment recycling.

5
About This Document
This document describes multiple functions, instructions, and notes about the product.
Symbols are used in this document to indicate operations that need particular attention. The
symbols are defined as follows:
Provides additional information to supplement
operation in the main text.
Indicates a potentially hazardous situation that, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
Indicates a hazard with risk that, if not avoided, could
result in death or injury.
WARNING

6
Safety Instruction
For your safety, please read the following instruction before you use the product. Serious injury or property
damage may be caused by improper operations. Do not try to repair the product on your own.
Disconnect the product from the power supply immediately if major failures occur.
Major failures include the following:
⚫If smoke, a peculiar smell or an abnormal sound is discharged from the product.
⚫No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power supply
immediately and contact professional staff for troubleshooting.
Do not drop any liquids, metal, or anything combustible onto the product.
⚫If any liquids or metal are dropped onto or into the product, power off the product and
disconnect the power supply. Then contact professional staff for solutions.
⚫Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes, and is not limited to, an inclined plane, a shaky stand, desk or
platform, that might cause the product to turnover and be damaged.
Do not open the panel or change the product on your own.
High voltage components are installed in the product. When you open the panel, high voltage,
electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor for help.
Use the provided power supply.
⚫To prevent the product from being damaged, do not use any types of power cables other than
the one provided with the product.
⚫Use a three-wire socket and ensure that it is properly grounded.
⚫Pull out the power plug from the socket if the product is not used for a long period.
Clean the power plug regularly.
⚫Fire or electric shock may be caused if the product is powered on while you are cleaning.
⚫Pull out the power plug before cleaning it with a dried cloth.
Power output port is 5V/2A.
The voltage/current of the rear power output port is 5V/2A (maximum). Purchase the power
code/AC adapter according to customer needs. The port can be used for the Newline X10D
Android box. Please do not connect any products with different power requirement. Otherwise,
it may cause damage to products or fire.
WARNING

7
Do not put items on the top of the product.
⚫Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics, or liquid
medicine) on the top of the product.
⚫If any water or liquid is spilled on the product, the product may short circuit and cause fire or
electric shock.
⚫Do not walk on or hang any items on the product.
Do not install the product in an improper place.
⚫Do not install the product in humid places, such as the bathroom, the shower room, near
windows, or outdoor environments that experience rain, snow, or other harsh weather. Avoid
installation near hot spring vapor. The preceding environments may cause faults in the product
or electric shock under extreme conditions.
⚫Do not put an exposed fire source, such as a lit candle, on the product.
Pull out the power supply during thunderstorms.
⚫Do not touch the product during a lighting storm, you may experience an electric shock.
⚫Install or place components that supply high enough voltage to cause personal injury out of the
reach of children.
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
⚫Do not install the product near a heat source, such as a radiator, a heat reservoir, a stove or
other heating products.
⚫Do not expose the product to direct sunlight, which may cause high temperatures and
subsequent faults in the product.
When transporting the product:
⚫Pack the product for transport or maintenance by using the cartons and cushioning material
provided with the product.
⚫Move the product vertically during transport. The screen or other components are easily
broken if the product is moved in an improper way.
⚫Before you move the product, disconnect all external connections and separate all topple
preventing products. Move the product carefully to prevent it from being hit or squeezed,
especially the screen, which may cause injury if broken.
Do not cover or block up any vents on the product.
⚫Any overheated components may cause fire, damage the product, and shorten the service life.
⚫Do not lay the product down in a way where the venting surface will be covered.
WARNING
CAUTION

8
⚫Do not install the product on carpet or cloth.
⚫Do not use a cloth such as table cloth to cover the product.
Keep the product away from the radio.
The product complies with the international EMI standard to prevent radio interference.
However, interference may still exists and causes noise in the radio. If noise occurs in the radio,
try the following solutions.
⚫Adjust the direction of the radio antenna to avoid the interference from the product.
⚫Keep the radio away from the product.
If the screen glass is broken or falls off.
⚫Keep all personnel 10 feet away from the screen to ensure safety.
⚫Do not perform any installation or disassembly while the screen glass is broken or has fallen
off.
Use the battery correctly.
⚫Galvanic corrosion, electric leakage, and even fire may be caused by improper battery usage.
⚫It is recommended to use the designated type of battery and install the battery by the correct
electrodes (positive and negative).
⚫Do not install and use a new battery with a used one.
⚫Take out the battery if the remote control is not used for a long period.
⚫Do not expose the battery to overheated environments, such as sunlight and or heat sources.
⚫Dispose of the used battery based on your local regulations.
Do not damage the power cable.
⚫Do not damage, change, twist, bend, or forcibly drag the power cable.
⚫Do not put weights (such as the product itself) on the power cable.
⚫Do not forcibly drag the cable when you pull out the power plug. If the power cable is
damaged, please contact the local distributor to repair or replace it.
⚫The power cable in the accessory box is for this product only. Do not use it on other products.
Additional advice:
⚫Use the product in an environment with comfortable lighting. It is harmful to your eyes to
watch in a too bright or too dark environment.
⚫Relax your eyes watching for a period of time.
⚫Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
⚫Adjust the volume to an appropriate level, especially at night.
About USB port.
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources. If
the current signal source is reading the data from an external product connecting to the port,
please switch the signal source after the data reading is complete. Otherwise, the data or product
may be damaged.
CAUTION

9
1 Overview
1.1 Introduction
Take collaboration to the next level with the Q+ series interactive display.
Increase productivity and collaboration across the board with a display that uses advanced
touch technology.
Each product can be customized to fit your needs. The non-proprietary nature lets you use the
software you prefer, take notes on local files, wirelessly cast to the panel from smaller
devices, run your favorite apps, and view multimedia files, all while making your experience
better than before.
The newline's 4K Ultra High-Definition LED screen also provides a fluid writing experience.
Annotate over anything on the screen, whether in the embedded whiteboard or while using
any other device. Intelli-Touch automatically identifies pen thickness and color, saving you
time.
1.2 Parts
⚫Front View

