Night Watcher HVR5006D-E User manual

NightWatcherD1 Digital Video Recorder User Manual
1
NightWatcher Security
4 Channel/8 Channel D1 DVR
User Manual

NightWatcher D1 Digital Video Recorder User Manual
2
Welcome
Thank you for purchasing the NightWatcher D1 CCTV System.
This manual is designed to be a reference tool for the installation and operation of your system.
Here you can find information about the DVR features and functions, as well as a detailed menu tree.
Before installation and operation please read the following safeguards and warnings carefully.
Important Safeguards and Warnings
•Do not place any heavy objects on top of the DVR.
•Do not let any solids or liquids spill into or infiltrate the DVR.
•Gently brush clean the DVR surfaces regularly. Before cleaning please switch off and disconnect the
power supply.
•Do not disassemble or attempt to repair the DVR by yourself. If repair is necessary please contact
the reseller or a qualified specialist.
Environment
•Please install the DVR in an appropriate temperature environment; min 0˚C, max 40˚C.
•Avoid direct sunlight and install away from any direct heat source.
•Do not install the DVR in a damp environment.
•Do not install the DVR in a smoky or dusty environment.
•Avoid collision or fall.
•Please ensure the DVR is installed in a stable work environment.
•Please install in a well ventilated and clean location.
•Always use within the recommended input and output rating.

NightWatcherD1 Digital Video Recorder User Manual
3
Contents
1. Product Introduction ...............................................................................................................................................5
1.1 Product overview..................................................................................................................................................5
1.2 Main functions......................................................................................................................................................5
2. Open-Box check and cable connections………………………………………………………………..…………5
2.1 Open-Box check....................................................................................................................................................7
2.2 Frame installation..................................................................................................................................................7
2.3 Front panel ............................................................................................................................................................8
2.4 Rear panel ...........................................................................................................................................................10
2.5 Installation connections sketch map (Below just as the 4CH DVR for example,Specifically please refer to practical product.) ..............11
2.6 Audio and video input and output connections...................................................................................................12
2.6.1 Video input connections...........................................................................................................................12
2.6.2 Video output connections and options .....................................................................................................12
2.6.3 Audio input...............................................................................................................................................13
2.6.4 Audio output.............................................................................................................................................13
2.7 Alarm input and output connections(Some models no such function,please prevail in kind.).....................................................13
2.7.1 Alarm input port specification(This feature should be used in conjunction and external alarm module, some models have an external
alarm module for optional.）.................................................................................................................................14
2.7.2 Alarm output port specification(This feature should be used in conjunction and external alarm module, some models have an external
alarm module for optional.）.................................................................................................................................14
2.8 Speed dome connections.....................................................................................................................................15
3. Basic operation...................................................................................................................................................16
3.1 Turn on................................................................................................................................................................16
3.2 Turn off ...............................................................................................................................................................16
3.3 Login................................................................................................................... Error! Bookmark not defined.
3.4 Preview ............................................................................................................... Error! Bookmark not defined.
3.5 Desktop shortcut menu........................................................................................ Error! Bookmark not defined.
3.5.1 Record Mode............................................................................................ Error! Bookmark not defined.
3.5.2 Video playback......................................................................................... Error! Bookmark not defined.
3.5.3 PTZ control.............................................................................................. Error! Bookmark not defined.
3.5.4 Color Setting............................................................................................ Error! Bookmark not defined.
3.5.5 Output Adjust........................................................................................... Error! Bookmark not defined.
3.5.6 Window switch......................................................................................... Error! Bookmark not defined.
3.5.7 System information.................................................................................. Error! Bookmark not defined.
3.5.7.1 Hard Disk information ...................................................................... Error! Bookmark not defined.
3.5.7.2 Log information ................................................................................ Error! Bookmark not defined.
3.5.7.3 Code stream statistics........................................................................ Error! Bookmark not defined.
3.5.7.4 Online user........................................................................................ Error! Bookmark not defined.
3.5.7.5 Edition information........................................................................... Error! Bookmark not defined.
3.5.8 Logout...................................................................................................... Error! Bookmark not defined.
4. Main Menu......................................................................................................... Error! Bookmark not defined.
4.1 Main Menu navigation........................................................................................ Error! Bookmark not defined.
4.2 Record Mode....................................................................................................... Error! Bookmark not defined.
4.3 Record Config..................................................................................................... Error! Bookmark not defined.
4.4 Encode setup....................................................................................................... Error! Bookmark not defined.

