Next MATSON 127638 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely c ertain
before yo u pu t it all together.
So, let’s quickl y run throug h these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose Fittings and Fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose Fixtures and Fittings
straight into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

MATSON FLIP BED
Assembly instructions
127638/433420/790961
1
I
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Need Help?
With: Assembly Instructions
Missing or danaged parts
CCALL: 0333 777 8999
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
Actual product size
SMALL DOUBLE: W131 X L202.5 X H101cm
DOUBLE: W145.5cm X L202.5cm X H101cm
KING: W161 X L212.5 X H101cm
Fabric
100%polyester
Content
Item No.
127638
100%polyester
433420
790961
Silver Grey
Petrol Blue
100%polyester
Rose

2
Produced in China for Next Retail Ltd.
356942/622188/852540/853658-2019-V1.
Warnings Don'ts
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only by used on firm ,level ground.
Only use the bed frame with recommended min/max mattress
weight.
Please periodically check all fittings and re-tighten as
necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Operate bed frame without a mattress in position.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
BEFORE YOU START
Number of people required to assemble
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
Keep objects clear from any moving components.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de-laminate.
Take care when lifting the mattress frame.
To clean your item, please use a vacuum or lightly brush clean.
Two people are required to assemble this item
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
not supplied
PH2 X2
Tools required 30min
TO NO TIME
MATSON FLIP BED
Assembly instructions
127638/433420/790961

Ref
3
1
Dimensions Visal Qty Ctn
2
4
1
2
3
5
6
Ref Dimensions Visal Qty Ctn
3
Headboard
Footboard
LH Side Rail
RH Side Rail
4
5
6
7
8
11
9
10
7
8
10
11
9
1
1
1
1
1
1
1
1
1
2
2
Non
Woven Fabric
Metal
Frame Base
Metal Horizontal
Support Bar
Center
Support Bar
Base Support
Mattress Stopper
1
2
2
3
3
1
3
3
3
3
3
Components supplied. Please use this guide if you require replacement parts.
GETTING TO KNOW YOUR PRODUCT
Corner Brackets
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961

4
A
10 20 30 40 50 60 70 80 90 100 110
Ref Qty
Dimensions
2
B24
C
D
M5
M8x25
M8
M8x17
26
38
E
F
G
1
8M8x50
6M8
M8
H
J
K
2
2
4
M8
Ø4x45
55x28
Spare
N/A
N/A
N/A
2
2
2
Fixtures and fittings supplied (actual size)
1
1
1
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961
1

5
1
2
Bx8 M8x25mm Cx8 M8 Dx8 M8x17mm
11B
C
D
1
2
4
3
2
1
3
2
4
2
B
C
D
4
3
10mm
10mm
90%
Ax2 M5
A
A
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961

6
3
4
Ax2 M5
Bx8 M8x25mm Cx8 M8 Dx10 M8x17mm
Bx4 M8x25mm Cx4 M8 Dx4 M8x17mm
A
Fx2 M8x50mm
1
3
4
1
4
3
B
C
D
3
4
2
2
2
4
3
FD
B
9
C
D
11
90%
90%
Ax2 M5
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961

7
5
6
PH2
not supplied
Kx4 M4x45mm
5
1
2
3
4
3
4
4
3
8
K
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961

8
7
8
Cx4 M8 Dx8 M8x17mm Ex1 M14 Gx4 M8
Fx4 M8x50mm
6
6
6
B
D
J
6
6
Ax2 M5
D
C
G
D
F
A
E3
4
Bx4 M8x25mm Dx4 M8x17mm Jx2 55x28mm
Ax2 M5
80%
Do not fully tighten
at this stage.
！
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961

SMALL GAP
9
9
10
Hx2 M8
E
H
3
4
Cx2 M8 Dx4 M8x17mm Ex1 M14 Gx2 M8
Fx2 M8x50mm
Ax2 M5
3
4
Ex1 M14
6
7
A
E
D
C
G
D
F
100%
Fully tighten all fittings.
！
Produced in China for Next Retail Ltd.
127638/433420/790961-2019-V1.
MATSON FLIP BED
Assembly instructions
127638/433420/790961