Newskill ICARUS 24 User manual

NS-MN-ICARUS24
INSTRUCTION MANUAL
Please read this manual thoroughly before use,
and keep it handy for future reference.
www.newskillgaming.com

CONTENTS
1. General information ........................................................................................................ 1
1.1 Product description and type of use ................................................................................................................................... 1
1.1.1 General features
1.2 Opening the box ......................................................................................................................................................................... 1
1.2.1 Contents of the box
1.3 Warnings ....................................................................................................................................................................................... 1
1.3.1 Power
1.3.2 Safety precautions
1.3.3 Installation precautions
1.3.4 Cleaning the device
1.3.5 Privacy and copyright
2. CONTROLS & SETTINGS ............................................................................................... 3
2.1 Controls …………….....................................................………………………………………………………………………………………………………..…… 3
2.1.1 Control key board
2.1.2 connectors
2.2 OSD MENU CONTROLS …………………………..............…………………………………................................……………............................. 4
A BRIGHTNESS …………………………............................................………………………………………………………………………………………….. 4
B IMAGE ………………………..............................................…………………………………………………………………………………………..…………… 4
C COLOR TEMP ………………………...........................................……………………………………………………………………………………………… 4
D OSD SETTING ………………………..............………………………………………………………………………............................……………………... 5
E RESET ....……………………….............................................………………………………………………………………………....……………..…………… 5
F MISC ......……………..............................................…………………………………………………………………………………....……………..….…….... 5
3. Product specifications …………………………………………………………………….............……....… 6

GENERAL INFORMATION
Dear Customer,
Thank you for having purchased this product. This document describes how to install and use the LCD
colour monitor. Read this manual which contains information for correct, safe use carefully. Keep this
manual at hand so that you can refer to it when needed.
1.1 PRODUCT DESCRIPTION AND TYPE OF USE
The LED color monitor presents a very rugged structure. It is designed for continuous operation and can
be used in closed circuit TV systems without risks of excessive fatigue. The Flat Panel Display has an active
matrix, thin-film transistor (TFT), liquid crystal display (LCD).
1.1.1 GENERAL FEATURES
• Display area
• Wall mounting with not included bracket
• HDMI, USB & DP,
Multilingual OSD menu for easy setting and optimization of the display
1.2 OPENING THE BOX
Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts
are either missing or damaged. Do not attempt to use the device in this case. Send the product back in its
original packing if it is damaged.
1.2.1 CONTENTS OF THE BOX
• LED monitor
• Power Adaptor
• Power cable
• HDMI2.0 cable
• User’s manual
Important Note: Accessories may be changed without prior notice.
1.3 WARNINGS
1.3.1 POWER
• Only use the power unit provided to power the device.
Check mains rating before plugging the power unit in.
• Do not pull the cable to unplug the device.
1.3.2 SAFETY PRECAUTIONS
• Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce
material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains
and have it inspected by qualified personnel.
• Never open the device. In all cases, contact the qualified or authorized service center for repairs.
• Keep the device away from children, to prevent accidental damage.
• Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
• Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the
device is used in such conditions. Contact the retailer or authorized installer.
• It is advisable to disconnect the power wire if the monitor is not used for a certain time.
1

1.3.3 INSTALLATION PRECAUTIONS
• To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in
the casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not
install sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install
in areas subject to excessive dust, mechanical vibrations or shocks.
• Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device
could fall causing injury or mechanical failures.
• Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of
water onto the device: risk of fire, electrocution or mechanical failure.
• Stop using the device if water or other material should penetrate inside: risk of fire and electrocution.
Contact the retailer or authorized installer.
• Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered.
• Do not place heavy or heat generating objects on top of the device: this could damage the casing and/
or increase internal temperature causing faults.
• Do not cover the device with a cloth while it is running to prevent deforming the external casing and
overheating the internal parts: risk of fire, electrocution and mechanical failure.
• Keep magnets and magnetized objects away from the device to prevent faults.
• Do not use the device in presence of smoke, vapor, humidity, dust or intense vibrations.
• Wait for a while before operating a device immediately after transporting it from a cold place to a
warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to the
new ambient (temperature, humidity, etc.).
• The monitor is provided with a plastic base and rubber feet. It can be positioned on a horizontal
surface, such as a desk or a table. Make sure that the device is fastened firmly and that it is not resting
on unstable supports or surfaces. Dropping could cause severe injury and damage the device.
• Remember to adjust the brightness and contrast to obtain a perfect image.
• The monitor can also be installed on the wall by means of a bracket (not provided).
1.3.4 CLEANING THE DEVICE
• Rub delicately with a dry cloth to remove dust and dirt.
• Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
• Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated clothes to clean
the device to prevent deformation, deterioration or scratches to the paint finish.
1.3.5 PRIVACY AND COPYRIGHT
• The LED monitor is a device for CCTV systems. Recording of images is subject to the laws in force in
your country. Recording of images protected by copyright is forbidden.
• Product users shall be responsible for checking and respecting all local rules and regulations
concerning monitoring and recording video signals. The manufacturing SHALL NOT BE LIABLE for use
of this product not in compliance with the laws in force.
2

