
4 Original Instructions
EN Nilfisk Smart
Environmental protection
• The packaging material can be recycled. Please do not
place the packaging into the ordinary refuse for disposal,
but arrange for the proper recycling.
• Old appliances contain valuable materials that can be
recycled. Please arrange for the proper recycling of old
appliances.
• Batteries and accumulators contain substances that must
not enter the environment. Please dispose of your old
appliances, batteries and accumulators using appropriate
collection systems.
Start Up
When unpacking the product, make sure that no accesso-
ries are missing and that none of the package contents have
been damaged. If you detect any transport damages please
contact your dealer.
1
1. Main appliance
2. Charger with cord and plug
3. Suction nozzle (280mm)
4. Suction nozzle (170mm) *
5. Detergent sample *
6. Sprayer bottle *
7. Sprayer head *
8. Window microfiber cloth *
9. Cloth holder for sprayer *
10. Belt/wall clip
11. LED display
12. On/off switch for appliance
13. Handle
14. Hook for belt/wall clip
15. Removable waste water container
16. Locks for waste water container
17. Release button for suction nozzle
18. Screws (2x) and Allen key *
* Only on selected models
Assemble the Sprayer
2 Mount the cloth holder for sprayer (9) with the two
screws (18) on the sprayer head (7). Attach with Allen key.
3 Fill in the detergent sample (5) in the sprayer bottle (6).
Add water until the sprayer bottle (6) is full.
Screw the sprayer bottle (6) onto the sprayer head (7) and
add the microfiber cloth (8) to the sprayer head (7). Insert
the arms of the sprayer head under the elastic bands of the
cloth and fix it with the velcro strap on the cloth.
Assemble the Main Appliance
4 Click in the preferred suction nozzle (3, 4) into the main
appliance (1). Check that the suction nozzle (3, 4) is prop-
erly fixed in the main appliance (1). Observe that the suc-
tion nozzle (3, 4) is mounted with the Nilfisk logo pointing
upwards.
Charge the Battery
5 Insert the charger delivered with the appliance into a
proper socket. Insert the charging cord plug to the back of
the appliance.
Note: During the charging process, the charge/operating
display (11) blinks (green and red). Once the battery is fully
charged, the display will be permanently illuminated green.
The charging will typically take 2 hours
WARNING
Do not leave the appliance charging for more than 4
hours.
Recharge the battery after finishing your work.
Start Cleaning
6 Adjust the spray pattern on front of the spray head ac-
cording to the application. Apply detergent to the cleaning
object by pressing the lever on the spray head. Wash the
cleaning object using the cloth. After use the sprayer can be
stored in the belt clip (10)
7 Turn on the main appliance (1) by pushing the on/off
switch (12). Once the switch is released the appliance will
start and the LED will illuminate in green. Pull the appliance
from the top to the bottom to vacuum up the detergent.
Tip: The optimal way of using the appliance is to hold it
in an angle of 45 degrees, but it can also be used in other
angles.
Note: If the battery is losing its performance, the LED will
begin to blink and the appliance will shut off after a certain
period. In this case, recharge the battery.
Switch the appliance off after each cleaned surface. This will
increase the operating time per battery charge.
After use the main appliance can be stored in the belt clip
(10).
8 Check during cleaning that the max. level (mark) of the
removable waste water container (15) is not reached. Hold
the appliance with the suction head up and check the liquid
level by levelling so the mark is horizontal.
Empty the tank
9
• Turn off the main appliance.
• Pull off the lock of the waste water container and empty
the tank.
• Close the waste water container.