Next QUINN D29307 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely c ertain
before yo u pu t it all together.
So, let’s quickl y run throug h these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose Fittings and Fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose Fixtures and Fittings
straight into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

1
I
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Need Help?
With: Assembly Instructions
Missing or danaged parts
CCALL: 0333 777 8999
Produced in China for Next Retail Ltd.
QUINN BED
Assembly instructions
D29307-2023-V1.
D29307
Fabric
100%polyester
Content
Item No.
D29307 Mid Grey
Actual product size
DOUBLE: W156 X L213 X H100.5cm
KING: W171 X L223 X H100.5cm

2
Warnings Don'ts
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only by used on firm ,level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
BEFORE YOU START
Number of people required to assemble
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
When moving your assembled bed. It is best to lift the bed
and never to drag it. Please check that the centre support
rail is securely fixed in place.
When adjusting the support legs ensure that the foot is set
5mm from the floor surface without the mattress in place.
When in use the legs will create the required support for
the product.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de-laminate.
To clean your item, please use a vacuum or lightly brush clean.
Two people are required to assemble this item
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
Time to assemble : 30 minutes
not supplied
Tools required
EASY
BUILD
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.

1
2
3
6
5
6
7
Ref
3
Dimensions Visal Qty Ctn Ref Dimensions Visal Qty Ctn
Components supplied. Please use this guide if you require replacement parts.
GETTING TO KNOW YOUR PRODUCT
1
2
3
4
5
6
7
8
1
1
1
2
1
2
2
Headboard
Footboard
LH Side Rail
Slats
Centre
Support Bar
Centre Support
Bar Legs
Headboard Legs
1
1
2
3
3
3
2
7
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.
4
9
9
8
8
1
RH Side Rail 2 9 2Footboard Legs 3

4
A
10 20 30 40 50 60 70 80 90 100 110
Ref Qty
Dimensions
2
B16
C
D
M5
M8x25
M8
M8x17
14
18
E
F
G
1
2M8x40
2M8
Dimensions
Fixtures and fittings supplied (actual size)
Fixtures and fittings supplied (not to scale)
Ref Qty Spare Dimensions Ref Qty Spare
H 3 1 J 1
Slat pin
Slat centre
cap
2
2
Spare
N/A
2
M14
N/A
1
1
8
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.

Bx4 M8x25mm Cx6 M8 Dx6 M8x17mm Ax2 M5 Fx1 M14 Ex2 M8
B
C
D
8
5
1
2
Ensure bed frame is square
!
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.
Bx8 M8x25mm Dx8 M8x17mm Ax2 M5 Cx8 M8
INNER
B
C
D
1
4
2
4
BCD
1
2
4
3
1
2
3
4
9
2
4
INNER
C
F
E
INNER
9
2
4
D
9
9
INNER
INNER
INNER
8
1
8
INNER
8

6
3
4
5mm
Bx4 M8x25mm Dx4 M8x17mm
1
1
2
2
Fx2 M8x40mm
F
6
5
56
6
Ax2 M5 Hx3
F
F
H
H
H
100%
Ax2 M5
6
H
5
Ensure bed frame is square
!
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.
B
D
5

J
J
J
J
J
J
H
H
7
5
SLIDE IN
7
HJ
7
7
Double
6
Double
SLIDE IN
HJKing
Jx6
King
Jx8
J
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.
H
J
JJ
J
J
JJ
J
H
H
H
7
7
7
7
7

8
Overall Dimensions (WxLxH cm) Internal Dimensions (WxL cm)
DOUBLE: 156 x 213 x 100.5/28
KING: 171 x 223 x 100.5/28
137.5 x 192
152.5 x 202
16
100.5
W
L
28
14.5
5.5
5.5
QUINN BED
Assembly instructions
D29307
Produced in China for Next Retail Ltd.
D29307-2023-V1.
13.5