Newskill ICARUS User manual

27 INCH FHD RESOLUTION
USER MANUAL
1920x1080P@165Hz
FHD RESOLUTION

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
FHD RESOLUTION
27

CONTENTS
Product Description ................................................................................................................................................... 06
Installation and Connection .....................................................................................................................................07
Operation of Display....................................................................................................................................................08
Basic Troubleshooting ............................................................................................................................................... 09
Technical Specifications of Product ......................................................................................................................10
Instruction of base Installation................................................................................................................................ 10
PROFESSIONAL GAMING MONITOR

6
ICARUS SERIES
IMPORTANT SAFETY PRECAUTIONS
1. Please read all the instructions carefully before using this product.
2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid detergent or spraying detergent, but wipe it
with wet soft cloth. If it is still not clean, please use special detergent for LCD.
3. DO NOT use accessories not authorized by the manufacturer, otherwise they may incur danger.
4. When disconnecting the power cord of display or power adapter, always remember to hold the plug instead of pulling the wire to
unplug the power cord.
5. Keep the display away from water sources such as bath tub, washbasin, sink or washing machine. DO NOT place the display on
wet floor or near a swimming pool, or press LCD surface with fingers or hard objects.
6. The grooves and openings on the back and bottom of the shell are for ventilation purpose and also for guaranteeing the
reliability of the shell are for ventilation purpose and also for guaranteeing the reliability of the elements and preventing them from
overheating; in order to prevent the vents from blocking; DO NOT place the display on bed, sofa, carpet or other similar surfaces;
DO NOT place the display near to or on heat radiator or heater; DO NOT put the display into embedded device, unless it is provided
with adequate ventilating equipment.
7. Only the type of power source indicated on the nameplate applies to this display. If you have any questions on the type of power
source you use, please consult the dealer of the display or local administration of power supply.
8. For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin of this plug is for grounding,
and only applicable to socket that is correctly grounded. In case that your socket is not available for the plug, please contact
electrician to replace the socket.
9. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the display by yourself, but
request qualified maintenance staff to carry out.
10. In one of the following cases, please unplug the display or the power adapter and ask qualified maintenance staff for help:
a. The power cord or the plug is impaired or worn.
b. The display falls off or the shell is damaged.
c. The display is obviously abnormal.
11. Please place the display in a cool, dry and well ventilated place.
12. Store the display in temperature range of -10°C~60°C, beyond which the display may be damaged permanently.
1. Product Description
1.1 General
As a high-performance smart multi-frequency scanning display, it adopts active-matrix TFT-LED backlight liquid screen and is
controlled with MCU digital technology. With compact and thin appearance and build-in power supply, it is suitable for narrow
work space.
1.2 Packing list
Please check the following items in the packing case before installation:
• One LCD display(including the base)
• One HDMI cord, one power cord, one AC adaptor
• One User Manual
If any of above items is missing, please contact with the dealer.
Attention: Accessories shall be subject to the real configuration. Please keep all packing materials well for product transport in
the future.

7
ICARUS SERIES
2. Installation and Connection
2.1 Display installation
Installation instructions
• This machine should be installed adjacent to an easily pluggable AC power socket.
• For the sake of safety, we suggest that suitable wall-mounted bracket or base be used.
• In order to prevent injury, this machine shall be placed on a stable and level surface or fixed on a firm wall.
• For wall-mounting, please ask a professional to do so. Improper installation may cause instability of this machine.
• DO NOT place this machine in places with mechanical vibration.
• DO NOT place this machine in places where insects are accessible.
• DO NOT install this machine directly opposite to air-conditioner, otherwise its inner panel may be dewed and cause failure.
• DO NOT place this machine in places with strong electromagnetic field, otherwise it may be interfered by the electromagnetic
wave and get damaged.
Mounted on Wall Mounted on Base
Ventilation
• Please reserve some place as indicated in the figure around the display.
• Never cover the vents or insert any object into the shell.
• DO NOT place this machine in confined space such as book case or embedded closet, unless such space is well ventilated.
2.2 Signal line connection
Connect the signal line to output interfaces signal of DP/HDMI
signals of PC, and then connect the other end of the signal line
to the corresponding signal input port of the display.
2.3 Audio output
This machine supports earphone and external speaker
audio output.

