Niche CUBO PC1206 User manual

Findyourniche
VERSATILE AND MODERN
CUBO STORAGE CUBE PC1206
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
IN THE BOX:
A: Top & Boom Panels (2)
B: Side Panels (2)
C: Back Panel D: Spring Pins (4)
A
A
B
B

Findyourniche
VERSATILE AND MODERN
CUBO STORAGE CUBE PC1206
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
With the Boom Panel (A) laying at, aach both Side Panels
(B) by lining up lock dowels and pins with their coordinang
holes and pressing down in to place.
Aach Back Panel (C) to the Boom Panel (A) by lining up lock
dowels and pins with their coordinang holes and pressing
down in to place.
Note: Pieces snap together in numerical order.
Note: Pieces snap together in numerical order.
Note: Pieces snap together in numerical order.
Note: You may need to tap in to place with a rubber hammer.
AA
C
B
B
STEP 2
OPTIONAL STEP 4
Aach Top Panel (A) by lining up holes with coordinang lock
dowels and pins on the Back Panel (C) and Side Panels (B)
and pressing down in to place.
To aach two cubes together, insert Spring Pins (D) in to pre-
drilled holes on side of Cube of your preference. Next line up
holes on second cube with Spring Pins (D) and press in to
place. Be Creave!
A
C
BB