Next JULIETTE 363818 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick
insulation material is used to prevent such items from coming into contact with glass.
• Care must be taken when cleaning around the product with a vacuum cleaner to prevent damage to the glass panels.
• Do not strike the glass with hard or pointed items.
• Do not sit or stand upon horizontal glass surfaces.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
CARE INSTRUCTIONS
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
PRODUCT INFORMATION
• Do not rub or scrub the surface when cleaning.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Made in China.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Not suitable for use in bathrooms.
• For general cleaning, periodically dust with a soft cloth.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
363818 JULIETTE CHEST
1 of 3

1. Attach 2 x handles (E) to drawer front using 2 x
spacers (G), 2 x rubber washers (G) and 2 x screws
(F). Tighten with a screwdriver.
NOTE: ensure not to over tighten the screws. DO NOT
use power tools.
2. Repeat with the remaining handles and drawers.
• This product containers 2mm glass that does not conform to BS6206. If the glass is chipped or broken replace with
glass of the type described. Consult the manufacturer, retailer or agent with regard to obtaining a manufacturing
specification and shape for replacement glass quoting the model number and batch number or date of manufacture.
GLASS INFORMATION
• This item contains glass. Please handle with extreme care.
STEP ONE
• BS 7449: 1991.
FITTINGS
PARTS
• Batch No.: 092011/ Date of Manufacture: 09/2011
2 of 3

1. Turn over the chest, place on a soft flat surface. We
recommend using the packaging materials.
2. Remove the bottom drawer.
3. Attach 4 x legs 1 to the bottom panel of the chest
using 8 x bolts (B), 8 x spring washers (D) and 8 x
washers (C). Tighten with Allen key (A).
4. Turn the chest over and re-insert the bottom
drawer.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP TWO
3 of 3