NightWatcher D1 Digital Video Recorder User Manual
4
4.5 HDD manage ...................................................................................................... Error! Bookmark not defined.
4.6 Network setup..................................................................................................... Error! Bookmark not defined.
4.7 PTZ config.......................................................................................................... Error! Bookmark not defined.
4.8 Alarm setup......................................................................................................... Error! Bookmark not defined.
4.8.1 Motion Detect .......................................................................................... Error! Bookmark not defined.
4.8.2 Video Blind.............................................................................................. Error! Bookmark not defined.
4.8.3 Video Loss................................................................................................ Error! Bookmark not defined.
4.8.4 Alarm input .............................................................................................. Error! Bookmark not defined.
4.8.5 Alarm output ............................................................................................ Error! Bookmark not defined.
4.9 System setup ....................................................................................................... Error! Bookmark not defined.
4.9.1 General setup ........................................................................................... Error! Bookmark not defined.
4.9.2 GUI Display............................................................................................. Error! Bookmark not defined.
4.9.3 Account management............................................................................... Error! Bookmark not defined.
4.9.4 Upgrade.................................................................................................... Error! Bookmark not defined.
4.9.5 Restore config.......................................................................................... Error! Bookmark not defined.
4.9.6 Backup ..................................................................................................... Error! Bookmark not defined.
4.9.7 Device Info............................................................................................... Error! Bookmark not defined.
4.9.8 AutoMaintain ........................................................................................... Error! Bookmark not defined.
5. Netview and Management ................................................................................. Error! Bookmark not defined.
5.1 WEB network control ......................................................................................... Error! Bookmark not defined.
5.2 Client CMS software operation........................................................................... Error! Bookmark not defined.
6. FAQ and Maintenance ....................................................................................... Error! Bookmark not defined.
6.1 FAQ.................................................................................................................. Error! Bookmark not defined.
6.2 Maintenance........................................................................................................ Error! Bookmark not defined.
Appendix 1.Remote controller operation.................................................................. Error! Bookmark not defined.
Appendix 2.Mouse operation.................................................................................... Error! Bookmark not defined.
Appendix 3.Hard Disk capability calculation........................................................... Error! Bookmark not defined.
Appendix 4. Technique parameters........................................................................... Error! Bookmark not defined.

NightWatcherD1 Digital Video Recorder User Manual
5
1. Product Introduction
1.1 Product overview
The NightWatcher D1 DVR is designed specifically for security and surveillance applications. and is an
outstanding digital surveillance product. It incorporates an embedded LINUX operating system which is more
stable. It incorporates standard H.264mp video compressed format and G.711A audio compressed format which
ensures the highest quality image, low error coding ratio and single frame playback. It incorporates TCP/IP
network technology which ensures stable network communication and telecommunication ability.
The NightWatcher D1 DVR can be used individually or online, applied as a part of a safety surveillance
network. With the professional network video surveillance software provided it offers comprehensive network and
telecommunication ability.
The NightWatcher D1 DVR can be installed in a variety of applications in business or at home.
1.2 Main functions
Real-time surveillance
· HDMI and VGA interface
· surveillance function through monitor or display
Storage
· non-working hard disk dormancy processing which is convenient to radiate heat, reduce power and extend
life-span
·unique storage format which ensures data protection
Compression
·real-time compression by individual hard disk which ensures the audio and video signal stable synchronization
Backup
·through SATA and USB interface, such as USB hard disk, memory stick and etc.
· through network download of files on the hard disk
Playback
· individual real-time video recording as well as search, playback, network surveillance, recording check,
downloading and etc.

NightWatcher D1 Digital Video Recorder User Manual
6
· multi-channel playback mode
· zoom-in to arbitrary locations
Network operation
· through network tele-surveillance in real time
· remote control PTZ
· remote check of recording and real-time playback
Alarm linkage
·single channel relay alarm output which is convenient for alarm linkage and light control at the spot
·protect circuits at the alarm input and output interface which protects the main machine from damage
Communication interface
·RS485 interface providing the alarm input and PTZ control
·standard ethernet network interface providing network communication function
Intelligent operating
·mouse action function
·fast copy and paste operating for the same setting

