Next CUBE LONG JOHN User manual

Tools Needed
Helpline
If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel:
0333 777 8999
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
CUBE LONG JOHN
by-step instructions.
• Made from hollow board, honeycomb board with a wood effect finish.
CARE INSTRUCTIONS
• Do not use furniture polish.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
PRODUCT INFORMATION
• Made in China
• For general cleaning, periodically dust with a soft cloth.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not put hot dishes directly on the surfaces of the item.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Do not rub or scrub the surface when cleaning.
Page 1 of 4

1.Insert 4× bolts (K) into nuts fixed on panel (1) and
turn bolts (K) clockwise until tight by hands.
PARTS
STEP ONE
FITTINGS
1.Glue 6×wooden dowels (A) into panel 1.
2 Attach panels 2(X2) to panel (1)
3.Cover 4 x metal pieces (L) onto 4 x bolts (K)
and then screw 4 x metal nuts (I) with
spanner (J) until tight.
STEP TWO
Page 2 of 4

1.Use 4 x stickers (C) to cover the holes on
panels 2(X2)
1.Insert 4 x cambolts (E) into panel 3 and tighten
with a screwdriver.
STEP FOUR
STEP THREE
X2
1. Glue and insert 4 x wooden dowels (A) into
panel 3.
2. Attach panels 5 (x2) to panel 1.
3. Insert 4 x camlocks (D) into panels 5 (x2).
Ensure the arrow indicators are pointing towards
the panel edges before tightening with a
screwdriver.
X2
STEP FIVE
Page 3 of 4

1.Attach panel 4 to panels 5(x2) with 6 X screws (G)
using an Allen key (F) to tighten.
X2
1.Use 4 x stickers (M) to cover the camlock holes
on panels 5 (x2).
2.Please repeat STEP FOUR to SEVEN to assemble
the other product.
STEP SEVEN
STEP SIX
X2
1.The assembled product as shown
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP EIGHT
Page 4 of 4