Ningbo KPT-2012B User manual

Tower Ceramic Heater
Instruction manual
Model: KPT-2012B
Important Safeguards
When using electrical appliances, in order to reduce
the risk of fire, electric shock and/or injury, these
basic safety precautions should always be followed:
For Your Safety
Read all instructions carefully, even if you are quite
familiar with the appliance.
•To prevent fire or shock hazard, DO NOT expose
this appliance to rain or moisture.
•Dangerous high voltages are present inside this
enclosure. To avoid electric shock, DO NOT open
the cabinet, refer servicing to qualified personnel
only.
•To protect against fire, electrical shock and injury
to persons, do not immerse the unit, plug or cord in
water or spray with liquids.
•Do not expose this appliance to dripping or
splashing or objects filled with liquids, such as vases.
Dry location use only.
•No naked flames sources, such as candles, should
be placed on the product.
•Ventilation holes should not be impeded by any
items, such as newspaper, blankets, tablecloths,
curtains etc. Slots and opening are provided for
ventilation to ensure reliable operation of the
product and to protect it from overheating. Do not
use any object to cover this appliance.
•Do not use the appliance in a 40°C environment.
•Only connect to a suitable AC 240V~50Hz mains
wall outlet. Do not overload the wall outlet.
•Always use a fireguard when children, animals and
infirm persons can come into contact with the
heater.
•Never leave the appliance unattended when it is

in use. Never leave children unsupervised in a
room where the heater is ON and unguarded.
•Do not position this heater immediately below or in
front of a socket outlet.
•This heater is hot when in use or after use. To avoid
burns, do not let bare skin touch hot surfaces. Let
the heater cool before moving. Keep combustible
materials such as furniture, pillows, bedding,
papers, clothes and curtains well away from the
heater. Do not drape laundry or any other items
over the heater.
•Ensure that the heater is placed at a distance of at
least 50cm away from walls when in use.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory
and mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•Young children should be supervised to ensure that
they do not play with the appliance.
•Do not operate the heater with a damaged cord
or plug, or after the heater malfunctions, has been
dropped or is damaged in any manner. Seek
advice from your local qualified service
technician.
•This appliance is intended for indoor use only. Do
not use the heater outdoors.
•This heater is not intended for use in bathrooms,
laundry areas or similar moist indoor locations.
Never locate the heater where it may fall into a
bathtub or other water container.
•Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool.
•Do not run the power cord under carpeting or
cover the cord with throw rugs, runners or the like.
Arrange the cord away from traffic areas and
where it will not be tripped over.
•Do not place the cord over any part of the heater.
•Do not plug this heater into an extension lead,
double adaptor or power board.
•Do not operate unless the cord is fully extended.
•Do not attempt to repair, disassemble or modify
the appliance. There are no user-serviceable parts.
•To disconnect the heater, switch the appliance
OFF and then remove the plug from the outlet.
•Always unplug the heater when not in use.
•Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause
an electric shock, fire or could damage the
heater.
•This heater has hot electrical parts inside. DO NOT
use it in areas where gasoline, paint or flammable
liquids are used or stored.
•Use the heater only as described in this instruction
manual. Any other use is not recommended by the
manufacturer and may cause fire, electric shock
or injury. Never use the heater to dry clothes, etc.
•Always uncoil the power cord before applying

power.
Warning: In order to avoid overheating, do not cover
the heater.
Cautions:
Do not operate the appliance on an inclined surface.
Do not move the appliance while the appliance is
switched on.
In order to avoid a hazard, this appliance must not be
powered through an external switching device, such
as a timer.
Warning
If the supply cord is damaged, the cord must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Always seek advice from a qualified service technician
or electrician.
This product has not been designed for any uses other
than those specified in this booklet.
Save These Instructions
Features of Your Heater
NOTE: The remote control buttons perform the
same functions as those on the control panel of
the unit, but you will need to press the buttons.

1. LED display screen
2. ON/Standby button
3. Set TIMER or Temperature button
4. Temp. + button or TIMER + button
5. Temp. –button or TIMER - button
6. Swing button
7. Heat button(1200W or 2000W)
Your Tower Ceramic Heater
Congratulations on the purchase of your new Tower
Ceramic Heater. Before first using your Heater, it is most
important that you read and follow the instructions in
this booklet, even if you feel you are quite familiar with
this type of appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a place
and keep this booklet handy for future reference.
Your Linda Tower Ceramic Heater is safe and easy to
use. It has been designed to function quietly and safely
under normal circumstances.
This quality Linda Tower Ceramic Heater is fully portable,
with a sturdy base and a modern design.
This appliance has been designed to operate from a
standard domestic power outlet. It is not intended for
industrial or commercial use.
The surface of appliance becomes very hot when
operating. Keep children and adults away from hot
surfaces to avoid burns or clothing ignition. The
appliance will remain hot for a time after shut down.
Allow surfaces to cool before touching.

