Next 763744 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Do not use this item if any structual part is broken or missing.
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is partly or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Wall fixings are not included.
• The maximum load this these shelves can hold is 5kg.
PRODUCT INFORMATION
• Made from MDF with painted finish.
• Made in Poland.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Avoid keeping furniture in direct sunlight or close to a heat source as this can cause cracking, discolouration or
warping.
• Do not rub or scrub the surface when cleaning.
• Any spills should be removed with a soft clean, damp, cloth and dried immediately.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Do not use furniture polish.
763744 HEARTS & STARS BOOKCASE
Page 1 of 4 763744 bookcase 01

1. Insert 12 x cambolts (B) into side panels 1 & 2.
2. Insert 5 x camlocks (C) into back panels 3.
3. Insert 4 x camlocks (C) into shelves 5 (x2).
STEP ONE
FITTINGS
PARTS
Page 2 of 4 763744 bookcase 01

1. Attach back panel 3 to side panels 1 & 2 to shelves
5 (x2).
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
1. Insert 5 x cambolts (B) into bottom panel 4.
1. Attach bottom panel 4 to the assembled unit.
2. Tighten the camlocks (C) to lock cambolts (B) and
tighten with a screwdriver.
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
STEP TWO
STEP THREE
STEP FOUR
Page 3 of 4 763744 bookcase 01

1. Attach star (HA) o heart r (HB) or football (HC) to
back panel using and 1 x wooden dowel (HD) and 1 x
screw (HF) and tighten with a screwdriver.
1. Attach wall strap (QA) to the assembled unit using 1
x washer (QB) and 1 x screw (QC) and tighten with a
screwdriver.
WARNING: Always ensure the area to be drilled is free
from hidden electrical wires, water and gas pipes.
NOTE: Wall fixings are not included, please source
suitable fixings for your wall type. If in doubt please
consult a qualified trades person.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP FIVE
STEP SIX
Page 4 of 4 763744 bookcase 01