Next HIDEAWAY DINING SET User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Carefully check that you have all parts before beginning assembly.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
PRODUCT INFORMATION
• Made in China
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Made with either a high gloss finish or ash veneer with a lacquer finish.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Do not put hot dishes directly on the surfaces of the item.
• Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between pieces,
however this is a natural product, slight colour variations and natural grain markings may occur.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
HIDEAWAY DINING SET (TABLE)
Page 1 of 4

washer (K). And tighten with
using 1 x bolt (C) and 1 x
PARTS
1 . Rest table frame 2 upside
FITTINGS
STEP ONE
down and attach crossbar 3
frame 2, using 1 x bolt (C)
and 1 x washer (K). And tighten
with an allen key (H).
an allen key (H).
2 . Attach cross bar 4 to table
Page 2 of 4

1. Attach 2 x legs 5 to frame 2.
1. Insert 4 x wooden dowels (D)
STEP TWO
and 4 x bolts (A) into 2 x legs 5.
to the table (1)
2. Fix the table frame with 8 x
bolts (B). And tighten with an
1. Align the complete table frame
allen key (H).
STEP THREE
STEP FIVE
STEP FOUR
1. Fix the legs by using 4 x half
moon washers (I) and 4 x nut
(E). And tighten with a
spanner (F).
Page 3 of 4

Two Persons Required
STEP SIX
1. Attach 4 x adjustable plastic
over. Ensure to sue two
people complete this step.
feet (L) to the prefixed nuts at
the bottom of each legs.
2. Gently turn the complete table
Do use two people to turn the Table.
Do not turn the table by pivoting it on its legs.
Do not lift the table by the legs.
NEXT Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT
OK
Page 4 of 4