Niche NCT8442 User manual

Find your niche
VERSATILE AND MODERN
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
• Fit will be snug, you may need a rubber mallet
• You will need two people for assembly
ASSEMBLY INSTRUCTIONS
IN THE BOX:
A: Table Top (2)
B: Legs (2)
C: Stringer D: Brackets (2)
A
C
D
B
B
CONFERENCE TABLE NCT8442
NCT6834

Find your niche
VERSATILE AND MODERN
CONFERENCE TABLE NCT8442
NCT6834
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
With the Table Top Pieces (A) laying face down, line up pins
with their coordinang holes and press together in to place.
Aach Brackets (D) to the assembled Table Top (A) by lining up
EClips with their coordinang holes pressing down in to place,
and then tapping towards the center of the table. See Figure 1
for details.
Note: Fit will be snug, you may need to tap in to place with
a rubber mallet. Use two people to ip the table over once
assembled.
Note: You may need to tap in to place with a rubber mallet.Note: You may need to tap in to place with a rubber mallet.
A
D
C
B B
D
D
A
A
A
C
STEP 2
STEP 4
Aach Stringer (C) by lining up EClips with coordinang holes
on the assembled Table Top (A), pressing down and over in to
place. See Figure 1 for details.
Figure 1
Aach both Legs(B) by lining up holes with coordinang EClips on
the sides of the Stringer (C) and lining up pins with coordinang
holes on the Table Top (A). Press downward to lock into place.
A
C
A
Figure 1
D
A