0.5 hour
PH2
not suppliednot supplied
If you are missing any fixtures and fittings for your product
product.
IDAHO MIRROR
679714
Assembly instructions
Actual product size
IMPORTANT ─RETAIN FOR FUTURE REFERENCE
H80 x W110 x D4cm
Produced in China for Next Retail Ltd.
Version 1
IDAHO MIRROR
Assembly instructions
679714
1
Home service technicians
an independant home service technician to review and repair
leaflet before you start.
any hidden electrical wires, water and gas pipes.
Date of manufacture: 20/04/2014
Home Customer Services
Contract number: IM8430326
Please use suitable wall fixings for your wall type. Wall
When you are ready to start, make sure that you have the please contact our customer service team on
To View our full furniture range please visit www.next.co.uk
Name and address: Next Retail Ltd. LE19 4AT
BS7449:1991
Not suitable for use in bathrooms.
fixings are not included.
LE19 4AT
the product where possible and recommend further action.
Leicester,
Desford Road,
Next Retail Ltd,
You can write to us at
refund or for a fully trained home service technician to visit your
to you free of charge.
Missing parts
home to assess the fault and repair the product where possible.
if you have had the product for more than 28 days we will send
0333 777 8999
assembly of your product.
Tips
Time to assemble
Two persons are required to assemble this item.
Number of people required
and they will be happy to arrange for a replacement to be sent
Tools required
Look out for the symbol throughout this manual. Wherever
bleach or damage the product.
Warnings
Check all screws or bolts are tightened and inspect regularly.
Do not overtighten screws or bolts.
Do’s
you see it we will have a handy tip to help you with the
use solvent based cleaners or detergents as they can
Retain these instructions for future reference.
Don’ts
Important:
Check the pack and make sure you have all the parts listed.
BEFORE YOU START
To clean wipe with a sponge and warm soapy water. Do not
scratching.
Ensure that this product is fully assembled as illustrated
top of the carton box or on a clean floor to prevent it from
Do not tilt or stand on the product.
Keep fittings out of children’s reach and keep children we;;
away from the construction area.
before use.
Unwrap all packaging materials and place the components on
We suggest you spend a short time reading through this
right tools, plenty of space and a clean, dry area for
worn.
assembly.
Do not use this product if parts are missing, damaged or
This product should only be used on firm level walls.
Always ensure intended wall area to be drilled is free from
If you have a fault with your product please contact our
customer service team on 0333 777 8999. if you have had the
product for 28 days or less you may be offered a replacement,
Nominal thickness of glass: 4mm, Annealed glass does not
conform to BS6206. If a glass component is chipped or
broken replace with
glass of the type described on the label at the back of
Never use scourers, abrasives or chemical cleaners.
