Next 749180 User manual

1
Produced in China for Next Retail Ltd.
749180-2014-V1
Actual product size
H111 x W101 x L202cm
IMPORTANT - RETAIN FOR FUTURE REFERENCE
SOPHIE ELLA BED
749180
Assembly instructions
NEED HELP?
With: Assembly instructions
Missing or damaged parts
Call: 0333 777 8999

2
SOPHIE ELLA BED
749180
Assembly instructions
BEFORE YOU START
Produced in China for Next Retail Ltd.
749180-2014-V1
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
Tools required
Missing parts
If you are missing any fixtures and fittings for your
product please contact our customer service team on
0333 777 8999 and they will be happy to arrange for a
replacement to be sent to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have
had the product for 28 days or less you may be offered a
replacement, refund or for a fully trained home service
technician to visit your home to assess the fault and
repair the product where possible. If you have had the
product for more than 28 days we will send an
independent home service technician to review and
repair the product where possible and recommend
further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
IMPORTANT - RETAIN FOR
FUTURE REFERENCE -
READ CAREFULLY.
This child’s bed conforms to BS8509:2008 + A1:2011
WARNINGS
WARNING: Do not place this child’s bed near heat sources,
windows and other furniture.
WARNING: Do not use this child’s bed if any part is broken, torn
or missing.
WARNING: Assembly by adult only.
WARNING: Once assembled this bed is not designed to be
disassembled and reassembled.
Children are likely to play, bounce, jump and climb on beds,
therefore the child’s bed should not be placed too close to other
furniture or windows, blind cords, curtain pulls or other strings or
cords and should be placed either tight to any wall or have a gap
of 300mm between the wall and the side of the bed.
This size of the mattress to be used with the child’s bed is 900mm
x1900mm.
This Child’s bed is intended for children above 4 years old.
WARNING: Not suitable for children under 4 years (junior beds
only).
Do’s
When you are ready to start, make sure that you have the right
tools and plenty of space.
Due to the size of the product we recommend that it is assembled
in the room intended for use.
Unwrap all packaging materials and place the components on a
clean surface to protect it from damage, We recommend that the
packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Please periodically check all fittings and re-tighten as necessary.
To clean your item, wipe with soft cloth slightly dampened with
water. Then buff with a dry clean cloth.
Routinely check that the fittings are secure and tighten any fittings
using the appropriate tools.
If any parts are missing please contact Next to obtain
replacements. Under no circumstances should missing parts or
hardware be substituted unless obtained from Next.
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
Do not stand or jump on this product.

3
SOPHIE ELLA BED
749180
Assembly instructions
GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require a replacement part.
Ref
Dimensions
Visual
Qty
1
99 x 105 cm
1
2
99 x 88 cm
1
3
9 x 193 cm
2
Produced in China for Next Retail Ltd.
749180-2014-V1
Ref
Dimensions
Visual
Qty
4
2 x 92 cm
2
5
3 x 7 cm
30
6
6 x 91 cm
15
7
3 x 225 cm
1
3
3
1
2
6
5
5
7
4
4

4
SOPHIE ELLA BED
749180
Assembly instructions
Fixtures and fittings supplied (actual size)
Ref
Dimensions
Qty
A
6 x 34 mm
4
B
8 x 30 mm
8
C
12.5 x 0.8 mm
8
D
17 x 1.5 mm
8
E
12.5 x 2 mm
8
F
11 x 6 mm
4
Fixtures and fittings supplied (not to scale)
Ref
Dimensions
Visual
Qty
G
77 x 65 mm
4
H
N/A
1
I
N/A
1
J
N/A
1
Produced in China for Next Retail Ltd.
749180-2014-V1
mm 10 20 30 40 50 60

5
SOPHIE ELLA BED
749180
Assembly instructions
Produced in China for Next Retail Ltd.
749180-2014-V1
1
Attach 4 x finials (G) to the ends of headboard (1)
and footboard (2), tighten by hand turning
clockwise.
G x 4
2
Attach headboard (1) and footboard (2) to 2 x
side rails (3) with 8 x bolts (B), 8 x spring
washers (E), 8 x plain washers(D) using allen
key (I) to tighten.
B x 8
D x 8
8 x 30 mm
1
2
G
E x 8
17 x 1.5mm
12.5 x 2 mm
D
E
3
3
B
D
E
B
83 x 65 mm

6
SOPHIE ELLA BED
749180
Assembly instructions
Produced in China for Next Retail Ltd.
749180-2014-V1
3
Attach 2 x support rails (4) to 2 x side rails
(3) with 4 x bolts (A), 8 x washers (C) and 4 x
nuts (E), using allen key (H) and spanner (J)
to tighten.
C x 8
A x 4
4
Insert 15 x slats (6) into the slat holes of
the strap assembly (7). Ensure the curve of
the slats are facing upwards.
6 x 34 mm
12.5 x 0.8 mm
F x 4
11 x 6 mm
A
4
4
C
C
F
7
6

7
SOPHIE ELLA BED
749180
Assembly instructions
Produced in China for Next Retail Ltd.
749180-2014-V1
5
1. Insert 30 x plastic caps (5) onto
both ends of each slat of the
wooden slat assembly (6). Ensure
the curve of the slats are facing
upwards with the pins in the caps
facing downwards.
2. Insert plastic end caps (5) of
the wooden slat assembly (6) in
to the holes in side rails (3).
Ensure the curves of the slats are
facing upwards.
3. Ensure the ends of the strap
are wrapped around support rails
(4).
6
6
5
5