NightWatcher D1 Digital Video Recorder User Manual
7
2. Open-Box check and cable connections
2.1 Open-Box check
When you receive your NightWatcher D1 CCTV kit, please check the contents.
Firstly, please check whether there is any visible damage to the package appearance. The packaging materials
used for the CCTV kit are designed to protect most accidental knocks during transportation.
Then, please open the box and remove the plastic protective materials. Check whether there is any visible
damage to the DVR appearance.
(1).Front panel and rear panel
♦The function buttons on the front panel and the interface specification on the real panel are as outlined in
the prodsuct specification.
♦Please check the product description on the front panel is in accordance with the product type ordered.
The label on the base of the DVR is very important for after sales service. Please protect it carefully. When
you contact our customer service, please provide the product type and serial number on the label.
(2). DVR internal (only required if DVR is supplied without Hard Disk)
In addition to checking whether there are obvious signs of damage, please ensure there are no damaged or
loose cable connection.
2.2 Frame installation
The specification of the DVR is a standard 1U. It can be installed in a standard frame.
Installation recommendations:
1、Ensure the housing temperature is <35℃.
2、Locate the DVR at least 15cm away from other equipment.
3、Frame installation from bottom to top.
4、If installing multiple components in the frame, take precaution to avoid any capacity overload.

NightWatcher D1 Digital Video Recorder User Manual
8
2.3 Front panel
4CH DVR panel 1:
1 2 3 4 5 6 7
19 17 18 8 9 10 11 12 13 14 15 16 20
8CH DVR panel 1:
1 2 3 4 5 6 7
19 17 18 8 9 10 11 12 13 14 15 16 20
(1) recording search button / 7 (2) PTZ control button / 8 (3) recording button / 0
(4) shift function button (5) cancel button (6) menu & confirm button
(7) up button (8) play previous file / 1 (9) play next file / 2
(10) slow play / 3 (11)fast play / 4 (12) playback or pause / 5
(13) play or pause / 6 (14) left button (15) down button
(16) right button (17) IR remoter receiver (18) hard disk indicator light
(19) power indicator light (20)power switch (21)hard disk information

NightWatcher D1 Digital Video Recorder User Manual
9
Front panel button operation function table
Num. Button name Mark Function
1 Shift function button SHIFT Shift the number button, character button and other function buttons
during input mode
2
Direction button
< >
Remove the cursor
Add or decrease number during the user edit mode
Change menu settings
Enter 1 channel or 4 channels during surveillance
After pressing the shift button, press this button to enter 1 or 4 during
edit mode
< >
Remove the cursor when the main menu or submenu is displayed
Remove the cursor during the playback mode
Select 2 channel or 3 channel during surveillance image
After pressing the shift button, press this button to enter 2 or 3 during
edit mode
Main menu/Confirm
button
ENTER
Confirm
Enter main menu
3 Cancel button ESC Back to the previous level menu or cancel operation in the menu
Back to the real-time surveillance during playback mode
4 Play previous file
button
I

Play previous video during the playback mode
Enter 1 during edit mode
5 Play next
file button

I Play next video during the playback mode
Enter 2 during edit mode
6 Slow play ►Play video in multi-slow or regular speed during playback mode
Enter 3 during edit mode
7 Fast play

Play video in multi-fast or regular speed during playback mode
Enter 4 during edit mode
8 Playback/pause button II/

Playback the video or pause during playback mode
Enter 5 during edit mode
9 Play/pause button

\II Play the video or pause during the playback mode
Enter 6 during edit mode
10 Recording button REC
Start/stop the video recording manually
With the direction button choose the channel in the recording control
menu

NightWatcher D1 Digital Video Recorder User Manual
10
2.4 Rear panel
4CH DVR panel 1
8CH DVR panel 2
(1) alarm input/alarm output (2) VGA output (3) network interface
(4) ON/OFF (5) video output (6) video input
(7) audio input (8) audio output (9) CD12V
(10) RS485 (11) USB interface
Note: Some models have a front panel USB interface; the bottom USB interface on the rear panel USB port is
mutually exclusive; i.e. only the front or bottom rear panel port can be used at the same time. The top USB port is
independent and effective.

NightWatcher D1 Digital Video Recorder User Manual
11
2.5 Installation connection sketch map. (This is a 4CH DVR for example. Refer specifically to your
product specification.)

