Next MIDDLETON 651308 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Do not use furniture polish.
• Use a furniture oil periodically to maintain the finish and prevent the oil from drying out.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Do not use this item if any structual part is broken or missing.
CARE INSTRUCTIONS
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the
lacquer finish.
• Use non-silicone beeswax to maintain the shine.
• Do not rub or scrub the surface when cleaning.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless
the item is found to be faulty. Should you need to return the unassembled product, please repack in
the original packaging.
IMPORTANT
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-
step instructions.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• For general cleaning, periodically dust with a soft cloth.
PRODUCT INFORMATION
• Made from solid birch with dark finish.
• Natural features ensure that each piece is individual. Every effort is made to ensure colour
continuity between pieces, however this is a natural product, slight colour variations and natural
grain markings may occur.
• Made in LITHUANIA
651308 MIDDLETON EXTENDING DINING
TABLE
Page 1 of 5

1. Please assemble legs while
table top is in packaging to
prevent scratches and damage
to surface.
2. Attach leg to table by placing
bolt through the bracket &
securing with washer (A),
locking washer (B) & nut (C).
Ensure that the nut is secure.
Repeat for all four legs.
3. Do not turn to upright position
by pivoting on table legs
(see diagram below).
PARTS
STEP ONE
FITTINGS
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to
prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• We recommend that the extending dining table is left fully extended and uncovered for the first few
months so that the natural mellowing process occurs evenly across the table top.
Page 2 of 5

1. Ensure clips are secure
before turning table
2. Lift the table out of the
packaging and turn to upright
position. Two person lift
required (see diagram below).
1. To open table undo clips
under table.
2. With 2 people holding
the ends of the table lift
and pull apart at the
same time.
3. Insert leaf 2 carefully and
close table.
1. Fasten clips to
secure before using.
STEP FOUR
STEP TWO
STEP THREE
Page 3 of 5

Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 4 of 5

Page 5 of 5