Nikon CoolShot 80 i VR User manual

Instruction manual/Manual de instrucciones/
Manuel d’utilisation/Manual de instruções
Pt
En
Fr
Es

English ......................................... p. 3-21
Español ...................................... p. 22-40
Français ...................................... p. 41-59
Português brasileiro ................. p. 60-78

3
En
Fr
Es
Pt
CONTENTS
[Introduction]
Introduction ........................................................................ 4
Cautions before use ..................................................... 5-7
[Getting to know the Laser Rangefinder]
Key features ......................................................................... 8
Nomenclature/Composition ......................................... 9
Internal display ................................................................ 10
[Functions]
VR (Vibration Reduction) function ............................ 11
First Target Priority algorithm ..................................... 11
First Target Priority detection sign ............................ 11
[First step]
Inserting/Replacing battery ........................................ 12
[Mode settings]
Operation overview ....................................................... 13
Changing the distance display unit (m/YD) (F1)... 14
Changing the measurement display mode (F2)... 15
[Measurement]
Adjusting diopter ............................................................ 16
Measuring .......................................................................... 16
Single measurement ...................................................... 17
Continuous measurement ........................................... 17
[Technical notes]
Specifications ............................................................ 18-19
Troubleshooting/Repair ........................................ 20-21
English

4
En
Fr
Es
Pt ● About the manual
・No part of the manual included with this product may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written
permission.
・Nikon will not be held liable for any errors this manual may contain.
・The appearance of this product and its specifications are subject to change without notice.
●About controls for radio interference
・This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
・This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules and to EU EMC directive. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
● About measurement results
This Nikon Laser Rangefinder is a basic rangefinder. Its results cannot be used as official evidence.
Thank you for purchasing the Nikon Laser Rangefinder COOLSHOT 80i VR/COOLSHOT 80 VR.
Before using this product, please read these instructions thoroughly to ensure correct usage.
After reading, please keep this manual handy for easy reference.
[Introduction]

5
En
Fr
Es
Pt
Please observe the following
guidelines strictly so you can use
the equipment properly and
avoid potentially hazardous
problems. Before using this
product, read thoroughly the
“Cautions before use” and
instructions on correct usage
accompanying the product.
Keep this manual within reach
for easy reference.
WARNING
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential death or serious injury.
CAUTION
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential injury or material loss.
SAFETY PRECAUTIONS (Laser)
The Nikon Laser Rangefinder uses an
invisible laser beam. Be sure to
observe the following:
Warning
• Do not press the PWR button while
looking towards the optics from the
objective side. Failure to do this may
negatively affect or damage your
eyes.
• Do not aim at the eye.
• Do not point the laser at people.
• Do not look at the laser with another
optical instrument such as through
lenses or binoculars, nor with the
naked eye. This may result in damage
to the eyes.
• When not measuring, please
keep your fingers away from the
PWR button to avoid accidentally
emitting the laser beam.
• When not in use for an extended
period, please remove the battery
from the body.
• Do not disassemble/remodel/repair
the Nikon Laser Rangefinder. The
emitting laser may be harmful to
your health. A product that has been
disassembled/remodeled/repaired is
not guaranteed by the manufacturer.
• Keep the Nikon Laser Rangefinder
out of reach of children when
stored.
• If the Nikon Laser Rangefinder’s
body cover is damaged, or if it
emits a strange sound due to
dropping or some other cause,
remove the battery immediately
and stop using.
￭ Cautions before use