Operation of your heater
1. Before inserting the plug into an electrical outlet,
make sure that the electrical supply in your area
matches that on the rating label on the unit. Ensure
that the appliance has no damage or physical
defects. Insert the power plug into the mains outlet
with AC 240V~50Hz source, ensure that the plug
and the socket fit well.
2. When plugged in, turn on the Mains power switch
which located on the back side of the heater.
3. Turn on/Standby:
Touch ON/Standby button to switch the heater on.
Note: You may experience odours when the
appliance is switched on for the first time. To
avoid any discomfort, place the heater in a
well-ventilated area for 10 minutes when switched
on for first time.
Touch the ON/standby button again to switch off
the unit.
4. Adjust the heat mode:
You can select the desired heat mode by touching
the HEAT button.
a. Low heating (1200W)
b. High heating (2000W)
5. TIMER setting function:
This heater is equipped with a 12 hours timer. This
enables you to preset the appliance to switch off
automatically from 1 to 12 hours in 1h increments.
Touch the SET button once, “0 H” will appear on
screen and begin to flash. You can touch the "+" or
"-" buttons to set the timer.
Note: The unit will be automatically turned off when
the set time is reached. The time will be set within 5
seconds once you finish touching the button and
the time setting value will display on the LED screen
later. When the time runs out, the heater will turn
off.
You can set the timer to 0H to turn off the timer
setting function.
6. Automatic heating function:
Touch the SET button 2 times, “X”ºC will appear on
screen and begin to flash. Touch "+" or "-" buttons to
adjust the temperature as your desired comfort
setting from 15 to 35 Celsius degree. After the
temperature is set, the display will shows room
temperature.
When the room temperature reaches the preset
temperature, the heating function will cut off
automatically. When the room temperature is
lower than 3 degrees of preset temperature, the
low or high heating will turn on automatically.

7. Swing function:
To activate the Swing feature, touch the SWING
button once. Touch the SWING button again to turn
the Swing feature off.
Warning:
The heater will remain hot for some time after it is
turned off; handle with care.
Always turn off the Mains power switch and remove
the power plug from the mains outlet after use.
REMOTE CONTROL
The remote control requires one "CR2032" type 3-volt
lithium battery (included). To extend the life of the
original battery we have inserted a small clear plastic
spacer tab between the lithium battery and the
battery terminal. Please remove this battery spacer tab
before using.
•If the operation of the remote control becomes
unsatisfactory, replace with a new 3-volt lithium
battery.
1. Place the remote control with the control buttons
facing downward.
2. Touch the locking arm of the battery cover and
pull out the tray.
3. Take out the exhausted 3V CR2032 battery and
replace a new one into the battery tray with the
positive “-” side facing up, observing the polarity
markings. If the battery is placed incorrectly, the
remote control will not work.
4. Insert the battery holder into the battery
compartment.
•Using the Remote Control to operate the
appliance
1. For the best results, aim the Remote Control
directly at the remote sensor on the front
panel of the heater.
2. Do not put any objects between the Remote
Control and the heater while operating the
appliance.
3. Operate the remote control within a 3-meter
range and an angle of 60 degrees.
Notes:
1. Keep batteries out of children’s reach.
2. Remove the battery if it is exhausted or if the
remote control is not being used for a long time.
3. When there is a strong ambient light source, the
performance of the infrared remote sensor may
be degraded, causing unreliable operation.
4. Batteries contain chemical substances, so they
should be disposed properly.

Overheat protection
This product is manufactured with a heat protection
device that, in the event that the appliance is
subjected to excessive heat, the thermal cut off will
activate and switch the heater function off.
If it cuts-off due to an obstruction in the airflow, the
heater must be allowed to cool for 30 minutes and
the obstruction must be removed before restarting.
Safety Device
This appliance comes equipped with a tip over
switch. It will cut off the power due to accidental
knocking over in the event of accidentally knocking
the product over. If this occurs, take care when
handling the appliance especially avoiding the
front grill as this will still be very hot. Do not leave
the appliance in the “tipped” position.
Always ensure the unit is placed on flat stable
surface.
Specifications
Power supply: AC 120V~60Hz
Power consumption: 2000W
Care and Cleaning
Always ensure the heater has cooled completely
before cleaning and maintenance.
•Always switch off the appliance and unplug it from
the electrical socket and wait for it to cool down
before cleaning. Allow the unit to cool down
completely.
•Avoid contact with heat surfaces.
•Never spray with liquids or submerge the
appliance in water or any other liquid.
•Keep the heater clean. Do not allow any objects
to enter any ventilation or exhaust opening as this
may cause electric shock or fire or damage to the
heater.
•Do not use harsh chemicals or solvents to clean
this product and avoid using abrasive cleaning
agents. Use a slightly dampened, lint-free cloth to
clean this appliance.
•Store the appliance in its original box and in a dry
place to protect it from dust if it will not be used for
a long period of time.
Warning: NEVER immerses the unit, power cord
and plug in water or any liquid while cleaning and
never allow water to drip into the appliance.
Note: If the cordset of the appliance becomes
damaged, discontinue use. Repair should be
undertaken only by a qualified electrician or service
technician.