CONTROLS & SETTINGS
2. 1 Controls:
2.1. 1 Control key board:
EXIT - + MENU POWER
EXIT: Use this to exit the an item
- : Use this to move down on the on-screen menu.
+ : Use this to move up on the on-screen menu
MENU: Use this to select an menu
Power: Press the power button to open or close the display
Indicator Status
Lit (No): Power off
Lit (Green): Power on
Blinking (Red): Power saving mode
VIDEO SOURCE SELECTION BUTTON
To select the desired signal (" Auto Select "," DisplayPort ", "HDMI”) press the button "+" and "-" to select
the desired item. Press the button "MENU "to confirm.
2.1.2 Connectors
HDMI: (HDMI2.0, 75Hz & FreeSync/ HDR )
DP: (DP1.2, 75 Hz& FreeSync / HDR )
USB: ( charging only )
DC: ( Power, 24V,2A )
3

2.2 OSD MENU CONTROLS
BRIGHTNESS
Change image brightness, according to ambient
light. (0-100)
CONTRAST
It allows the adjustment of contrast between
white and black areas of the image.(0-100)
ECO
It allows to select the energy saving mode
between:”standard , movie , photo , game , FPS,
RTS , user”.
HDR MODE
SET the HDR mode (off/on )
H-POSITION
Change the horizontal position of OSD menu. (0-100)
V-POSITION
Change the vertical position of OSD menu. (0-100)
CLOCK
Chang The the standing time of OSD menu.(0-100)
ASPECT
Change the aspect ratio . (16:9/4:3)
Color TEMP
Adjust color temperature
(Warm,cool, 5600k,7500k, user)
A. BRIGHTNESS
B. IMAGE
C. COLOR TEMP
4

LANGUAGE
Select the desired language
HORIZONTAL
Change the horizontal position of the OSD
menu(0-100)
VERTICAL
Change the vertical position of the OSD
menu(0-100)
OSD TIME
Set the duration of the OSD menu (0-100)
TRANSPARENCY
Set the transparency of the OSD menu (0-100)
IMAGE AUTO ADJUST (disable)
COLOR AUTO ADJUST (disable)
RESET
Restore factory setting
SHARPNESS
Adjust the sharpness(0-4)
BLACK LEVEL
Adjust the brighness of backlight. (0-100)
INPUT
Select from :”DP , HDMI”.
VOLUME
Adjust volume from (0-100)
LOW BLUE LIGHT
Adjust the low blue light ( 0-100)
FreeSync
Set the FreeSync ( ON/OFF)
OD
Set the Over Drive (OFF/ON)
D. OSD SETTING
E. RESET
F. MISC
5

PRODUCT SPECIFICATIONS
Display Specification
Panel Type 24'' (16:9) LED Backlit Monitor
Case Type Plastic
Max Resolution 1920x1080@144 Hz, downward compatible
Active Display Area 596.74(H) X 335.66 (V )
Pixel Pitch 0.2331 (H) x0.2331(V)
Contrast Ratio (Max) 1000:1
Brightness(Max) 350 cd/m²
Response Time 1ms(G2G)
Viewing Angle 170º/160º (CR>10)
Display Colors 16.7M
Adjustable Color Temperature 11000K / 9300K / 7500K / 6500K /USER
Aspect Ratio 16: 9
Speaker Multimedia Speakers Right x 1 Left x 1, 2X3W
Operating Humidity 20 % - 70 %
Operating Temperature - 20 to 60 °C
IN/OUT INTERFACE
Video Interface HDMI, DP,USB
Function HDR,FreeSync
Safety & EMC Certification CE / FCC / ROHS
Stand Type Desktop
Color Black
Button Position Right Hand Side
POWER Voltage 12 V,4A
Power Consumption ≤40W
6