8
ICARUS SERIES
3. Operation of Display
The OSD control buttons are shown as the figure. Models of the same product series are only different in button position
and panel pattern, please refer to the practical model.
3.1 Power indicator light
When the display is working normally, the blue indicator light is on; when it is in the energy saving state, the indicator light
blinks with red color; when the signals are sent again in the energy saving state, the machine will return to normal work; when
the machine is in the standby state, the red indicator light is on. As the display is still powered in the standby state, for the sake
of safety, the power cord should be unplugged when the display is not used.
3.2 Quickguide to rocker functions
Initial state: Enter the function menu:
Rocker Up Signal source input
Rocker Down Menu display
Rocker Left Brightness adjustment shortcut key
Rocker Right Volume adjustment shortcut key
Press Rocker Short press to start/display menu, press
and hold for 3s to turn off the machine
Rocker Up Move up
Rocker Down Move down
Rocker Left Back to previous menu/adjust value-
Rocker Right Enter next menu/adjust value+
Press Rocker Confirm/press and hold for 3s to
turn off the machine
The Rocker button is a comprehensive button that supports up, down, left, and right directions in one button. You can
directly enter the shortcut menu in different directions, short press the middle to enter the main menu, and press and hold
for 3 seconds to turn the screen on / off.
Rocker Up Rocker Down Rocker Le Rocker Right Press Rocker
3.3 Safety protection
When the video signals of PC exceeds the frequency range of the display, the horizontal and field synchronizing signals will
be shut down to protect the display. Then, you have to set the PC output frequency to an acceptable range so as to make the
display work normally.
Power Indicator Light
Rocker

9
ICARUS SERIES
Phenomenon Truobleshooting
Light out / power indicator lights is off Check whether the display and the socket are well connected to power, and
whether the diplay is in the shutdown mode.
Image blurring, over-large, over-small, etc. Enter the menu "Image Setting" and select "Auto Image Adjust" to automatically
adjust the display.
Image over dark Enter the menu "Brightness and Contrast" to adjust the brightness and
contrast of the display.
Display over heat Leave at leat 5cm of distance for ventilation around the display and do not
place articles on the display.
Dark / light spots when powering on
This is a normal phenomenon. It is due to the backlight illuminates unevenly
at the initial phase of powering on caused by temperature difference. The
backlight can illuminates normally after 20 minutes, and the the dark/light
spots will be corrected.
Image distortion, blinking, shaking Check computer setting, select the correct resolution and re-adjust the refresh
frequency.
Power off noise It is a normal phenomenon caused by display dischargeing in the process of
powering off.
4. Basic Troubleshooting
Panel size 27"
Optimal working resolution 1920x1080@165Hz
Power input DC 12V/4.5A
Product has been filed on China energy label website Yes
Blue-light filtering Support
Flicker-free Support
Requirements for working environment
Barometric pressure 86kpa~104kpa
Working temperature and humidity 0°C~40°C 20%~85%
Warehousing temperature and humidity -10°C~60°C 10%~90%
Packing size (W * H * T) and weight
Unpacked size (W * H * T) (with base) 616*464.8*251.8mm
Packing size (W * H * T) 705*167*532mm
Net weight 4.5 kg
Gross weight 7.1 kg
5. Technical Specifications of Product

10
ICARUS SERIES
Mode Power consumption
Normal working ≤54W
Standby ≤0.5W
5. Technical Specifications of Product
Power supply management system
Remarks
All technical specifications in this manual and external
packages are subject to change without further notice. In
case that there is subtle difference between this manual
and practical operation, please follow practical operation.
6. Instruction of base Installation
1. Assemble the base to the stand with 2 sets of M4 X 16mm screws as pictured. (Figure1)
Note: Going through aforesaid steps adversely can remove the base.
Note: Some of the contents in this manual may differ slightly from the final product, and the latter shall be referred to.
Figure1

www.newskillgaming.com
MORE INFORMATION AT