HAVANA PANEL DINING TABLE
876703
Assembly instructions
1Produced in Indonesia for Next Retail Ltd.
Version 1
Time to assemble
Tools required
not supplied not supplied
PH2
Number of people required to assemble
Missing parts
Home service technicians
Youcanwritetousat
To view our full furniture range please visit www.next.co.uk
One person to assemble the unit and one person to lift the unit
into position
1.5 hour
BEFORE YOU START
If you are missing any fixtures and fittings for your product.
Please contact our customer service team on
and they will be happy to arrange for a replacement to be sent
to you free of charge.
0333 777 8999
If you have a fault with your product. Please contact our customer
service team on . If you have had the product for 28
days or less you may be offered a replecement, refund or for a fully
trained home service technician to visit your home to assess the
fault and repair the product where possible. If you have had the
product for more than 28 days we will send an independant home
service technician to review and repair the product where possible
and recommend further action.
0333 777 8999
Home Customer Services
Next Retail Ltd,
Destord Road,
Leicester,
LE19 4AT
Warnings
Important: Retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away
from construction area.
This product should only be used on firm level ground.
Please periodically check all fittings and re-tighten as necessary.
Do's
Dont's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the right
tools. Plenty of space and a clean, dry area for assembly.
Carefully check that you have all parts listed before beginning
assembly.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings
fully tightened before use.
Wood will mellow and change colour over time, we recommend that
ornaments and items placed on the surface are moved regularly for
the first few months to prevent uneven mellowing.
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster.
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause cracking of the wood and deterioration of the
colour.
Unwrap all packaging materials and place the components on top
of the carton box or on a clean floor to protect it from damage.
Please do not sit or stand on your furniture.
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage, We recommend that
the packaging is used to protect the surfaces during assembly.
Wipe occasionally with a soft cloth slightly dampened with water.
Then buff with a dry clean soft cloth.
