Next WESTCOTT 127530 User manual

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
Actual product size
H115 x W147 x D235cm (Double)
H115 x W162 x D245cm (King)
H115 x W192 x D245cm (Super King)
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Produced in China for Next Retail Ltd.
Version 1 1

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
Align with long point of cross
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Pillar head needs to be in centre
CORRECT WRONG
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below)
Shoulder
NO GAP
Panel
Panel
Produced in China for Next Retail Ltd.
Version 1 2

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
Warnings
Number of people required to assemble
Important: Retain these instructions for future reference. Two person are required to assemble this product.
Unwrap all packaging materials and place the components on
Time to assemble
top of the carton box or on a clean floor to prevent it from
scratching.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do's
We suggest you spend a short time reading through this
Tools required
leaflet before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for assembly.
Check the pack and make sure you have all the parts listed.
BEFORE YOU START
Check the pack and make sure you have all the parts listed.
During assembly children should be kept away from the
product due to possible risk of injury.
Tools not included.
Missing parts
Due to the size of this product we recommend that it is If you are missing any fixtures and fittings for your product
assembled in the room intended for use. please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
Ensure that this product is fully assembled as illustrated to you fee of charge.
before use.
Home service technicians
Check all screws or bolts are tightened and inspect regularly.
If you have a fault with your product please contact our
To clean,wipe with a sponge and warm soapy water. Do not customer service team on 0333 777 8999. If you have had the
use solvent based cleaners or detergents as they can bleach product for 28 days or less you may be offered a replacement,
or damage the product. refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
Don'ts If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
Do not use power tools to construct this product. the product wher possible and recommend further action.
Do not tighten screws until fully assembled.
You can write to us at
Do not overtighten screws or bolts. Home Customer Services
Next Retail Ltd,
Do not stand on the product. Desfore Road,
Leicester,
Do not use this product if parts are missing, damaged or LE19 4AT,
worn.
To view our full furntiure range please visit www.next.co.uk
Never use scourers, abrasives or chemical cleaners.
Produced in China for Next Retail Ltd.
Version 1 3

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
GETTING TO KNOW YOUR PRODUCT
Produced in China for Next Retail Ltd.
Version 1 4

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
CUSTOMER HELPLINE
If you have any problem with this product or require any replacement fittiings please contact customer services 0333 777 8999
Components supplied Fixtures and fittings supplied
Produced in China for Next Retail Ltd.
Version 1 5

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
1
1
C x8 M6 x 25mm F x8 M6 G x8 M6 N x1 M8
2
Produced in China for Next Retail Ltd.
Version 1 6

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
33
C x4 M6 x 25mm F x4 M6 G x4 M6 N x1 M8
D x4
M6 x 35mm
Hx8 M8 E x4 M8 O x1 M8
54
Produced in China for Next Retail Ltd.
Version 1 7

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
5755
C x12 M6 x 25mm F x12 M6 G x12 M6 N x1 M6
1
B x6 M6 x 35mm F x6 M6 G x6 M6 N x1 M6
6
Produced in China for Next Retail Ltd.
Version 1 8

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
7
B x3 M6 x 35mm F x3 M6 G x3 M6 N x1 M6
1
A x4 M6 x 50mm F x4 M6 G x4 M6 N x1 M6
8
Produced in China for Next Retail Ltd.
Version 1 9

WESTCOTT 4 DRAWER BED
127530
Assembly instructions
9
L x16
65 x 30mm
Mx32 65 x 60mm
1
I x16 4 x 29mm K x8 Φ8*30mm
10
Produced in China for Next Retail Ltd.
Version 1 10