Next 950401 User manual

Need Help?
CALL: 0333 777 8999
Actual product size
H24 x Diam38cm
Felt Easy Fit
Assembly instructions
IMPORTANT ─ RETAIN FOR FUTURE REFERENCE
With: Assembly instructions
Missing or damaged parts
Produced in China for Next Retail Ltd.
950401-2014-V1
950401
24cm
38cm

950401
Assembly instructions
Produced in China for Next Retail Ltd.
950401-2014-V1
One person is required to asseble this item.
To View our full furniture rangeplease visit www.next.co.uk
BEFORE YOUSTART
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester
LE19 4AT
Number of people required to assemble
Missing parts
You can write to us at
Don’ts
Not suitable for children under 36 months due to small parts.
Do not exceed the maximum wattage as this may cause
overheating.
Do not use polish or abrasive cleaners as these may
damage the finish.
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from the construction area.
This lamp may only be used indoors.
Unwrap all packaging meterials and place the components
on top of the carton box or on a clean floor to protect it from
damage.
Do’s
We suggest you spend a short time reading through this
leaflet before you start.
Carefully check that you have all the parts before beginning
assembly.
Warnings
Use the correct bulb type 240V / B22 / MAX. 42W ECO Halogen
or 15W Energy Saver. This product may be used with European
or energy saving bulb holders. Simply remove the plastic reducing
ring to accommodate this type of lamp holder.
Always switch off the appliance at the main power supply and
allow the bulb to cool for 15 minutes before replacing.
Clean only with a soft dry cloth.
THIS PRODUCT IS NOT A TOY AND IS NOT SUITABLE FOR
USE BY UNSUPERVISED CHILDREN.
Felt Easy Fit

Felt Easy Fit
950401
Assembly instructions
Produced in China for Next Retail Ltd.
950401-2014-V1
2
GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require replacement parts.
1
2
3
1 1 1
1 12
Qty QtyVisual VisualDimensions DimensionsCtn CtnRef Ref
40 x 40CM
14 x 14CM
22.5 x 1.5CM 1
23

Felt Easy Fit
950401
Assembly instructions
Produced in China for Next Retail Ltd.
950401-2014-V1
3
1
Dia.1
Dia.2
Dia.1
Dia.1
2
3
3
1
2
1. Insert the steel frame (3) into the
lampshade, then attach it to the
corresponding hole on the top of
lampshade (1) as shown in
Dia. 1 and Dia. 2.
Remark: Pay attention to the
position of the holes.
2. Attach the PP ring (2) on the inside
bottom of lamp shade as shown in Dia. 1.
3. Pass through the steel frame (3)
into the corresponding hole of
bottom ring (2) as shown in Dia. 1.
4. Repeat the above step to complete
the second steel frame.