Niche NL47WS User manual

PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email [email protected]
mynichefurniture.com
ASSEMBLY INSTRUCTIONS:
NL47WS — Niche Lux 47” Wall Shelf
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
• Do not tighten all screws/bolts until product is completely assembled
PARTS & HARDWARE:
A: 2x
Screws
B: 4x Bolts
C: 2x
Anchors
D: 2x Pegs
E: 1x Hex Tool F: 4x Caps
1: 1x Shelf
2: 1x Backsplash

PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email [email protected]
mynichefurniture.com
STEP 1:
STEP 3: STEP 4:
STEP 2:
ASSEMBLY INSTRUCTIONS:
NL2TSLT — Niche Lux Tiered Wall Shelf
Insert 2 Pegs (D) into the predrilled holes in the end of
Shelf (1)
If needed for your wall type, drill a hole at the final marks
and tap Wall Anchors (C) into wall. Insert Screws (A) into
wall, leaving 1/4” exposed (See Fig. 1). Hang shelf over
exposed screws.
Attach Shelf (1) to Backsplash (2) using 4 Bolts (B).
Note: Line up attached Pegs (D) with predrilled holes in
Backsplash (2)
D
112
B
E
D
Step 3a: Place assembled shelf at desired location on
wall. Make a small mark at the two top corners of the
Backsplash (2). Note: Make sure shelving unit is level
before placing marks on wall.
Step 3b: Measure 4-inches inside and 2-inches down
from corner marks and make a final mark to place
mounting screws. Fig. 1
A