6
En
Fr
Es
Pt
SAFETY PRECAUTIONS
(Lithium battery)
If handled incorrectly, the battery
may rupture and leak, corroding
equipment and staining clothing.
Be sure to observe the following:
• Install the battery with the + and –
poles positioned correctly.
• The battery should be removed
when exhausted or during
extended periods of non-use.
• Do not short the end terminal of
the battery chamber.
• Do not carry together with keys
or coins in a pocket or bag, it may
short and cause overheating.
• Do not expose the battery to water,
or a flame. Never disassemble the
battery.
• Do not charge the lithium battery.
• If liquid from a damaged battery
comes into contact with clothing or
skin, rinse immediately with plenty
of water. If liquid from a damaged
battery enters the eyes, rinse
immediately with clean water, then
consult a doctor.
• When disposing of the battery,
follow your local area regulations.
this product or other small parts
out of reach of children.
• Prevent children from putting
the rubber eyecup or small parts,
etc. into their mouths. If children
swallow such parts, consult a
doctor immediately.
• If using the rubber eyecup for a
long period of time, some people
may suffer skin inflammation. If any
symptoms occur, stop using it and
consult a doctor immediately.
• When carrying the Nikon Laser
Rangefinder, store it in the case.
• If your Nikon Laser Rangefinder
should fail to operate correctly,
discontinue use immediately and
consult with your local dealer for
instructions on where to send it for
repair.
SAFETY PRECAUTIONS
(Monocular)
The Nikon Laser Rangefinder
employs a monocular in its optical
system in order to aim at the target.
Be sure to observe the following:
Warning
• Never look directly at the sun, an
intense light or the laser beam
when using the Nikon Laser
Rangefinder.
Cautions
• When not using the Nikon Laser
Rangefinder, do not push the
PWR button.
• Do not use this product while
walking. Failure to observe this
may cause injury or malfunction
as a result of walking into
something, hitting others, falling
or other accidents.
• Do not swing around by the
strap. This may result in hitting
others and cause injury.
• Do not place this product in
an unstable place. Failure to
observe this may result in falling
or dropping and cause injury or
malfunction.
• Keep the plastic bag used to wrap

7
En
Fr
Es
Pt
Storage
• Water condensation or mold may
occur on the lens surface because
of high humidity. Therefore, store
the Nikon Laser Rangefinder in a
cool, dry place.
After use on a rainy day or at night,
thoroughly dry it at room
temperature, then store in a cool,
dry place.
CARE AND MAINTENANCE
Lenses
• When removing dust on the lens
surface, use a soft oil-free brush.
• When removing stains or smudges
like fingerprints from the lens
surface, wipe the lenses very gently
with a soft clean cotton cloth or
quality oil-free lens tissue. Use a
small quantity of pure alcohol (not
denatured) to wipe stubborn
smudges. Do not use velvet cloth
or ordinary tissue, as it may scratch
the lens surface. Once the cloth has
been used for cleaning the body, it
should not be used again for the
lens surface.
Main body
• Clean the body surface with a soft,
clean cloth after blowing away dust
with a blower* lightly. Do not use
benzene, thinner, or other cleaners
containing organic solvents.
*A blower is rubber cleaning
equipment that blows air from a
nozzle.
SAFETY PRECAUTIONS
Cautions
• This product is not designed for use
underwater.
• Rain, water, sand and mud should
be removed from the rangefinder
body surface as soon as possible,
using a soft, clean cloth.
• If the Nikon Laser Rangefinder is
exposed to sudden changes in
temperature, water condensation
may occur on lens surfaces. Do
not use the product until the
condensation has evaporated.
• Do not leave the Nikon Laser
Rangefinder in a car on a hot or
sunny day, or near heat-generating
equipment. This may damage or
negatively affect it.
• Do not leave the
eyepiece in direct
sunlight.
The condenser
effect of the lens
may damage the
internal display
surface.
This symbol indicates that this battery is to be
collected separately.
The following apply only to users in European
countries.
• This battery is designated for separate collection at an
appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries
This symbol indicates that this product is to be
collected separately.
The following apply only to users in European
countries.
• This product is designated for separate collection at
an appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries

8
En
Fr
Es
Pt
[Getting to know the Laser Rangefinder]
• Measurement range of actual distance:
7.5-915 meters/8-1,000 yards
• VR (Vibration Reduction) function is employed for
reducing the vibrations caused by hand movement
• First Target Priority algorithm is employed
• First Target Priority detection sign is lit when
measuring overlapping subjects and the distance to
the closest subject is displayed
• High-quality 6x finder with multilayer coating
• Larger ocular for easy viewing
• Select from four measurement display modes
(COOLSHOT 80i VR only)
• Golf mode (default setting) displays the slope
adjusted distance (horizontal distance ± height)
which is useful for golf (COOLSHOT 80i VR only)
• Press and hold down the PWR button to activate the
continuous measurement function
• Automatic power shut-off (approx. 8 sec.
unoperated from standby screen)
• Waterproof and fogproof, but not designed
for underwater usage (the battery chamber is
rainproof)
• Invisible/Eyesafe EN/IEC Class 1M Laser
The Nikon Laser Rangefinder uses an invisible
laser beam for measuring. It measures the time the
laser beam takes to travel from the rangefinder
to the target and back. Laser reflectivity and
measurement results may vary according to
climatic and environmental conditions, as well
as the color, surface finish, size, shape and other
characteristics of the target.
The following conditions facilitate measuring:
• Cloudy weather
• Bright-colored target
• Large-size target
• When laser incidence to the target’s reflective
surface is straight
Measurement may be inaccurate or fail in the
following cases:
• In snow, rain or fog
• Small or slender target
• Black or dark target
• Target has stepped surface
• Moving or vibrating target
• When measuring the surface of water
• Target measured through glass
• When the target is glass or a mirror
• When laser incidence to the target’s reflective
surface is oblique
￭ Key features

9
En
Fr
Es
Pt
■Nomenclature/Composition
1. PWR button (POWER ON/Measurement
button)
2. Monocular objective lens/Laser emission
aperture
3 . Laser detector aperture
4. MODE button
5. 6x monocular eyepiece
6. Eyecup/Diopter adjustment ring
7. Diopter index
8. Strap eyelet
9. Battery chamber cover
10. Battery chamber cover“Open”indication
11. Product number label
12. Indication
• Body ...................................... x1
• Case ....................................... x1
• Strap ...................................... x1
• Lithium battery (CR2) ..... x1
Composition
3
1
2
10
11
6
8
5
7
9
4
12
*The carabiner-like ring that comes with the case is for the purpose of carrying the Laser Rangender only.
Do not hang anything heavy on it, nor tug on it strongly. It cannot be used for climbing.

10
En
Fr
Es
Pt
￭Internal display
: Aim at the target you want to measure. Position the target at the centre of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
 : When measuring overlapping subjects, and the distance to the closest subject is displayed,
this sign is lit.
: "Failure to measure" or "Unable to measure"
*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
Unit of measure (m/yd.)
Target mark
Laser irradiation mark
Battery condition
VR (Vibration Reduction) function-
employing model indication
First Target Priority detection sign
Measurement display mode
indications
(COOLSHOT 80i VR only)
Height (actual distance at golf
mode setting)
(COOLSHOT 80i VR only)
Distance

11
En
Fr
Es
Pt
[Functions]
■VR (Vibration Reduction) function
●ON and OFF
The VR (Vibration Reduction) function is activated concurrently when the Laser
Rangefinder is ON.
When the Laser Rangefinder is OFF, the VR (Vibration Reduction) function
automatically turns off.
■First Target Priority algorithm
When measuring overlapping subjects, First Target Priority algorithm displays the distance to the closest
subject.
■First Target Priority detection sign
When measuring overlapping subjects, such as a flagstick with trees in the background, and the distance to
a closest subject is displayed, First Target Priority detection sign* is lit in the viewfinder.
*Single measurement: When measuring overlapping subjects and the distance to a closest subject is
displayed, the sign appears.
Continuous measurement: When displayed figures shift to a closer subject, the sign appears.
First Target Priority detection sign is lit.

12
En
Fr
Es
Pt
￭Inserting/Replacing battery
1. Type of battery
3V CR2 lithium battery x1
2. Inserting/Replacing battery
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
*The battery condition mark in the internal display warns when the battery needs to be replaced.
Display Description
After power on, displays for 2 seconds only. Sufficient power available.
After power on, displays for 2 seconds only.
Power getting low.
Prepare to replace the battery.
Displayed continuously. Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically
powers o.
Power exhausted.
Replace the battery.
[First step]