NightWatcher D1 Digital Video Recorder User Manual
12
2.6 Audio and video input and output connections
2.6.1 Video input connections
The video input port is a BNC connector plug. The input signal is PAL/NTSC BNC(1.0VP-P,75Ω).
The video signal must be in accordance with the specified standard which has the high signal to noise ratio,
low aberration and low interference. The image must be clear and have natural color with appropriate brightness.
Ensure the camera signal is stable and credible
The camera should be installed in an appropriate location, away from backlighting and low illumination or
apply better backlighting and low illumination compensation.
The ground and power supply of the camera and the DVR should be shared and stable.
Ensure the transmission line is stable and credible
The video transmission line should adopt high quality coaxial pair which is defined by the transmission
distance. If the transmission distance is too far, use a shielded twisted pair, video compensation equipment or
transmitted by fiber to ensure signal quality.
The video signal line should be away from any electro magnetic interference and other equipment signal lines.
The high voltage current should be especially avoided.
Ensure the connection stable and credible
The signal and shield lines should be firmly connected and eliminate any poor joint welding and oxidation.
2.6.2 Video output connections and options
The video output is divided into PAL/NTSC BNC(1.0VP-P,75Ω) and VGA output(selective configuration).
When replacing the monitor with computer display, there are some practical considerations;
1、Do not leave in “turned-on” state for extended periods.
2、Keep the computer display working normally by demagnetizing regularly.
3、Avoid any electro magnetic interference.
TV is not an ideal replacement for video output. It is recommended to minimise usage time and control the
power supply and any interference introduced by nearby electronic equipment. The discharge of low quality TV
can lead to the damage of other equipment.

NightWatcher D1 Digital Video Recorder User Manual
13
2.6.3 Audio input
The audio port is an RCA connection.
The input impedance is high so the tone arm must be active.
The audio signal line should be firm and away from any electro magnetic interference and eliminate any poor
joint welding and oxidation. A high voltage current should be avoided especially.
2.6.4 Audio output
The output parameter of the DVR audio signal is greater than 200mv 1KΩ (BNC) which can connect to a low
impedance earphone and active speaker or other audio output equipment through a power amplifier. If the
speaker and the tone arm cannot be isolated, there may be a problem with feedback. There are certain method to
deal with the above issue;
1、Adopt better directional tone arm.
2、Adjust the speaker volume to be below the threshold that produces feedback.
3、Use materials which absorb the sound and reduce sound reflection.
4、Adjust the location of the speaker box and the tone arm.
2.7 Alarm input and output connections (Only available on certain products.)
１、
Alarm input
A. Alarm input is grounding alarm input.
B. Alarm input demands the grounding voltage signal.
C. When the alarm is connected with two DVRs or connected with DVR and other equipment, it should be
isolated by relay.
２、
Alarm output
Alarm output cannot be connected with a high-power load (no more than 1A).When forming the output loop
it must prevent the big current from relay damage. Use the contact isolator when there is a high-power load
３、
PTZ decoder connections
A. The grounding of the PTZ decoder and DVR must be shared otherwise the common-mode voltage will
lead to the PTZ control failure. A shielded twisted pair is recommended.
B. Avoid the input of high voltage, ensure a reasonable layout and take precautions from lightning.
C. In the outlying end connect 120Ωresistance in parallel to reduce inflection and ensure signal quality.

NightWatcher D1 Digital Video Recorder User Manual
14
D. The RS485 +、-lines of DVR cannot be connected with other RS485 output equipment in parallel.
E. The voltage between the +、- lines of the decoder must be less than 5V.
4
、
Front equipment grounding note
Bad grounding can lead to the burnout of the chip.
5
、
Alarm input type unlimited
The DVR alarm output port is constant opening type.
2.7.1 Alarm input port specification
（
This feature should be used in conjunction with an external alarm
module. NB: Some models have an optional external alarm module.
）
4 channels alarm input. Alarm input type unlimited.
The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power supply) .
The grounding of the alarm and the DVR should be shared.
The NC port of the alarm sensor must be connected with the DVR alarm input port.
The grounding of the power supply and the alarm sensor must be shared when used in external power supply.
2.7.2 Alarm output port specification
（
This feature should be used in conjunction with an external alarm
module. NB: Some models have an optional external alarm module.
）
1 channels alarm output. There is external power supply when using the external alarm equipment.
To avoid overload and damage to the system, please refer to the relay before the connection, the relay
parameters as defined in the Annex.

NightWatcher D1 Digital Video Recorder User Manual
15
2.7.3 Alarm output port relay parameters
Type
：
JRC-27F
Interface material silver
rating
(resistance load)
Rating switch capacity 30VDC 2A, 125VAC 1A
maximal switch power 125VA 160W
maximal switch voltage 250VAC, 220VDC
maximal switch current 1A
isolation
Homo-polarity interface
1000VAC 1minute
Inhomo-polarity interface 1000VAC 1 minute
Interface and winding 1000VAC 1 minute
Surge voltage Homo-polarity interface 1500VAC (10×160us)
Turn-on time 3ms max
Turn-off time 3ms max
longevity
mechanical
50×106 MIN
（
3Hz)
electric
200×103 MIN (0.5Hz)
Environment temperature
-40~+70
℃
2.8 Speed dome connections
1、Connect the 485 lines of the speed dome with the DVR 485 interface.
2、Connect the video line with the DVR video input.
3、Connect electrical source to the speed dome.

