Niche SOHO DESK SHELL NSDS4318 User manual

B: Support
Bar
2 Pcs
C: X-Wire
Findyourniche
VERSATILE AND MODERN
SOHO DESK SHELL
NSDS4318
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
IN THE BOX:
L: Screw
Cap
F: Small
Screw
E: Long
Screw
10 Pcs
2 Pcs
4 Pcs 4 Pcs
D
C
B
A
A
B
A: Leg
D: Desk Top

STEP 1A
STEP 2
Using Long Screw (E)
connect Leg (A) to
Support Bar (B). Align
pieces, and then insert
Long Screw (E)
through preexisng hole.
Note: Make sure the
preexisng holes on
Support Bar (B) are
facing upwards.
Repeat this process and
use a Long Screw (E)
to connect the opposite
side of the Support Bar (B)
to the remaining Leg (A).
Aach X-Wire (C) to assembled frame by using both Small
Screws (F) and Screw Caps (G). Align X-Wire (C) with preexisng
holes on the outside of your assembled frame, insert Small
Screws (F) through the X-Wire (C) and aach Screw Caps (G)
from the opposite side of the frame. See Figure 1.
Aach assembled base to Desk Top (D) using Long Screws (E).
Align assembled frame with preexisng holes on Desk Top (D),
and screw into place.
Figure 1
STEP 1B
STEP 3
Using Long Screws (E) connect Leg (A) to the remaining
Support Bar (B). Align pieces, and then insert Long Screw (E)
through preexisng hole.
Note: Make sure the holes on the Legs (A) for Step 2 are on the
same side of the assembly
Findyourniche
VERSATILE AND MODERN
SOHO DESK SHELL
NSDS4318
ASSEMBLY INSTRUCTIONS
B
B
E
AA
A
E
Holes
Hole E
EE
C
C
F
F
E
F
G
G
G
E
EE
DE
E