13
En
Fr
Es
Pt
■Operation overview
[Mode settings]
*Unoperated for 8 seconds or longer returns you to the standby screen whichever setting mode is displayed.
Short press of PWR button (less than 1.5 seconds)
switches modes.
Long press of MODE button
(1.5 seconds or more)
Long press of MODE button
(1.5 seconds or more)
Standby Changing the distance display
unit (F1)
mYD
Short press of PWR button (less than 1.5
seconds) switches unit.
COOLSHOT 80i VR only
Short press of MODE button
(less than 1.5 seconds)
Golf mode:
Slope adjusted distance (horizontal distance ± height) and
actual distance
Horizontal distance and height mode Actual distance and
height mode
N/A Actual distance
mode
Long press of MODE button
(1.5 seconds or more)
Changing the measurement display mode (F2)

14
En
Fr
Es
Pt
Factory default setting is yard (YD).
1. From standby, a long press (1.5 seconds or more) of the MODE button displays
the setting menu of the distance display unit (F1).
2. Short press (less than 1.5 seconds) of the PWR button switches units of meter
and yard.
*For COOLSHOT 80i VR, a short press (less than 1.5 seconds) of the MODE
button displays the setting menu of the measurement display mode (F2).
3. After setting, a long press (1.5 seconds or more) of the MODE button or
unoperated more than 8 seconds returns you to standby.
■Changing the distance display unit (m/YD) (F1)

15
En
Fr
Es
Pt
■ Changing the measurement display mode (F2)
COOLSHOT 80i VR only
Modes are switched in the following order. Displayed items differ according to each setting mode.
Horizontal distance and height mode
Horizontal
distance
Height
Incline
Decline
Golf mode: Slope adjusted distance (horizontal
distance ± height) and actual distance
Slope adjusted
distance
(horizontal distance
± height)
Actual
distance
Incline
Decline
Actual distance mode
N/A Actual
distance
N/A
Actual distance and height mode
Actual
distance
Height
Incline
Decline
Factory default setting is golf mode. Golf mode displays actual distance in upper digits,
and slope adjusted distance (horizontal distance ± height) in lower digits.
1. From standby, a long press (1.5 seconds or more) of the MODE button, then a short
press (less than 1.5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2).
2. Short press (less than 1.5 seconds) of the PWR button switches the measurement
display mode.
3. After setting, a long press (1.5 seconds or more) of the MODE button or unoperated
more than 8 seconds returns you to standby.

16
En
Fr
Es
Pt
[Measurement]
Caution — Controls, adjustments or usage of procedures other than those specified herein may
produce negative effects or damage to your health due to laser radiation.
■ Measuring
1. Turn on the power.
(Automatic power shut-off after approx. 8 seconds
unoperated.)
Immediately after power-on
2. Aim at the target.
Position the target at the center of the
target mark.
Standby
*Before measuring, be sure to confirm each mode setting.
*Please refer to each section on how to set each mode.
■ Adjusting diopter
Adjust the diopter to obtain a clear internal display in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop.
Next, turn on the power and rotate the diopter adjustment ring back and forth until the internal
display comes into focus.
3. Pressing the PWR button starts measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the
PWR button during power-on, another measurement starts.

17
En
Fr
Es
Pt
Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds.
During measurement, the measured result is displayed consecutively while the laser irradiation mark is
blinking. If you release your finger from the button, continuous measurement stops.
Example of measurement
failure
Example of measured
distance display
When measuring a flagstick at a golf course, for example, keep targeting the
flagstick at the center of the target mark with the continuous measurement
function to minimize handshake.
Pressing the PWR button once starts single measurement, then displays the results.
■Single measurement
■Continuous measurement
Single measurement
Press PWR button once
Press and hold down the PWR button Continuous measurement
Standby

