Next 999995-21 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
FARRINGDON KING BED
999995-21-2016-V1
Produced in China for Next Retail Ltd.
H115 x W165 x D214cm
IMPORTANT ─RETAIN FOR FUTURE REFERENCE
Assembly instructions
999995-21
Actual product size

not supplied
PH2
1
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our customer service team on 0333 777 8999. If you have had the product for
28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit your home to
assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an
independant home service technician to review and repair the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product, please contact our customer service team on 0333 777 8999, and they
will be happy to arrange for a replacement to be sent to you free of charge.
Tools required
Number of people required to assemble
Two people are required to assemble this item.
BEFORE YOU START
Assembly instructions
Time to assemble
15 minutes

Components supplied. Please use this guide if you require replacement parts.
QtyVisual
Dimensions
Ref Ctn
11
15
6
7
2
204x7cm
195x76cm
26x4cm 3
2
165x114cm
Dimensions Visual Qty CtnRef
1
2
1
1
2 161x40cm 1 1
3 202x14cm 12 8 152x1cm 12
124 202x14cm
1
2
3
4
5
6
6
6
7
7
8
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions
GETTING TO KNOW YOUR PRODUCT

10 1101009080706050403020
mm
3
Fixtures and fittings
supplied (actual size)
DimensionsRef Qty
A
Fixtures and fittings supplied(not to scale)
2
Ref Dimensions QtyVisual
C
* Extra Fittings included
in case of loss or damage
*Extra Fittings
4 x 20mm 2 1
5mm
B 8 x 95mm 2 1
*Extra Fittings
1
M8 x 16mm
DM8mm 2 1
E1
F218x20mm
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions

4
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions
1
2
3
4
3
4

5
6
5
D x 2 M8mm
M8x16mm
C x 2
8x95mm
B x 2
8x20mm
F x 2
5mm
E x 1
B
D
C
F
E
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions
5
6
6
6

not supplied
PH2
6
A
4x20mm
A x 2
8
1
2
5
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions

5mm
IMPORTANT
Once the feet have been assembled and attached, they should be adjusted to ensure
they do not touch the floor, (5mm above the floor) to allow for movement once the
mattress is placed on the bed frame.
It is important to note that when moving the bed that it is not dragged into its new
position to prevent the possibility of these feet being twisted or angled to one side,
which could lead to the collapse of the centre of the bed.
To move the bed, remove the mattress and lift the bed into its new position to avoid
damage.
Ensure the feet are at 90 to the floor before replacing the mattress.
7
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions
7
7

Actual product size
H115 x W165 x D214cm
8
1520mm
395mm
81mm
2020mm
255mm
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Assembly instructions

9
999995-21-2016-V1
Produced in China for Next Retail Ltd.
999995-21
FARRINGDON KING BED
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Assembly instructions
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct sunlight as this can cause deterioration of the colour.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to protect it from damage.
Do’s
We suggest you spend a short time reading through this leaflet before you start.
When you are ready to start, make sure that you have the right tools and plenty of space.
Unwrap all packaging materials and place the components on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning assembly
Due to the size of the product we recommend that it is assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
FARRINGDON KING BED
999995-21-2016-V1
Produced in China for Next Retail Ltd.
H115 x W165 x D214cm
IMPORTANT ─RETAIN FOR FUTURE REFERENCE
Assembly instructions
999995-21
Actual product size