Next CLARENDON 802672 User manual

Produced in China for Next Retail Ltd.
802672-2014-V1
CLARENDON DRESSING TABLE MIRROR
H54 x W95 x D17cm
IMPORTANT ņRETAIN FOR FUTURE REFERENCE
802672
Assembly instructions
Actual product size
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999

0.5 hour
not supplied
PH
802672-2014-V1
Produced in China for Next Retail Ltd.
802672
CLARENDON DRESSING TABLE MIRROR
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Tools required
Time to assemble
Number of people required to assemble
Two persons are required to assemble this item.
BEFORE YOU START
Assembly instructions
Warnings
Important: Retain these instructions for future reference.
Keep fittings out of children’s reach and keep children we;
away from the construction area.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to prevent it from
scratching.
This product should only be used on firm level walls.
Always ensure intended wall area to be drilled is free from
any hidden electrical wires, water and gas pipes.
Please use suitable wall fixings for your wall type.
Wall fixings are not included.
Not suitable for use in bathrooms.
BS7449:1991
Name and address: Next Retail Ltd. LE19 4AT
Nominal thickness of glass: 4mm, Annealed glass does not
conform to BS6206. If a glass component is chipped or
broken replace with glass of the type described on the label
at the back of product.
Do’s
We suggest you spend a short time reading through this
leaflet before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for
assembly.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated
before use.
Check all screws or bolts are tightened and inspect regularly.
To clean wipe with a sponge and warm soapy water. Do not
use solvent based cleaners or detergents as they can
bleach or damage the product.
Don’ts
Do not overtighten screws or bolts.
Do not tilt or stand on the product.
Do not use this product if parts are missing, damaged or
worn.
Never use scourers, abrasives or chemical cleaners.

Assembly instructions
802672-2014-V1
802672
Produced in China for Next Retail Ltd.
CLARENDON DRESSING TABLE MIRROR
GETTING TO KNOW YOUR PRODUCT
1
95 x 54cm
2
Components supplied. Please use this guide if you require replacement parts.
11
Visual
1
CtnRef Dimensions Qty

130
120110100908070605040302010
mm
Ref
3
Fixtures and fittings supplied(not to scale)
supplied (actual size)
DimensionsRef Qty
4
3.5 x 14mm
BZ
AG
CA
Visual QtyDimensions
Fixtures and fittings
5mm
2
1
Produced in China for Next Retail Ltd.
802672-2014-V1
CLARENDON DRESSING TABLE MIRROR
802672
Assembly instructions

not supplied
PH
AG x 4
4
3.5 x 14mm
BZ x 2
CLARENDON DRESSING TABLE MIRROR
802672-2014-V1
802672
Produced in China for Next Retail Ltd.
Assembly instructions
1
AG
AGBZ

Produced in China for Next Retail Ltd.
802672-2014-V1
802672
CLARENDON DRESSING TABLE MIRROR
Assembly instructions
use allen key (CA)
Loosen the screws of the mirror sidesPull out the cork of the mirror sides
Tighten the screws of the mirror sides
Adjusted mirror to the proper angle
Plug back the cork
CA x 1
5
5mm
CA
CA