NightWatcher D1 Digital Video Recorder User Manual
16
3. Basic operation
3.1 Turn on
Plug in the power adaptor and turn on the power supply. The power supply indicator light indicates the DVR
is on. After startup you will hear a beep. The default setting of video output to a monitor is multiple-window
output mode. If the startup time is within the video record settings time then the timing video recording function
will start up automatically. Then the video indicator light of the corresponding channel is active and the DVR is
working normally.
Note:1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V±10% /50Hz-60Hz.
We recommend using a UPS to protect the power supply under certain conditions.
3.2 Turn off
There are two methods to turn off the DVR; Soft-switching：Entering [right menu] and choosing [turn off] in
the [turn off the system] option; Hard-switching：Disconnect mains lead.
Note:
1、Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and resume previous working
status after a power failure.
2、Replacing the hard disk
Before replacing the hard disk, the power supply must be turned off.
3、Replacing the battery
Before replacing the battery, the settings information should be saved and then the power supply should
be switched off. The DVR uses a button battery. The system time should be checked regularly. If the time is
not correct you should replace the battery, we recommend replacing the battery every year and using the same
battery type.
Note: The setting information must be saved before replacing the battery otherwise information will be lost.

NightWatcher D1 Digital Video Recorder User Manual
17
3.3 System Login
When the DVR starts up, the user should login by pressing the MENU button on the remote control
or control panel. There are three user settings; the user name options are admin, guest and default
and these names have no password. Admin is the super user; guest and default’s permissions are
limited to preview and video playback. User admin and guest’s password can be amended, while their
permissions can’t be revised; user default is the default login user whose permission can be revised but
not its password.
Picture 3.1 System Login
Password protection: If the password is entered wrongly three times, the alarm will sound. If
the password is entered wrongly five times, the account will be locked. (Restarting the DVR or
after a half hour, the account will be unlocked automatically).
For your system security, please modify your password after first login.
3.4 Preview
You can right click mouse to choose the switch between the windows.
The system date, time and channel name are shown in each viewing window. The surveillance video
and the alarm status are shown in each window.
1 Recording status 3 Video loss
2 Motion detect 4 Camera lock
Table 3.1 Preview icon

NightWatcher D1 Digital Video Recorder User Manual
18
3.5 Desktop shortcut menu
In preview mode you can right click mouse to get a desktop shortcut menu. The menu includes:
main menu, record mode, playback, PTZ control, High Speed PTZ, Alarm Output, color Setting,
Output adjust, Logout, view mode shift .
Shortcut under Hybrid mode Shortcut menu under full digital mode
Picture 3.2 Shortcut Menu
3.5.1 Main menu
When you login, the system main menu is shown as below.
Picture3.3 Main Menu

NightWatcher D1 Digital Video Recorder User Manual
19
3.5.2 Playback
There are two methods for you to playback the video files in the hard disk.
1、In the desktop shortcut menu.
2、Main menu>Record->Playback
Note: The hard disk that saves the video files must be set as read-write or read-only state.(4.5.1)
Picture 3.4 video playback
1. Playback control 2. Operation hint 3. file searching
4. listed files 5. file information
【Listed files】Look up the listed files that accord with the searching criteria.
【File information】Look up the found file information.
【Playback control】See details in chart below
Key
Function
Key
Function
/ Play/Pause Backward play
Slow forward Fast forward
Previous frame Next frame
Previous file Next file

NightWatcher D1 Digital Video Recorder User Manual
20
Round play Full screen
Stop
Picture 3.5 Playback control key
Note: play under frame by frame, the playback status should be paused firstly.
【Operation tips】show function of the key that cursor placed.
Special functions
：
Accurate playback
：
Input time (h/m/s) in the time column and then click play button. The
system can operate accurate playback according to the searching time.
Local zoom
：
When the system is in single-window full-screen playback mode, you can drag your
mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click
mouse to exit.
Note: When current resolution of the channel is over Max resolution, to playback this channel,
will show a Red “X”.
3.5.3 Record Control
Please check current channel status: “○” means it is not in recording mode, “●” means it is in
recording mode.
You can use the desktop shortcut menu or click [main menu]> [recording function]> [recording
set] to enter the recording control interface.
Picture 3.8 Record Mode
【Schedule】Record according to the configuration.
【Manual】Click the all button and the according channel is recording no matter the channel state.
【Stop】Click the stop button and the according channel stops recording no matter the channel state.