Niche HBTOTEWNT User manual

PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email [email protected]
www.mynichefurniture.com
ASSEMBLY INSTRUCTIONS:
HBTOTEWNT — Cubo Foldable Wicker Storage Bins
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts & hardware
• Remove all wrapping materials & packing straps
• Keep all hardware, small parts & packaging out of reach of children
• Do not tighten all screws/bolts until product is completely assembled
PARTS & HARDWARE:
STEP 1: STEP 2:
A: Foldable Bin
The Foldable Bin (A) and the Bottom Panel
(B) will come packaged like this and attached
to each other.
Remove the straps and then pull Bottom
Panel (B) from Foldable Bin (A) by lifting
from the metal tabs on Bottom Panel (B).
B: Bottom Panel

PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email [email protected]
www.mynichefurniture.com
STEP 3:
STEP 6:
STEP 4: STEP 5:
ASSEMBLY INSTRUCTIONS:
HBTOTEWNT — Cubo Foldable Wicker Storage Bins
Once detached, you should have two parts.
Once in place, ensure that the metal pins on
the Foldable Bin (A) are holding the sides
that don’t already have metal stoppers. There
should be at least 1 stopper on each of the 4
sides.
Once stoppers are all in the correct spots,
tighen down the stoppers with a screwdriver
on Foldable Bin (A) so they don’t spin out
of place.
Take the Foldable Bin (A) by both handles
and pull it into a square shape.
Place Bottom Panel (B) into Foldable Bin (A)
at an angle. Ensure the metal stops are facing
the bottom of the bin.
A
A
B