Next CORSICA NEST OF TABLES User manual

Tools Needed
Helpline
If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel:
0333 777 8999
ASSEMBLY INSTRUCTIONS
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
CORSICA NEST OF TABLES
CORSICA NEST OF TABLESCORSICA NEST OF TABLES
CORSICA NEST OF TABLES
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Made from hollow board & Honeycomb board and particle board with a wood effect foil finish.
• Made in China.
• Do not use furniture polish.
PRODUCT INFORMATION
CARE INSTRUCTIONS
• Do not rub or scrub the surface when cleaning.
• For general cleaning, periodically dust with a soft cloth.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Do not put hot dishes directly on the surfaces of the item.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Carefully check that you have all parts before beginning assembly.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
Page 1 of 5

FITTINGS
PARTS
1.Insert 4 x bolts (I) into nuts fixed on panels 2(x2) & 3(x2)
and turn bolts (I) clockwise until tight by hands.
2.Insert 8x cambolts (C) into panels 2(x2) & 3(x2) and
tighten with a screwdriver.
STEP ONE
Page 2 of 5

1. Glue and insert 4 x wooden dowels (A) into
panels 5 (X2)
2. Attach panels 2 (X2) & 3 (X2) to panels 5 (X2)
1.Attach panels 4 (x2) to panel 1 with 2×screws (F)
and tighten with an Allen key (E).
STEP TWO
STEP THREE
1. Glue and insert 12 x wooden dowels (A) into
panels 2(x2) & 3(x2)
2.Attach the assembled leg frames to panels 1 & 4 (x2).
3.Slot 4 X metal pieces (J) onto bolts (I),and thread 4 X
springs (K) onto blots (I),then screw 4 X metal
nuts (H) with spanner (G) until tight.
4.Insert 4×camlocks (D) into panel 1 and tighten with a
screwdriver.
Ensure the arrow indicator is pointing towards
the panel edge before tightening with a
screwdriver.
STEP FOUR
Page 3 of 5

1.Tighten the panels 5(x2) to panel 1 with
2×screws (F) using an Allen key (E).
2.Turn over the product .
1.Insert 4 x bolts (I) into nuts fixed on panels 7 , 8 , 9 & 10
and turn bolts (I) clockwise until tight by hand.
2.Insert 4x cambolts (C) into 8 & 9 and tighten with a
screwdriver.
3.Insert 2x cambolts (C) into 7 & 10 and tighten with a
screwdriver.
STEP SIX
STEP FIVE
1. Glue and insert 4 x wooden dowels (A) into
panels 12 (X2)
2. Attach panels 7 & 8 to panel 12
3. Attach panels 9 & 10 to panel 12
STEP SEVEN
Page 4 of 5

1.Attach panel 11 to panel 6 with 1×screws (F)
and tighten with an Allen key (E).
1. Glue and insert 10 x wooden dowels (A) into
panels 11 & 6
2.Attach the assembled leg frames to panels 11 & 6.
3.Slot 4 X metal pieces (J) onto bolts (I),and thread 4 X
springs (K) onto blots (I),then screw 4 X metal
nuts (H) with spanner (G) until tight.
3.Insert 2×camlocks (D) into panel 6 and tightening with a
screwdriver.
Ensure the arrow indicator is pointing towards
the panel edge before tightening with a
screwdriver.
STEP EIGHT
STEP NINE
1.Tighten the panels 12(x2) to panel 6 with
2×screws (F) using an Allen key (E).
2.Carefully turn over the product .
1. Slide small table under the large table
STEP ELEVEN
STEP TEN
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 5 of 5