10
⚫Rear View
1
Front Ports
10
Power Output Plug
2
Speakers
11
Power Supply Plug
3
Power On/Off
12
Power Switch
4
Front Buttons
13
SDM-S Slot
5
Remote Control Receiver
14
Rear Ports
6
Light Sensor
15
Wi-Fi Module Slot
7
Proximity Sensor
16
OPS Port
8
Microphone
17
Woofer
9
Camera
Notes:
⚫SDM-S is Smart Display Module Small.
⚫The product images shown are for illustration purposes only and may not be an exact
representation of the product.
1.3 Ports

11
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal
sources. If the current signal source is reading the data from an external product
connecting to the port, please switch the signal source after the data reading is complete.
Otherwise, the data or product may be damaged.
For USB use, USB 2.0 provides up to 500Ma whereas USB 3.0 provides up to 900Ma of
power. Please make sure the USB flash drive is formatted to FAT32 before inserting into
the panel.
连接摄像头
( 绘图要求：新增摄像头接口 Camera Port ，接线实物图可参考 Q)
CAUTION

12
The rear power output port is supplies 5 V/2 A (maximum) power. Please contact Newline to
purchase the power AC adapter for powering external devices. Please do not connect any
products which require power than listed. Doing so may cause injury or damage to the panel.
连拔插式电池
65" / 75" / 86"
( 绘图要求：接线实物图可参考 Q)
WARNING
用电源线连笔记本

13
1.4 Front Buttons
Buttons
Operations
Functions
Short press
Power on
⚫Solid white color : Display is on and working
Sleep mode
⚫The red and white lights flicker alternately: Display
enter Sleep mode.
Long press for more
than 2 seconds
Power off
⚫Solid red color : Display is in shut down mode
Short press
Adjust the Volume
Short press
Adjust the Brightness
Short press
Go to the home page
Short press
Open the Quick Setting menu
Long press for 5
seconds
Activate/Exit the power button Lock Function
1.5 Remote Control
Carefully read the following instructions before using the remote control to avoid possible
faults:
⚫Do not drop or damage the remote control.
⚫Do not spill water or other liquids on the remote control.
⚫Do not place the remote control on a wet object.
⚫Do not place the remote control directly under sunlight or near a heat source.

14
Buttons
Operations
Power On/Off
Go to the Home Page
Directional Pad
Confirm/OK
Press once to freeze the current screen. Press
again to exit freeze function
Enter the Source Selection Page
Return to Previous/Exit
App switcher
Open the Quick Setting menu on the
embedded operating system.
Open the menu in Windows system.
Take a Screenshot
Press once to decrease the volume, long press
to decrease the volume continuously
Mute/Unmute Audio
Press once to increase the volume, long press
to increase the volume continuously

15
2 Installation Guide
2.1 Safety Precautions
Installation Environment

16
Installation Direction
2.2 Installation Precautions
Weight Loading
Weight of the product: 143lb/ 65kg (86INCH), 110lb/50 kg (75INCH), 86lb/ 39kg (65INCH)
⚫When using a mobile stand, ensure that the weight of the product is less than the loading
capacity of the mobile stand.
⚫When using the wall-mount bracket, ensure that the wall can support the weight of the
product. We recommend that the wall surface be reinforced and have a loading capacity
4 times of the weight of the product. Consult a professional installer for wall-mount
installation.
⚫Attaching the VESA Mounting Bracket. This apparatus is intended to be supported by a
GS Listed wall-mount bracket.
The company does not undertake relevant legal responsibility for any problems caused by improper
operation if the third party mobile stand, or wall-mount bracket is beyond the scope of the product.
⚫Do not install the product where it might be hit by an opening or closing door.
Vertical installation
When installing the panel, try to keep the panel vertical. An excessive tilt angle may cause
damage to the glass or other internal components.

17
For any problem, please contact our support desk. Our company is not responsible for any damage or
losses incurred by users if the users fails to follow the instructions.
Ventilation
Ensure adequate ventilation and/or an air conditioned environment. We recommend keeping
certain distances from the side of the product to the wall or panels. Ventilation requirements are
shown in following figure:
（ Tips ： Updated to Q+ series front panel figure ）

18
2.3 Installation
The dimensions of the four bracket mounting holes on the back panel are VESA MIS-F
compliant (86 inch or 75 inch: 800 x 400 mm/31.50 x 15.75 in; 65 inch: 600 x 400 mm/23.62
x 15.75 in). Use metric M8 screws with a length of 10 mm to 15 mm (0.40 to 0.59 in) to
secure the touchscreen to the mounting system. Dimensions of the mounting holes on the
back panel are shown on the following figure:
Consult a professional installer to install the display product.
75"/86"
65 inch：

19
2.4 Installing the Wi-Fi Module
Wi-Fi Module does not support hot plugging. Therefore, you must insert or remove the Wi-Fi
Module when the display is powered off. Otherwise, the panel display or Wi-Fi Module may
be damaged.
The Wi-Fi Module is put in accessary box with an independent package, please install it onto
panel referring to following steps.
Step 1 Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
Step 2 Insert the Wi-Fi Module into the port on the rear of the panel until firmly seated, using the 2
screws to secure it.

20
2.5 Installing the Camera(Optional)
The camera is put in accessary box with an independent package, please install it onto panel
referring to following steps. Use the two screws along with camera to fix.
Remove the silicone cover from the middle port on the top of the panel display, then insert the
camera. Install 2 fixing screws for secure purpose. Remove the front cover and start using.