Next MONTEGO 804781 User manual

673886-2014-V1
Produced in China for Next Retail Ltd.
IMPORTANT─RETAIN FOR FUTURE REFERENCE
Assembly instructions
804781
MONTEGO RECTANGULAR TABLE
Actual product size
Need Help?
With: Assemblyinstructions
Missing or damagedparts
CALL: 0333 777 8999
H71 x W142 xD91cm

744563
MONTEGO RECTANGULAR TABLE
Assembly instructions
1
Produced in China for Next Retail Ltd.
You can write to us at
HomeCustomer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product
please contactour customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Time to assemble
Number of people required to assemble
Two persons are required to assemble this item.
Don’ts
BEFORE YOU START
0.5 hours
Warnings
Do’s
673886-2014-V1
For domestic and outdoor use only.
We suggest you retain these instructions for future reference
Keep fittings out of children’s reach and keep children well
away from construction area.
Please periodically check all fittings and re-tighten as necessary.
Please do not sit or stand on your table.
Unwrap all packaging materials and place the components on
top of the carton box or on a clean floor to protect it from
damage.
This product should only be used on firm, level ground. Make
sure the legs remain in contact with the ground.
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the right
tools and plenty of space.
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly
Carefully check that you have all the parts before beginning
assembly.
Please retain the assembly tools. You will need them in the
future to re-tighten the bolts, or if you want to dismantle the
furniture for storage.
Please make sure that the product is clean and dry before
putting it into storage.
We recommended the use of furniture covers to protect your
furniture when not in use. During severe weather conditions,
please move your furniture inside
To clean your items, please use mild detergent in warm water.
Rinse with clean water and dry thoroughly.
Do not use abrasive cleaners, strong detergents, bleach, acid
or solvents on the frame parts.
When cleaning glass panels use a damp cloth with washing up
liquid or soft soap if necessary. Do not use washing powders or
any other substances containing abrasives since these
substances scratch glass panel
The glass used in this product is toughened and
complies with BS EN 12150-1:2009.
When moving furniture never drag the pieces across the floor,
as this will cause damage to the joints.
Please do not leave your product outside when not in use.
During bad weather and winter months theproduct should be
dismantled where possible and stored in a cool dry place
Do not use silicone based furniture polish.
If the glass is chipped or broken, stop using the product and
consult Next.
Do not place very hot or very cold items on the glass surface,
unless adequately thick table mats are used to prevent such
items from coming into contact with the glass.
Do not use glass as a chopping surface.
Do not strike the glass with hard or pointed items.
Tools required
6mm
Hex Key

804781
MONTEGO RECTANGULAR TABLE
1
3
3
2
2
Produced in China for Next Retail Ltd.
Assembly instructions
GETTING TO KNOW YOUR PRODUCT
2
Components supplied. Please use thisguide if you require replacement parts.
Qty
VisualDimensions n
t
Cf
e
R
1
3
2
1
1
1
1
2
2
673886-2014-V1
mm 130120110100908070605040302010
Ruler - Use this ruler to help correctly identify the screws
Fixtures and fittings
supplied (actual size)
Dimensions
Ref Qty
C
A
B
1420x910mm
887x700mm
1338x30mm
M6
M6x16mm
M6
8
8
8

Make sure that all of the bolts have been tightened completely
and cover them with bolt caps .
804781
MONTEGO RECTANGULAR TABLE
3
Produced in China for Next Retail Ltd.
Assembly instructions
673886-2014-V1
2
22
2
3
3
3
1
11
3
2
22
3
3
1
1
3
A
A
B
B
C
C
1
2
M6x16mm
A x 8
B x 8
Note: The arrows mark on the leg and supports should coincide with figure to ensure proper assembly.
Place the table top onto a non-abrasive surface, such as a carpet, with its underside facing upwards.
Insert the legs and supports onto the table top rim.
21
1
3
32
Fasten the supports to the legs by using bolts and
washers .
2
3A
B
C
Warning : In order to avoid scratching
the glass, please do not remove the
protective paper from the underside
until assembly is complete.
d6.5*D13*1.0

804781
MONTEGO RECTANGULAR TABLE
4
Actual product size
H71 x W142 xD91cm
Produced in China for Next Retail Ltd.
673886-2014-V1
3
Turn the table to its upright position.
1420mm
910mm
710mm