Next 853213 User manual

Tools Needed
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: [phone]
• A minimum of 2 persons is required to assemble this product.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Carefully check that you have all parts before beginning assembly.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Do not rub or scrub the surface when cleaning.
• Made in China.
• The maximum load this cabinet shelves can hold is 5 kg.
• We would recommend that the following methods to be used to hang the cabinet. NB - Screws & Raw plugs for
the wall are not included.
• Made from MDF with painted finish & mirrored glass doors.
• For general cleaning, periodically dust with a soft cloth.
CARE INSTRUCTIONS
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
PRODUCT INFORMATION
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Wall fixings must be used for stability on this item and for safety reason the cabinet should be left freestanding.
• We recommend that the packaging is used to protect the surfaces during assembly.
853213 CRYSTALLE CORNER CABINET
Page 1 of 5

1. Insert 4 x wooden dowels (A) into bottom panel
3.
2. Attach side panels 2 (both L&R) to bottom
panel 3 with 4 x screws (B) and tighten with a
screwdriver.
STEP ONE
FITTINGS
•BS 7449: 1991.
•Batch No.04/2013
•This product contains 4mm glass that does not conform to BS 6206. If the glass is chipped or broken replace with
glass of the type described. Consult the manufacturer, retailer or agent with regard to obtaining a manufacturing
specification and shape for replacement glass quoting the model number and batch number or date of manufacture.
•This item contains glass. Please handle with extreme care.
GLASS INFORMATION
PARTS
Page 2 of 5

1. Insert 4 x wooden dowels (A) into top panel 1.
2. Attach top panel 1 to the assembled unit with 4
x screws (B) and tighten with a screwdriver.
1. Attach back panel 6 to the assembled unit with
10 x screws (C) and tighten.
1. Insert 1 x metal sleeves (K) into 1 x plastic
washers (J) .
STEP TWO
STEP THREE
STEP FOUR
Page 3 of 5

1. Attach 2 x hinges (D) to door panel 5 with 4
screws (E) and tighten with a screwdriver.
2. Attach 1 x handle (H) to door panel 5 with 1 x
plastic washers (J) , 1x metal sleeve (K) and 1 x
bolt (G), tighten with a screwdriver.
1. Attach door panel 5 to the assembled unit with
4 x screws (E) and tighten.
2. Attach 8 x shelf supporters (F) to the
assembled unit. Ensure that the four supports for
shelf are all at the same height. Note that the
shelf position is adjustable.
3. Place the adjustable shelf panels 4 (x2) onto
the shelf supports (F).
Note: The gaps between the door and frame can
be changed by making adjustments to the hinges
with a screwdriver. Refer to adjustment
diagrams.
Laterally (Side to Side)
Front to back
Vertically ( up and down)
STEP FOUR
STEP FIVE
Page 4 of 5

1. Use pencil to mark through predrilled hole on
side panel.
1. Use power tool drill through the pencil mark.
1. Attach the assembled unit to the wall with 4 x
screws, tighted with a screwdriver.
Warning: Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
NB: Wall fixings are not incuded, please source
suitable fixings for your wall type. If in doubt
please consult a qualified trades person.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP EIGHT
STEP SIX
STEP SEVEN
Pencil
Pencil
Pencil
Pencil
Page 5 of 5