Niche NDS6128 User manual

Findyourniche
VERSATILE AND MODERN
61" DESK SHELL NDS6128
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
featuring
IN THE BOX:
A: Top
B: Modesty
C: Leg (2) D: Support Bracket (2)
A
B
C

Findyourniche
VERSATILE AND MODERN
61" DESK SHELL NDS6128
ASSEMBLY INSTRUCTIONS
STEP 1
Aach Modesty (B) to Leg (C) by lining up clip with the coordinang
hole and pressing into place (See gure 1.)
Insert Support Brackets (D) into Modesty (B). Line up clips with
coordinang holes, insert, and press down into locked posion. Flip
the build over so it is standing on both Legs (C).
Aach Modesty (B) to the remaining Leg (C) by lining up clip
with the coordinang hole and pressing into place (See gure 1.)
Place Top (A) onto assembled frame by lining up holes with
coordinang pins on Support Brackets (D) and Legs (C), and
gently seng down into place. Slide Top (A) towards the front
of the assembly to lock into place. Make sure Top (A) is lined up
STEP 2
STEP 4
STEP 3
Figure 2
C
C
C
B
B
D
B
D
C C
A
D
B
C
A
BC

Findyourniche
VERSATILE AND MODERN
38" RETURN SHELL NRT3820
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
featuring
IN THE BOX:
A: Top
B: Modesty
C: Leg D: Support Bracket E: Joining Bracket
F: Pin (2)
A
B
C

Findyourniche
VERSATILE AND MODERN
38" RETURN SHELL NRT3820
ASSEMBLY INSTRUCTIONS
STEP 1
Aach Modesty (B) to Leg (C) by lining up clip with the coordinang
hole and pressing into place (See gure 1.)
Place assembled poron on to Top (A), make sure to line up clips
on Leg (C) and Support Bracket (D), with coordinang holes, insert,
and slide into locked posion. Then, carefully ip the build over so
it is standing upright.
Aach Support Bracket (D) to the Modesty (B) by lining up clip
with the coordinang hole and pressing into place (See gure 1.)
Make sure the bracket is facing where the top will be placed.
Place Push Pins (F) into predrilled holes in Leg of Assembled
Desk. Line up predrilled holes on Modesty (B) with Push
Pins (F) and press ush together. From under the desk, insert
Joining Bracket (E) into coordinang holes on Top (A) and the
Desk Top and slide into the locked posion.
STEP 2
STEP 4
STEP 3
Figure 2
C
B
D
B
C
B
C
D
A
F
B
E
A
Underside of Return & Desk
TOP

Findyourniche
VERSATILE AND MODERN
PEDESTAL NPBF19
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
Note: Drawers and Pedestal assemble separately. Separate
Drawer pieces from Pedestal pieces before starng.
featuring
IN THE BOX:
A: Pedestal Back
C: Pedestal Boom E: Box Drawer Front
I: Box Drawer Sides (2)
F: Box Drawer Back
B: Pedestal Sides (2)
D: Pedestal Top
D
G
K
E
B
H: Drawer Boom (2)
G: File Drawer Front
K: File Drawer Sides (2)
J: File Drawer Back

Findyourniche
VERSATILE AND MODERN
PEDESTAL NPBF19
ASSEMBLY INSTRUCTIONS
STEP 1 BOX DRAWER ASSEMBLY
FILE DRAWER ASSEMBLY
Snap both Box Drawer Sides (I) onto the
Box Drawer Front (E) by lining up lockdowels
and pins with their coordinang holes and
pressing into place (See gure 1.) Make sure
drawer glides are on outside and facing front.
Place components upright. Snap File Drawer
Sides (K) onto File Drawer Front (G). Line up
E-clips with coordinang holes, and press
forward into place (See gure 2.) Make sure
drawer glides are on the outside and facing
front.
Repeat this step for
the remaining File
Drawer Side (K).
STEP 2A: Insert Drawer Boom (H) into assembled box drawer by lining up with slots
and sliding into place.
STEP 2B: Aach Box Drawer Back (F) to the Box Drawer Sides (I) by lining up lockdowels
with their coordinang hole and pressing into place.
Step 4A: Insert Drawer Boom (H) into assembled box drawer by lining up with slots
and sliding into place.
STEP 4B: Aach File
Drawer Back (J) to the File
Drawer Sides (K) by lining
up lockdowels with their
coordinang hole and
pressing into place.
E
H
F
STEP 2A:
STEP 2B:
I
I
I
G
H
K
K K
STEP 2
STEP 4
STEP 3
Figure 1
Figure 2
Front
J
K
K

Findyourniche
VERSATILE AND MODERN
PEDESTAL NPBF19
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
STEP 8
STEP 7
Snap Pedestal Back (A) to Pedestal Boom (C). Line up pins
with coordinang holes and press down into place.
Snap Pedestal Top (D) to assembled pedestal,
by lining up holes with coordinang pins and
pressing into place.
Insert both drawers into pedestal base by lining up bracket glides and sliding into place.
Aach both Pedestal Sides (B) to Pedestal Back (A) and Pedestal
Boom (C) by lining up pins with coordinang holes and pressing into
place.
A
C
PEDESTAL ASSEMBLY
A
B
C
DBox Drawer
File Drawer
Repeat this step
for the remaining
Pedestal Side (B).