Next 141952 User manual

141952 MODULAR BLACK DOUBLE
1 of 14 MODULAR P480MRK1
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORTANT
• We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly .
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly .
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Helpline
If you have any problems with this
product or require any replacement
ttings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer nish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately .
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the oor as this will cause damage to the joints.
All assembly xings should always be tightened properly and periodically check all xings and
tighten if necessary.
• The nish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
3.0 M x 1,0 M
1.5 hrs
DESCRIPTION:
Assembly
Instruction
MODULAR
141952 BLACK DOUBLE
2 of 14 MODULAR P480MRK1
1010 mm
2070 mm
520 mm
1010 mm
2070 mm
520 mm

PARTS LIST
NO PART LIST QTY
.
DESCRIPTION:
Assembly
Instruction
3 of 14 MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE
NO PART LIST QTY
.
1
2
7
6
6
5
4
3
8
8
(1) RIGHT SIDE PANEL 1
(2) LEFT SIDE PANEL 1
(3) TOP PANEL 1
(4) HORIZONTAL DIVIDER 1
(5) BOTTOM PANEL 1
(6) PLINTH 2
(7) HORIZONTAL SLAT 1
(8) BACK PANEL 2

HARDWARE LIST
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
B1
2x
FEET
B
BAG 2 BAG 2
BAG 1
4+4x
3,5x13mm
SCREW
DO NOT MIX CONTENT OF HARDWARE BOXES
4 of 14
16x
CAM BOLT
F
++
16x
CAM LOCK
D
22x
8x28mm
DOWEL
E
BAG 1
BAG 1 BAG 1
Ø5x39mm Ø15x12mm
I
J
10x
Ø15mm
CAM COVER
BAG 1
K
2x
Ø10mm
COVER
BAG 2
1x
Ø10mm
ALLAN WRENCH
BAG 2
4x
HINGE PLATE
1:2
C
8x
6,3x13mm
SCREW
C1
4x 4x
AA1
BAG 1 BAG 1
HINGES PLATE “C” FOR FIXING DOORS
ARE INCLUDED WITH THE DOORS.
G
16x
PLASTIC
SUPPORT
BAG 1
4x
2x 3,5x13mm
90x40x15mm
SCREW
BAG 3 BAG 3
MOUNTING BRACKET
M
L
1:2
WHEN CARCASS IS ASSEMBLED PLEASE REFER TO FURTHER
INSTRUCTIONS INCLUDED WITH THE DOORS
MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE
3,0x13mm
SCREW
CLOTHES BAR
SUPPORT
2x
L=966mm
CLOTHES BAR
H
1:2

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
5 of 14 MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE

SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
DESCRIPTION:
Assembly
Instruction
6 of 14 MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE

DESCRIPTION:
1
Assembly
Instruction
7 of 14
front
D
D
14x
B1 C1
C1
C
C
2x 4x 8x
4x
B
4x 4x
AA1
Type:Left
C
front
B1
B
2
2
C1
C
Type:Right
C
B1
B
1
D
MODULAR P480MRK1
HINGES PLATE “C” FOR FIXING DOORS
ARE INCLUDED WITH THE DOORS.
MODULAR
141952 BLACK DOUBLE
A1
A1

DESCRIPTION:
Assembly
Instruction
2
3
++
++
8x
6x
F
F
8x
12x
E
E
++
++
++
++
++
++
++
++
F
E
++
34
++
++
++
++
F
E
++
8 of 14
++
++
5
E
6
6
MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE
FRONT
D
2x
D

DESCRIPTION:
Assembly
Instruction
4
5
++
2x
F
2x
E
F
E
++
++
++
9 of 14
5
6
6
7
MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE
FRONT
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
1/2 TURN
CLOCKWISE.

DESCRIPTION:
Assembly
Instruction
10 of 14
6
7
++
++
1/2 TURN
CLOCKWISE.
++
++
1/2 TURN
CLOCKWISE.
++
++
++
++
++
++
++
++
++
++
++
6
6
6
6
5
5
1
1
3
3
MODULAR P480MRK1
MODULAR
141952 BLACK DOUBLE
++
++
++
++
++
++
++
++
++
++
4
4
7
8
++
++
2