18
En
Fr
Es
Pt
■Specifications
Model COOLSHOT 80i VR COOLSHOT 80 VR
Measurement system
Measurement range
(actual distance) 7.5-915 meters/8-1,000 yards
Distance display (increment)
Actual distance (upper): Every 1m/yd.
Actual distance (lower): Every 0.5m/yd.
Horizontal distance/Slope adjusted
distance (lower): Every 0.2m/yd.
Height (upper):
Every 0.2m/yd. (shorter than 100m/yd.)
Every 1m/yd. (100m/yd. and over)
Actual distance: Every 0.5m/yd.
Optical system
Magnification (x) 6
Effective diameter of objective
lens (mm) 21
Angular field of view (real) (˚) 7.5
Eye relief (mm) 18.0
Exit pupil (mm) 3.5
Diopter adjustment ±4m
- 1
Others
Operating temperature (˚C/˚F) -10 — +50/14 — 122
Operating humidity (%RH) 80 or less (without dew condensation)
Power source CR2 lithium battery x 1 (DC 3V)
Automatic power shut-off (after approx. 8 sec. unoperated)
Dimensions (L x H x W) (mm/in.) 99 x 75 x 48/3.9 x 3.0 x 1.9
Weight (g/oz.) Approx. 200/7.1 (without battery)
[Technical notes]

19
En
Fr
Es
Pt
Model COOLSHOT 80i VR COOLSHOT 80 VR
Structure Waterproof (up to 1m/3.3 ft. for 10 minutes)*, fogproof Battery chamber is rainproof — JIS/IEC protection class 4 (IPX4) equivalent (under
Nikon's testing conditions)**
Electromagnetic compatibility FCC Part15 SubPartB class B, EU:EMC directive, AS/NZS, VCCI classB, CU TR 020
Environment RoHS, WEEE
Laser
Laser classification IEC60825-1: Class 1M/Laser Product
FDA/21 CFR Part 1040.10:Class I Laser Product
Wavelength (nm) 905
Pulse duration (ns) 9
Output (W) 20
Beam divergence (mrad) Vertical: 1.8, Horizontal: 0.25
*Waterproof models
This Nikon Laser Rangefinder is waterproof, and will suffer no damage to the optical system nor observation if submerged or
dropped in water to a maximum depth of 1 meter/3.3 feet for up to 10 minutes.
The Nikon Laser Rangefinder offers the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of damage to internal functions.
• Nitrogen-filled design makes it resistant to condensation and mold.
Observe the following when using the Nikon Laser Rangefinder:
• The unit is not a sealed structure, so it should not be operated nor held in running water.
• If any moisture is found on movable parts of this equipment, stop using it and wipe it off.
** The battery chamber is rainproof, not waterproof. Water may enter the device if the Rangefinder is submerged in water. If
water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
Battery life
Continuous operation: Approx. 3,300 times (at approx. 20°C)
This figure may differ according to conditions such as temperature and other factors.Use only as a guide.
・The battery supplied with this Nikon Laser Rangefinder is for operation checking. Due to natural electrical discharge, the life of this
battery will likely be shorter than that noted above.
・If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.

20
En
Fr
Es
Pt
￭Troubleshooting/Repair
If the Nikon Laser Rangefinder fails to function as expected, check the list below before consulting
your local dealer or the store where you purchased it.
●If there is a problem with the product.
Problem Cause/Solution
・Does not turn on
・Press the PWR button (top of the body).
・Check battery is inserted correctly.
・Replace the battery with a new one.
・Unable to measure
・Anomalous result
・Confirm each mode setting.
・Confirm if it can measure a large target close to you (example: a building
approx. 15m/yd. ahead of you).
・Clean the lens surface if necessary.
・Do not know if VR
(Vibration Reduction)
function is working
・Compare the vibration of the target in the viewfinder when the Laser
Rangefinder is ON and OFF.
・ While the Laser Rangefinder is ON, the VR (Vibration Reduction) function is
always activated.
・Cannot turn off the VR
(Vibration Reduction)
function
・The VR (Vibration Reduction) function is activated concurrently when the
Laser Rangefinder is ON. When the Laser Rangefinder is OFF, the VR (Vibration
Reduction) function automatically turns off.
・The VR (Vibration Reduction) function cannot be switched on and off.
・There are minute motion
sounds when the power
turns on and off
・Due to the VR (Vibration Reduction) system motor, minute motion sounds
occur. These sounds are normal, please continue to use the Laser Rangefinder.
・[ ] is displayed in the
internal display
・Failure indication. Please contact your local dealer or the store where you
purchased the product.